Categories

Best Outer Race Bearings

Fireball Dragon Roller Skate Bearings 16 Pack - High Performance Skate Rated Rollerblade Bearings - Dragon Roller Bearing Inline Skate Bearings, Guaranteed for Life (Ceramic Bearings)

  • CERAMIC BEARINGS 608 - 16 Bearings for 8 Skate Wheels (2 Skates).
  • RACE PRE-LUBED For Fast Rollerskating - Dragon Rollerblade bearings offer ultra smooth & long lasting performance with our signature skate lubricant formula. Bearings built to perform.
  • SET OF 16 BEARINGS - 608 bearings designed to fit 8 x roller skate, scooter, rollerblade, skateboard or longboard wheels. 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle).
  • ULTRA SMOOTH SKATING - Manufactured from high grade steel w/ Nylon ball bearing cage (for reduced friction + a fluid roll) & 2 Rubber Labyrinth seals (for improved longevity and lubrication retention).
  • INCREASE YOUR PERFORMANCE - Dragon Rollerblade + Skate wheel bearings come w/ our signature Dual-Labyrinth Shields, designed to keep dirt / debris out, improving bearing lifespan up to 50%! See image.
Check Stock

Bearing Buddy Stainless Steel Bearing Protectors (1.980" Diameter) with Auto Check With Bras - Pair

  • For use with 1.968 inches (49.99 mm) hub bore, Outer Bearing Cone: M - 12649, 07100, Outer Bearing Cup (race): M-12610, 07196, weight: 1.00 lbs.
  • Prevents wheel bearing failure on boat, snowmobile, ATV, horse, RV and utility trailers.
  • Grease level is shown with Auto Check feature - Eliminates bearing repacking.
  • Keeps water and dirt out of hubs and bearings - Stainless steel components.
  • Please see measurement instructions (secondary picture) to confirm correct sizing.
Check Stock

Bearing Buddy (4) 1.980 Boat Trailer Genuine CHROME with Protective Bra & Auto Check 1980A 42202 (2 Pairs)

  • For use with 1.968 inches (49.99 mm) hub bore, Outer Bearing Cone: M - 12649, 07100, Outer Bearing Cup (race): M-12610, 07196, weight: 1.00 lbs.
  • Prevents wheel bearing failure on boat, snowmobile, ATV, horse, RV and utility trailers.
  • Grease level is shown with Auto Check feature - Eliminates bearing repacking.
  • Keeps water and dirt out of hubs and bearings - Stainless steel components.
  • Please see measurement instructions (secondary picture) to confirm correct sizing.
Check Stock

Fireball Dragon Skateboard Bearings 8 Pack - Fast 608 Longboard Bearings Set fits Skateboards Inline & Roller Skates - Precision Made & Guaranteed for Life Race

  • RACE PRE-LUBED FOR FAST SMOOTH SKATING - Ultra smooth and long lasting performance with our signature skate lubricant formula. These bearings are....
  • ULTRA SMOOTH - Unlike competitors, Dragons are made from high grade steel, w/ Nylon ball bearing cage (reduced friction & a fluid roll) & 2 Rubber....
  • INCREASE PERFORMANCE - w/ our signature Dual-Labyrinth Shields, designed to keep dirt/debris out & maximum lubricant retention. This helps improve....
  • 8 x 608 BEARING SKATE RATED BEARINGS manufactured to +/- 0.008mm. 1 Set fits 4 wheels. Order 2 sets for inline roller skate use. Specs - 22mm (outer....
  • LIFETIME BEAST GUARANTEE - for peace of mind against manufacturing defects for the life of your skateboard bearing. The perfect worry-free upgrade to....
Check Stock

Donepart 30 Pcs 608RS Bearings 608-2RS ABEC3 High Speed Miniature Bearings 8mmx22mmx7mm for Skateboards Motors Wheels Scooters 3D Printer Long Boards etc.

