Best Outer Thread Water Saver
Deliao Brass Ball Valve Shower Head Shut-Off Valve Shower Arm Volume Control Valve Hand Shower, or Bidet Sprayer Water Saver Flow Control Valve with 1/2-Inch Female and Male Pipe Thread Nickel Finish
- Material:Brass,Nickel Finish,Drinking Water Suitable,Sturdy, Durable.
- 1/2 inch External thread x 1/2 inch Internal thread,fits most shower heads and shower arms.
- Nominal pressure:1.6Mpa(200psi),Working medium:water,oil,gas.
- Working temperature: t≤120℃,Can be used as shut-off valve,water saver valve,flow control valve,etc..
- Pressrue test conform to ISO5208,Parallel pipe thread conform to ISO228.
Check Stockhygger Bucket-Free Aquarium Water Change Kit Fish Tank Auto Siphon Pump Gravel Cleaner Tube with Long Hose Water Changer Maintenance Tool 49-FEET
- ✔️ Time Saver: Hygger Bucket-Free Water Change Kit makes routine aquarium maintenance work a breeze, saving lots of time and energy on cleaning....
- ✔️ No Bucket, Auto Siphon: Simply attach to faucet, then turn on the tap, water will automatically start to flow out of the tank through gravel....
- ✔️ Draining, Filling & Gravel Cleaning: this fish tank siphon pump enables to draining and cleaning gravel at the same time as long as filling....
- ✔️ Fits for 3-size faucets: build-in 3 size adapters that can fits female 15/16-27 thread, 13/16-27 thread or a male 55/64-27 thread, build-in....
- ✔️ Ready-to-use Kit: Hygger Water Change kit includes a gravel tube, a faucet pump and 3 faucet adapters, a 49 foot long vinyl hose and a debris....
Check StockSet of Brass Garden Expanding Hose Joint Male Pipe Adaptor Repair with Quick Connector Fitting
- Heavy-duty brass construction with rust proof. Follow the instructions when repairing water pipes, and they do not fit for thicker outer hose cloth expandable hoses..
- Pipe joint diameter is 10mm/0.39″. Note: The outer diameter of the hose should not exceed 0.47”(11.8mm). And these pipe fittings are quick connector system, not 3/4″ thread..
- Make quick, effective repairs to an expandable hoses. Suitable for most quick male end connectors (outer diameter 16mm), secure Fit, no-Leak connection. Not 3/4″ thread..
- They can be use garden hose mender, end hoses male mender, end hoses female mender..
- Include: 2 x brass female quick connectors, 1 double male quick connector.
Check Stockhygger Bucket-Free Aquarium Water Change Kit Fish Tank Auto Siphon Pump Gravel Cleaner Tube with Long Hose Water Changer Maintenance Tool 25-FEET
- ...e time as long as filling aquarium. Just move the gravel tube in a up and down motion to vacuum out debris from gravel. (NOTE: only with strong water flow can the gravel cleaning be fulfilled, agitate the gravel to suck out debris).
- ✔️ Fits for most faucets: build-in 3 size adapters that can fits female 15/16-27 thread, 13/16-27 thread or a male 55/64-27 thread, constructed with on/off valve, the valve on the faucet pump can be control water flow direction. The valve on the gravel tube can be adjusted total water flow.
- ✔️ Hygger Water Change kit includes a gravel tube for gravel cleaning, faucet pump and 3 faucet adapters to fits for most faucets and a 25 foot long vinyl hose, sturdy and flexible.
Check Stockhygger Bucket-Free Aquarium Water Change Kit Fish Tank Auto Siphon Pump Gravel Cleaner Tube with Long Hose Water Changer Maintenance Tool 33-FEET
- ...e time as long as filling aquarium. Just move the gravel tube in a up and down motion to vacuum out debris from gravel. (NOTE: only with strong water flow can the gravel cleaning be fulfilled, agitate the gravel to suck out debris).
- ✔️ Fits for most faucets: build-in 3 size adapters that can fits female 15/16-27 thread, 13/16-27 thread or a male 55/64-27 thread, build-in on/off valve, the valve on the faucet pump can be control water flow direction. The valve on the gravel tube can be adjusted total water flow.
