Best Other Special Welding Rods
100 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks
- NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to....
- HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
- PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high....
- WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and....
- AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..
Check Stock25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″
- MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
- ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
- PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
- APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
- crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
- SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....
Check Stock20 Sticks Aluminum Welding Rods ,20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉,Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair
- 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
- 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
- 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
- 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
- crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
- 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)
- MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
- ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
- PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
- APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
- crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
- SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check StockBLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free
- ...raze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
- 【Moistureproof】BLUEFIRE flux cored welding wire won't absorb water, so it can be stored in various environments for a long time. The special moisture-proof process extends its service life. Even if you can't use it up in a short time, you don't have to worry that it will affect the use effect due to moisture..
- 【Quality Assurance】All BLUEFURE brazing rods are manufactured under highest quality control. It complies with EU RoHS green standard.If you encounter any problems during use, please feel free to contact us..
Check StockHITBOX 200A ARC Welder Alkaline Electrode Weldable, 110V 220V 2 IN 1 Lift TIG/MMA VRD Continuous Welding Machine Fits Below 1/8' 4.0 mm Welding Rods,Hot Start Welder for Outdoor Home Industry Use
- ...y steel, mild steel, and zinc plated pipes. With lift tig capability, our MMA-200 can weld these materials as well as stainless steel. Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 200A, and it can handle alkaline welding rods! !!.
- Weld more types of rods-As you know, it is difficult to weld 7018 and cellulose rods with an arc welder with low no-load voltage. To meet the needs of our customers who weld these rods, we increase the no-load voltage of this welder to 78V. Now you can weld other common rods such as 7018 cellulose rods and 6013J422. You can weld 2.5mm 3.2mm rods for a long time, drag solder or weld 1/8" 4.0mm rods for 1-2 hours.
- 110V 220V Dual Voltage Arc Welder-This welding machine is 110V 220V and comes with a 35-50mm² quick connector, which can withstand higher current than other connectors. This feature allows the welder to work longer.Because of the high current, extending the weld cable to 50 meters does not attenuate the current..
- 60% duty cycle, longevity-The rated duty cycle of HITBOX MMA200 is 85% for arc welding and 50% for TIG welding. Automatic compensation for voltage fluctuation, over current protection, over load protection,....
Check Stock10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products
- MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
- ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
- PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
- APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
- SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..
Check Stock106pcs Plastic Welding Rods ABS PP PU PE PA PC TPO 7 Types of Plastic Welder Rods for Car Bumper Kayak Repair Kit with Reinforcing Stainless Steel Mesh Plastic Welding Kit Welding Supplies
- PLASTIC WELDING KIT WITH RODS: 106 pieces 12-color plastic welding rods. Includes 7 of the most commonly used plastics-(PP)polypropylene, (PU)polyurethane, (PE)polyethylene, (PC)polycarbonate, (PA)polyamide/nylon, ABS, TPO. Round welding rods are available in 7pcs colors, 8pcs for each color. Flat welding rods are available in 5 colors, 10pcs of each color. The round welding rods are 13 inches long and 1/8 inch in diameter. Flat welding rods measure 9.8 x 0.2 x 0.1inch..
- MULTIPLE PLASTIC TYPES: ABS/PP/PU/PE/PA/PC/TPO Various types of plastic repair welding rods that can help you repair car bumpers, kayaks, lawn mowers, plastic Water tanks and more broken plastic parts. Each bundle of plastic welding rods has a corresponding plastic label, which allows you to choose the type of material you need. Please determine the type of plastic you are welding and select the corresponding material, which can better provide a seamless repair for your welding job..
- WELDING RODS GOOD PERFORMANCE: The plastic welding rod has good toughness and stable moisture-proof insulation, not easy to wear and aging, suitable for repairing damaged plastic parts made of plastic. Use with the plas....
Check Stock30 Pieces Copper Aluminum Welding Rods 0.08 x 10 Inch Universal Low Temperature Welding Cored Wire Multipurpose Copper Aluminum Repair Rods for Welding Alloy, Stainless, Galvanized Steel, Copper
- Enough quantity: you will get 30 pieces of universal copper aluminum welding rods in total, enough quantity can satisfy your different needs in daily life and work.
- Multiple use: the low temperature welding cored wires can be widely applied in electric power, chemistry, food using and so on, practical repair rods for argon arc welding and filling material for aluminum, stainless, galvanized steel, galvanized cast iron, copper with high strength.
- No need solder powder: the multipurpose copper aluminum welding wires are practical and convenient to use, they come with internal powder and the melting point is 380 - 400 ℃, low temperature and no need to use other flux powder as the welding core and coating as salt base.
- Nice performance: designed with powder cores, the copper aluminum welding rods have nice forgeability, conductivity and corrosion resistance, which can provide you with smooth welding effect, suitable for home and professional maintain work.
- Size information: the universal low temperature welding core wires are approx. 2 mm/ 0.08 inches in diameter and 25 cm/ 10 inches....
