Categories

Best Oxygen Sensor Harness

GlowShift Gauge Package Compatible with Subaru Impreza WRX STI 2002-2007 - Tinted 7 Color 30 PSI Boost/Vacuum, 100 PSI Oil Pressure & Digital Wideband Air/Fuel Gauges - Fiberglass Triple Dashboard Pod

  • GlowShift Gauge Package Compatible with the Subaru Impreza WRX 2002-2007 features a Fiberglass Triple Dashboard Pod, 3 Tinted 7 Color Series Gauges, Oil Galley Plug Adapter & an Add-On Clock Power Harness.
  • Includes 30 PSI Boost/Vacuum Gauge with 6’ Silicone Hose & T-Fitting - 100 PSI Oil Pressure Gauge with 1/8-27 NPT Sensor & 9' Sensor Harness - Digital Wideband Air/Fuel Ratio Gauge with Oxygen Sensor, Weld-In Bung, Control Box, 10' Sensor Harness, 7' Gauge to Control Box Harness, 5' Power Harness & 3' Data Logging Wire - Tinted 7 Color Series Features a Black Dial, Tinted Lens, 7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style.
  • High Quality Fiberglass Dashboard Gauge Pod Replaces the Factory Clock & Mounts in its Position - Stronger Design than ABS Plastic - Features a Dome Lip to Prevent Sun Glare on Gauges.
  • Oil Galley Plug Adapter Installs the Oil Pressure Sensor to the Vehicle's Engine - Add-On Clock Power Harness Powers All 3 Gauges from 1 Unit - Plugs into the Factory Clock Connector - Compatibl....
Check Stock

Dianrui 2Pcs Stainless Steel Mounting Fitting with Holes including 2pcs Brass Gasket,35mm Mounting Fitting Accessories Straight Thread Connector Plug K1-035-1

  • These extensions are great for custom exhaust, moving the O2 sensor placement, or needing more slack for the O2 sensor wiring. These harnesses are a direct plug and play extension for the oxygen sensor and requires no splicing..
  • Compatible with Dodge Jeep Chrysler SRT RAM 1500 Charger.
  • O2 Sensors are not included, these are extension harnesses to allow a longer reach of the existing O2 sensor harness..
  • Each purchase will receive (4) Plug-and-Play oxygen sensor extension harnesses. (2) 24" and (2) 12" extensions are included..
  • Condition:100% new and tested before shipment..
Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool

  • PackageIncludes 2 7/8" 3/8 Inch Drive Vacuum Switch Sockets and One 7/8" x 1/2" drive Oxygen Sensor Socket.
  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Usage Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • ...it for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 12pt socket + (1) 27mm oil pressure sending unit socket + (1) 1-1/16 and 1 inch oil pressure sending unit socket + (1) 7/8 inch long oxygen sensor socket wrench + (1) 7/8 inch short oxygen sensor socket wrench + (1) carrying case.
Check Stock

EWK 22mm 7/8 Inch O2 Oxygen Sensor Flex Head Wrench Removal Tool

  • 【 Flexible Operation 】Goes into narrow space and odd angles with the unique contour handle. EWK oxygen sensor removal tool works around the exhaust and gets to places ordinary wrenches won't. Easy to remove or install the hard-to-reach and stuck O2 sensors..
  • 【 Extra Leverage 】Swiveled head helps create extra leverage in narrow areas. The 22mm oxygen sensor wrench helps getting additional clearance during the job. Effortlessly turns the removal job into a breeze..
  • 【 Slotted Design 】 Get to the O2 sensor from the side to prevent damaging the wire or the sensor. Keeping the wire harness attached by getting to the sensor from the side instead of from the top..
  • 【 Great Compatibility 】EWK O2 sensor remover is designed to work on 7/8″(22mm) O2 sensors. Compatible for Ford contours, 4.6L, 5.4L Ford modular engines. Covers most vehicles on the market..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Michigan Motorsports GREY 02 Oxygen Sensor Extension Square 4 Pin LS1 LS2 O2 Wire Harness Gray 24 inches long

  • GREY 02 Oxygen Sensor Extension Square 4 Pin LS1 LS2 O2 Wire Harness Gray 24".
  • QTY 2 24 inch Grey Square Connector O2 Sensor Extensions.
  • This listing is for two 24" grey square connector oxygen sensor extensions. They will work on many GM application besides those listed..
  • Look carefully at the connector pictures to verify they are what you need, ask if you are unsure..
  • Fitment information: 08-09 G8 GT V8 2004 LS1/LS6 Corvette (front sensors) 04-06 LS1/LS2 GTO (front sensors) 04-05 LS6 CTS-V (front sensors and rear)....
Check Stock