- ✔️ Ready-to-use Kit: Hygger Water Change kit includes a gravel tube, a faucet pump and 3 faucet adapters, a 33 foot long vinyl hose and a debris vacuum head to suck out fish waste in gravel-free aquarium. Recommend for 10 gallon and up aquariums.
Check Stock
Kitchen Faucet Head Replacement, Kitchen Sink Faucet Replacement Parts, Kitchen Faucet Sprayer Nozzle, Splash-proof Spayer Head, Pull-out Sprayer Head, 3-Function, Brushed Nickel, PAKING PB3001
- THREE-FUNCTION SPRAYER HEAD: 1.Stream Flow rate: 1.8 GPM.
- 3. Sweep Spray. The splash-proof spray design is the biggest feature of the nozzle, which is so soft and delicate that it produces little splashes to the kitchen sink..
- NON-RETURN VALVE DESIGN: Built-in non-return valve works to prevent water backflow. It immediately shuts off the water when the kitchen faucet is switched off, with no more dripping..
- FILTER FILTERING IMPURITIES: The filters works to regulate water flow rates & filter impurities, proving you&your family with clean, freshed and healithy water..
- SPRAYER HEAD CONNECTION: The connection (outer diameter) of our sink faucet head is G1/2" male thread size and the 5/8 UNEF without the connector for options. Please confirm the thread size before ordering..
- DIMENSION: Overall Width: 6.69 '' Thread Height: 0.5 '' Overall Height Exclusive the Thread: 3.93'' Connection attached to the hose: G1/2 male thread size..
Check Stock360 Rotate Swivel Water Saving Tap Aerator Diffuser Faucet Nozzle Filter Adapter
- 2 Position Head – by pulling the chrome plated head, the gentle aerator spray becomes a powerful jet. A fine, built-in dirt strainer captures sand and dirt particles..
- This unit produces a champagne effect flow that negates any splash back in the basin at the same time increasing wetting ability and performance..
- To clean, simply remove the strainer and rinse it off under the water..
- Fits all standard taps with M22 external thread and internal thread M24 – gasket included Features: Save energy: Water saving 30%~70% (compared with standard bubbler) Increase the water pressure: Prevent water flowed, and the air is mixed with water is good,the water feels soft,enhanced water momentum,cleaning more convenient..
- Size : Approx.62mm/2.44inch(L)x36mm/1.41inch(bottom dia.)x21.5mm/0.85inch(top inner dia.) mm，adapter outer dia.:21.5mm /0.85inch..
Check Stock360 Rotate Swivel Water Saving Tap Aerator Diffuser Faucet Nozzle Filter Adapter（2PCS）
- *2 Position Head – by pulling the chrome plated head, the gentle aerator spray becomes a powerful jet. A fine, built-in dirt strainer captures sand and dirt particles..
- *This unit produces a champagne effect flow that negates any splash back in the basin at the same time increasing wetting ability and performance..
- *To clean, simply remove the strainer and rinse it off under the water..
- *Fits all standard taps with M22 external thread and internal thread M24 – gasket included Features: Save energy: Water saving 30%~70% (compared with standard bubbler) Increase the water pressure: Prevent water flowed, and the air is mixed with water is good,the water feels soft,enhanced water momentum,cleaning more convenient..
- *Size : Approx.62mm/2.44inch(L)x36mm/1.41inch(bottom dia.)x21.5mm/0.85inch(top inner dia.) mm，adapter outer dia.:21.5mm /0.85inch..
Check Stockuxcell 20pcs Rubber End Caps 1/4\(6mm) ID Vinyl Round Tube Bolt Cap Cover Thread Protectors Black
- 【Widely Application】1. All kinds of pipe ends protection: plastic pipe, metal pipe, oil pipe, water pipe, vacuum pipe.
- 2 Thread protection: bolt, screw, nut thread protection.
- 【Widely Application】3. For shelf, fence, rail protection.
- 4. For furniture, chair, dining table, stool, hammock decoration protection.
- 5.For hole cover, protect, decorate, seal (drain hole).
- 【Size Selection】Because rubber material is soft and elastic, we recommend choosing rubber end cap that is slightly smaller than the outer diameter of the product to be protected. For example: the outer diameter of your product is 9.8mm dia, choose the rubber cover of 9.5mm!.