Check StockTanstic 75Pcs Plastic Welding Kit, including 72Pcs 7 Types Plastic Welding Rods & Flat Welding Rods with 3Pcs Reinforcing Stainless Steel Mesh, PP PU ABS PE TPO PA PC Welding Plastic
- [Package Includes] You'll get 8pcs black(PP), 8pcs grey(TPO), 8pcs beige(ABS), 8pcs ivory(PA), 8pcs white(PE), 8pcs soft clear(PU), 4pcs hard clear(PC), 20pcs flat welding rods and 3pcs stainless steel mesh, total of 75pcs, which can meet your needs of daily use..
- [High-quality Material] Our welding rods are made of high-quality PP(Polypropylene), PU(Polyurethane), ABS, PE(Polyurethane), TPO, PA(Nylon), PC(Poly-carbonate), safe, durable, corrosion-proof and unscented, which are all common plastics in our daily life..
- [Welding Mesh] 3pcs welding meshes are also included in the package. Our wire mesh screens are made of high-quality stainless steel, which are designed to provide extra strength when used with plastic welder to repair bumper or kayak. The size is 20x15cm (7.9x5.9 inch)..
- [Assorted Welding Rods] You can distinguish rods according to different colors. Our welding rods are designed with good electrical properties and excellent insulation from humidity, not easy to wear or age. 7 different types of plastic are included in the package. You just need to choose the exact plastic you need, and our welding rod....
Check Stock150W Plastic Welder, 2 in 1 Plastic Welding Kit Plastic Repair Welder 800PCS Hot Stapler Soldering Gun with 56PCS Plastic Welding Rods Car Bumper Repair Kit for Most Plastic Repair
- 【150W Quick Heating】: The Plastic welding machine has a power of 150 watts, which is more powerful and heats up faster than other welding guns on the market. Using heat to embed staples or plastic rod into plastic, it will not harm the car and plastic surface, and it is very strong..
- 【Upgrade Accessories】: Plastic weld kits are equipped with 6 types of 800pcs hot staples, 56pcs plastic rods(ABS/PP/PE/TPE/PC/PUR/PA) for different types of repairs. The plastic rods is used in conjunction with Patch Net to effectively repair plastic surfaces. Wipe with a sponge before and after repairing to make the surface clean and smooth..
- 【Multi-purpose】: This welding repair kit can not only repair car bumper fenders, the equipped 7 types of plastic welding rods can also be used to repair various plastics such as ABS, PP, TPO, TPE, etc. Such as car dashboards, motorcycles, kayaks, canoes, children's riding toys, recycling bins and other plastic products. Using heat to embed staples or plastic rod into plastic, it will not harm the car and plastic surface, and it is very strong..
- 【Humanized Design】: The non-slip rubber ....
Check StockUpgraded Welding Machine, 110V Handheld Welder with IGBT Inverter 6 Variable Current Adjustment, Portable ARC Welder Gun Fits for 3/32"-1/8" Wire rods Electric Welder Machine Kit
- It is the perfect gift for Father, Husband, Boy Friend, DIYer..
- ✅【Upgraded Intelligent IGBT Inverter Technology】:Our ARC Welder handheld adopts advanced IGBT inverter technology. Superior arc welding performance, good arc stability, can reduce copper and iron damage, improve the efficiency and reliability of the welder, less spatter, and smooth weld, achieve perfect welding. Perfect for home DIY, professional welding and general repairing work..
- ✅【Mini & Potable Design】:The size of welding machine is about 9.8*9.45 inch, the weight is only 3.3lbs, it support welding with one hand. Such mini and portable design saves space on your workbench and looks beautifully neat. It can be used for home, offices, factories and many other places.Come with a carrying case,easy to carry to anywhere,it can also work at heights..
- ✅【Real 20-120Amp Welding Output】: Come with 20-120Amp welding output adjustable, simple knob design, 6 variable current adjustment,true current output make the welding work easier and the welding effect is more perfect..
- ✅【Supports Multiple Rods Sizes】:This portable welder machine fit for 3/32″- 1/8″(2.5-3.2mm) welding rods..And equipped with a hot arc start function.It’s a great helps when starting the arc, m....
Check Stock100PCS-Flux Core Welding Wire for Aluminum,Low Temperature Flux Cored Welding Rod Make Repair Aluminum Radiator,Ideal for Both Beginners And Professionals Alike,752°F(400°C) Melting Point.(13"/1.6mm)
- Simplified welding process: Flux-cored rods have a low melting point and do not require solder powder, making them easy to use even for beginners..
- High-quality aluminum brazing: The aluminum brazing rods come with flux already included, ensuring a durable and long-lasting bond..
- Only for Welding Aluminum - 100Pcs(13"/1.6mm)Flux Core Welding Wire are Suitable for Welding or Surfacing Welding Aluminum, Aluminum Alloy, Aluminum-Magnesium Alloy and Other White Metals,752°F(400°C )Melting Point..
- Flux Cored Aluminum Welding Rod Make Repair Aluminum Radiator Easily: Flux Core Welding Wire is Commonly Used for Repairing Aluminum Radiators in Automobiles, Motorcycles, Air Conditioners, and Refrigerators, Making it A Versatile Tool to Have In Your Toolbox..
Check Stock