Best Oxyfuel Cutting Machine

3 PACK SÜA - 3-GPN Propane Cutting Tip - Compatible with Victor Sizes 00 0 and 1 SMALL TIP SERIES

SÜA 25' Heavy Duty Straight Cutting Torch 90º Head

• Die Forged Brass and Stainless Steel Heavy Duty OxyFuel Cutting Torch Compatible with Harris.
• Uses Series 6290NX Propane and 6290NXP Propylene Cutting Tips - Gas Service: Oxygen and Propane/Propylene with appropriate tips..
• Can cut up to 3" (76 mm), with included 6290NX-3 (propane), tip and up to 8" (203 mm), with additional tips. See tip chart for reference.
• Head Angle: 90 ° - Weight of Torch: 3 Lb - Gas Inlets 9/16" - 18 R and L (B-B Connectors for Twin Welding Hose).

2 Oxy Acetylene Cutting Torch Tips 144-1 fits Airco

• Thickness: 10-20 Preheat: 0.7 Oriffce:1.2.

Acetylene Cutting Tips 1-101 Size 1 for VICTOR Style Torch 2pk

• Thickness: 6-10 Preheat: 0.6 Oriffce:1.0.

Lincoln Electric Cutting & Grinding Goggles | Shade 5 | Anti Fog | Anti Scratch| K3118-1

• INFARED (IR) PROTECTION – Made from a special polycarbonate to offer IR 5.0 protection for use in grinding, oxyfuel cutting, plasma cutting and more.
• VENTED RUBBER FRAME – The rubber outer frame provides a secure seal while the strategically placed vents improve airflow to reduce fogging / prevent....
• ANTI-SCRATCH – The lenses are coated with an anti-scratch layer for added resistance versus sharp or pointed particulate.
• ANTI-FOG – The inside of polycarbonate lenses are coated with anti-fog layer for use in hot, cold or humid environments..
• ELASTIC HEADBAND – The adjustable elastic headband provides a snug, secure fit..

Lincoln Electric Cutting & Grinding Goggles | Shade 3 | Anti-Fog | Anti Scratch| K3118-2

• INFARED (IR) PROTECTION – Made from a special polycarbonate to offer IR 3.0 protection for use in grinding, oxyfuel cutting, plasma cutting and more..
• VENTED RUBBER FRAME – The rubber outer frame provides a secure seal while the strategically placed vents improve airflow to reduce fogging / prevent dry eyes..
• ANTI-SCRATCH – The lenses are coated with an anti-scratch layer for added resistance versus sharp or pointed particulate..
• ANTI-FOG – The inside of polycarbonate lenses are coated with anti-fog layer for use in hot, cold or humid environments..
• ELASTIC HEADBAND – The adjustable elastic headband provides a snug, secure fit..
• UV PROTECTION - Polycarbonate lens provides 99% UV protection..
• TRUSTED BY PROFESSIONALS – These safety goggles are used by professional fabricators on a daily basis..

Lincoln Electric Inferno Weed Burner Propane Torch Kit w/ 10” LP Gas Hose and Flint Striker, 500,000 BTU High Output, Heavy Duty for Road Repair, Roof, Brush, Ice Snow Melter, KH825-03

• ...h 9/16”-18 B fitting to work with propane cylinders, and a Flint Striker.
• ABOUT LINCOLN ELECTRIC: For over 125 years, Lincoln Electric has focused on the design, development and manufacture of arc welding products, automated joining, assembly and cutting systems, plasma, oxyfuel cutting, brazing and soldering alloys.

REV X E85T0501 E85 Gasoline Tester - Easy to Use Ethanol Test Kit

Cricut Variety Pack(1 StrongGrip, 1 LightGrip, 1 StandardGrip) Adhesive Cutting Mat 12

• Works with the Cricut explore machine, Cricut expression machine, and Cricut expression 2 machine.
• One 12" x 12" standard grip adhesive cutting mat, one 12" x 12" light grip adhesive cutting mat, and one 12" x 12" strong grip adhesive cutting mat.
• Recommended materials for standard grip adhesive cutting mat: cardstock, pattern paper, embossed cardstock, iron-on, and vinyl.
• Recommended materials for light grip adhesive cutting mat: printer paper, thin cardstock, vellum, construction paper, and vinyl.
• Works with the Cricut Explore machine, Cricut Expression machine, and Cricut Expression 2 machine.
• One 12" x 12" StandardGrip adhesive cutting mat, one 12" x 12" LightGrip adhesive cutting mat, and one 12" x 12" StrongGrip adhesive cutting mat.
• Recommended materials for StandardGrip adhesive cutting mat: Cardstock, Pattern paper, Embossed cardstock, Iron-on, and Vinyl.
• Recommended materials for LightGrip adhesive cutting mat: Printer paper, Thin cardstock, Vellum, Construction paper, and Vinyl.
• Recommended materials for StrongGrip adhesive cutting mat: Thick cardstock, Glitter cardstock, Magnet material, chipboard, Poster board, and Fabric with stiffenerDescriptionCRICUT CUTTING MAT 12X12 VARITY 3 PACK.

SÜA - RG-45 - Oxy-Acetylene Carbon Steel Welding Rod (R45) - 36' x 1/16' (2 Lb)

• SÜA RG45, (RG-45), is a copper-coated, low-carbon steel, oxyfuel gas welding rod used for welding ordinary low carbon steel..
• RG45 weld deposits are ductile and porosity-free. Commonly used on steel sheets, plates, pipes, castings, and architectural projects.
• Its typical minimum weld tensile strength is 45 ksi and it conforms to AWS A5.2 R45. RG45 - No flux required.
• READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
• Available Diameters: 1/16", 3/32", 1/8" and 5/32" - Available Packages: 1 Lb, 2 Lb, 5 Lb and 10 Lb. Select your choice from the size menu options..

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

• Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
• Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
• 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
• CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....

Invisible Man

• A small investment can make a huge improvement in the cutting performance of your machine.
• Getting the best cutting performance from your Prestige Pro machine can be as simple as changing the PR standard cutting pad.
• This PR Standard Cutting Pad measures 9 7/8" x 18"..
• The many significant advantages of the extended length of this PVC vinyl Cutting Pad are an increased work surface, the ability to shuttle multiple dies through the machine for quicker cutting and for easy registration of ClearCrop Dies..
• Cutting pads need replacement generally after 4-6 months.

Cuttlebug Cutting Plate B 6'X13'-

• Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
• Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
• The see-through PC plastic allows easy placement of materials for a precise die cut..
• Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
• The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..