- 【Rubber Material】Soft, Elastic, Accurate Size, Oil Resistance, Heat Resistance, Dust Resistance, Long Service Life.
Check Stock360 Rotate Swivel Water Saving Tap Aerator Diffuser Faucet Nozzle Filter Adapter …
- 2 Position Head - by pulling the chrome plated head, the gentle aerator spray becomes a powerful jet. A fine, built-in dirt strainer captures sand and....
- Materials: plastic+stainless steel；Product Weight: 28g.
- To clean, simply remove the strainer and rinse it off under the water..
- Fits all standard taps with M22 external thread and internal thread M24 - gasket included Features: Save energy: Water saving 30%~70% (compared with....
- Size : Approx.62mm/2.44inch(L)x36mm/1.41inch(bottom dia.)x21.5mm/0.85inch(top inner dia.) mm，adapter outer dia.:21.5mm /0.85inch..
Check Stock
Embroidery Floss Cross Organizer Box Tools - Bobbin Winder, 1 Removable 36 Compartments with 120 Hard Plastic Floss Bobbins and Floss Number Stickers for Craft DIY Embroidery Sewing Storage(127pcs)
- 36-Grid Detachable Storage Box — Our storage box is big storage box with 36 removable grids, suitable for storing threads, needles, beads, thimble, needle threader, and other tools.You can pull out the dividers and the big spaces are good to keep the bobbins. The outer box size is 10.8″ L x 7.0″ W x 1.8″ H, and the grid size is 1.7″ L x 1.1″ W x 1.7″ H.
- 120 pcs 3 Color Floss Bobbins — Made of plastic material, sturdy and durable, the are 3 colors blue pink white and 40 pieces each color, you can wrap the embroidery thread around this, each bobbin are designed with considerate parts on both ends, fixing the threads and will not slip off easily.
- Floss Bobbins Winder — Easy to use, if you want to classify lots of threads in various colors, if you wrap by yourself, it may take much time, but with the help of the floss winder, it will make winding more conveniently and easier, good time saver for your working.
- 2 kinds Number Stickers To Customize Your Own Floss Bobbins — 2 pcs includes 500 Labels, Pre-Printed With All 464 Solid And Variegated Color Numbers and 2 pcs blank stickers.
- Wide Application — The cross stitch floss could be applied for making friendship bracelets, children’s crafts, cross stitch projects, tassels, art and craft....
Check Stock
Sewing Thread 100 Colors 40S/2 250 Yards Per Spool 3 Color Sets Options (100 Colors with Storage case)
- ◎ BEST THREAD SPOOLS ORGANIZER: With these 100pcs thread spool savers, you can be completely free from the messy days when wild ends of thread unwind all over the place and get tangled with other spools. Besides, these thread spool huggers also perfectly provide an appropriate hold to maintain the thread tension..
- ◎ SPACE SAVER: These thread spool huggers are thin enough to create no space issue when being stored in your thread rack or case, in the meantime, they can firmly hold thread spools to keep thread tails from unraveling and loosing tension. Very simple way to make your thread spools to be orderly organized..
- ◎ FLEXIBLE MATERIAL TO FIT DIFFERENT SIZE SPOOLS: These thread spool savers are made of superior silicon with high flexibility that can be twisted in any way, which makes them fit to various size of home sewing and embroidery thread spools.【NOTE: They are NOT suitable for commercial, industrial or jumbo size spools!!!】.
- ◎ REUSEABLE DESIGN: With the flexible silicon material, these thread spool huggers will always curl back to original shape after taking from spools. You can adjust them to fit other spools even after repeated using. Very durable for years..
- ◎ DESIRABLE GIFT FOR EMBROIDERY ENTHUSIATS: These thread spool savers / ....
Check StockPC4-M6 Pneumatic Fitting Push to Connect + PC4-M10 Straight Quick in Fitting for 3D Printer Bowden Extruder 20pcs
- PC4-M6 fittings:thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
- PC4-M10 fittings: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm.
- PC4-M6 Fittings: made of Copper, PC4-M10 Fittings is made of stainless steel.
- Easy to install:connecting by the outer thread of the quick fitting.
- Compatibility: compatible with 1.75mm PLA ABS 3D printer.
Check Stock