  • 608-2RS (I.D.=8mm, O.D.=22mm, Thickness=7mm).
  • The bearing is made of high quality chrome steel (not carbon steel) for durability and resistance to deformity under heavy loads..
  • Machine polished inner & outer race for the ultimate in smooth high speed rolling.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions..
  • Ideal for moderate load uses: skateboards, Inline skates, scooters, inline blade electric motors, wheels of bicycle, motorcycle, electric hand power....
Check Stock

Donepart 608-2RS Bearing 608 Bearings C3 High Speed 8mmx22mmx7mm Bearings Double Sealed Small Bearings for Fidget Spinner Skateboards Scooter 3D Printer etc 20pack

  • 608-2RS bearing: (I.D.=8mm, O.D.=22mm, Thickness=7mm).
  • Bearing Material: The 608 bearing is made of high quality chrome steel (not carbon steel) for durability and resistance to deformity under heavy....
  • Machine polished inner & outer race for the ultimate in smooth high speed rolling.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions..
  • Ideal for moderate load uses: skateboards, Inline skates, scooters, inline blade electric motors, wheels of bicycle, motorcycle, electric hand power....
Check Stock

Ritchey Logic Threadless Headset 1-1/8-Inch Black

  • 5/32" ball bearings in upper race to reduce weight, 3/16" bearings in lower race for durability.
Check Stock

Donepart 608RS Bearings 8mm x 22mm x 7mm 608-2RS C3 Double Sealed Rubber Shielded Pre-Lubricated Roller Bearing High Speed for Fidget Spinner Scooters Skateboard Longboard 3D Printer 10 Pack

  • 608-2RS (I.D.=8mm, O.D.=22mm, Thickness=7mm).
  • The 608 bearing is made of high quality chrome steel (not carbon steel) for durability and resistance to deformity under heavy loads..
  • Machine polished inner & outer race for the ultimate in smooth high speed rolling.
  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions..
  • Ideal for moderate load uses: skateboards, Inline skates, scooters, inline blade electric motors, wheels of bicycle, motorcycle, electric hand power....
Check Stock

Bont Skates - Precision Skate Bearings JESA 608 Black Series - Pre Lubricated Inline Speed Roller Skate Derby Skateboard Scooter - Pack of 16

  • In collaboration with JESA, Bont has created the best steel precision race bearings on the market.
  • Made in Switzerland, these bearings are made of high grade steel with 7 balls that are extremely round.
  • The inner race is double polished and pre lubricated and race ready with Kluber racing oil from Germany.
  • Dimension are 8x22x7mm pack of 16 pieces and fits 8mm axles.
  • Suitable for Inline Speed Skates, Roller Skates, Roller Derby Skates, Skateboard, Longboard, Scooter, Rollerblades, Quad Skates.
Check Stock

Venzo 1-1/8\ Threadless Mountain Bike MTB Headset Sealed Bearings White - for 34mm Cup Size ONLY

  • COMPATIBILITY: Compatible with thread-less mountain bike frame with head tube size 1-1/8". For 34mm Cup size ONLY..
  • SEALED BEARINGS: The cup bearings are sealed. It ensures very smooth performance..
  • PRECISELY MACHINED: All parts are precisely machined to match the frame head tube. We recommend using press tool to install the cups, and crown race setter to install the crown race, star nut tool for star nut setting..
  • COMPLETE SOLUTION: The package includes all the items in the pictures. Great for replacing or upgrading current headset..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide 5-year warranty! Made in Taiwan..
Check Stock

(new quality part) QUALITY MADE DRIVE BELT FOR DELTA MIDI LATHE MODEL 46-250 TYPE 2 / check more information in description

  • Rockwell/Delta 11"/14" Wood Lathe, Spindle Bearings, Set of 2.
  • These are for later model 46-111 lathes. They will not fit early model 14-111 lathes that used non-extended race bearings. It is recommend you measure your bearings prior to ordering.
  • Bearings have a 52mm OD, 25mm ID and are 15mm wide..
  • Replaces Rockwell/Delta Part Numbers: Delta part number: SP-5360 or 920-04-020-5360 or ND7705.
Check Stock

Roller Derby Elite Alpha 125mm 3-Wheel Inline Skate, 13

  • Recreational fitness inline roller skates.
  • Light weight hybrid Series aluminum 3 wheel frame with quick change axles.
  • World record racing US made 125mm 85a race wheels.
  • Extra supportive molded shell featuring dual buckle secure fit system and comfort weave liner.
Check Stock

Bearing Kit for #84 Spindle

  • Trailer Bearing Repair Kit for 1-3/8 to 1-1/16 Inch Tapered #84 Spindle (3.5k capacity) - Includes E-Z Lube Cap with Plug 1 Set Included.
  • L-68149 inner bearing- (1-3/8" inside dimension) / L-44649 outer bearing- (1-1/16" inside dimension).
  • L-68111 inner race- (2.362" outside dimension) / L-44610 outer race- (1.98" outside dimension).
  • Grease seal - (2.56" O.D - 1.72" I.D) EZ Lube Dust cap - (1.98" outside dimension).
  • This kit is for axles with a 1-3/8" to 1-1/16" tapered #84 spindle..
Check Stock