8MILELAKE 21pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

  • Ideal for the removal and installation of oxygen sensors, oil pressure sending units, oil pressure switches, vacuum switches equipped and thermal sensor switches.
  • Slotted design allows removing oxygen sensor with wiring harness attached and prevents damage to wires.
  • Heavy duty Forged sockets constructed from Chrome Vanadium alloy steel with black finish for lasting lifetime.
  • The perfect tool kit for the professional mechanic or DIY enthusiast..
  • All the tools are well organized in a blow molded case for easy transportation, simple storage, and quick identification..
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

Michigan Motorsports Knock Sensor Adapter for 1997-2004 LS1 LS6 Car to LS2 LS3 Knock Sensor

  • Knock Sensor Adapter for 1997-2004 LS1 Car to LS2 Knock Sensor.
  • This harness allows the dual-wire LS2 knock sensors located on side of the LS2 engine block to be plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Compatible with the PCM harness in LS1 Corvette and F-Body cars..
  • PLEASE NOTE THAT IN ORDER TO USE LS2 KNOCK SENSORS IN A LS1 CAR YOU REQUIRE SPECIAL LS1 PCM SOFTWARE CHANGES OR A LS2 PCM..
  • KEY FEATURES: Fully Plug and Play with the factory harness & sensors Military spec. high-temperature Teflon wire (same type used on oxygen sensors) 24" Length High-temperature (1200F) heat treated protective loom All connections crimped using our computerized crimp-quality monitoring system and then circuit checked for the utmost in reliability..
Check Stock

GlowShift Tinted Series Wideband Air/Fuel Ratio AFR Gauge Kit - Includes Oxygen Sensor & Weld-in Bung - Blue Digital LED Display - Smoked Lens - 2-1/16" 52mm

  • GlowShift Tinted Series Wideband Air/Fuel Ratio Gauge is Essential for Mapping Out the Air to Fuel Ratios of Your Performance Vehicle.
  • Wideband Air/Fuel Ratio Readings from 10.0 to 20.0 AFR.
  • 2-1/16" (52mm) Gauge with Black Dial, Tinted Lens & Red Illuminated Needle - White LED Backlighting.
  • Includes 4.9 LSU Wideband Oxygen Sensor, Weld-In Bung, Control Box, 10' Sensor Harness, 7' Gauge to Control Box Harness, 5' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

GlowShift Tinted 7 Color Analog Needle Wideband Air / Fuel Ratio AFR Gauge - Includes Oxygen Sensor Data Logging Output & Weld-in Bung - Black Dial - Smoked Lens - 2-1/16 52mm

  • GlowShift Tinted 7 Color Series Analog Wideband Air/Fuel Ratio Gauge is Essential for Tuning & Mapping Out the Air to Fuel Ratios of Your Performance....
  • Wideband Air/Fuel Ratio Readings from 10 to 20 AFR - 2-1/16" (52mm) Gauge with Black Dial, Tinted Lens & Illuminated Red Needle.
  • 7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle -....
  • Includes 4.9 LSU Wideband Oxygen Sensor, Weld-In Bung, Control Box, 10' Sensor Harness, 7' Gauge to Control Box Harness, 5' Power Harness, 3' Data....
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

GlowShift Black 7 Color Analog Needle Wideband Air / Fuel Ratio AFR Gauge - Includes Oxygen Sensor Data Logging Output & Weld-in Bung - Black Dial - Clear Lens - 2-1/16 52mm

  • GlowShift Black 7 Color Series Analog Wideband Air/Fuel Ratio Gauge is Essential for Tuning & Mapping Out the Air to Fuel Ratios of Your Performance....
  • Wideband Air/Fuel Ratio Readings from 10 to 20 AFR - 2-1/16" (52mm) Gauge with Black Dial, Clear Lens & Illuminated Red Needle.
  • 7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle -....
  • Includes 4.9 LSU Wideband Oxygen Sensor, Weld-In Bung, Control Box, 10' Sensor Harness, 7' Gauge to Control Box Harness, 5' Power Harness, 3' Data....
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

GlowShift White 7 Color Analog Needle Wideband Air / Fuel Ratio AFR Gauge - Includes Oxygen Sensor Data Logging Output & Weld-in Bung - White Dial - Clear Lens - 2-1/16 52mm

  • GlowShift White 7 Color Series Analog Wideband Air/Fuel Ratio Gauge is Essential for Tuning & Mapping Out the Air to Fuel Ratios of Your Performance....
  • Wideband Air/Fuel Ratio Readings from 10 to 20 AFR - 2-1/16" (52mm) Gauge with White Dial, Clear Lens & Illuminated Red Needle.
  • 7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle -....
  • Includes 4.9 LSU Wideband Oxygen Sensor, Weld-In Bung, Control Box, 10' Sensor Harness, 7' Gauge to Control Box Harness, 5' Power Harness, 3' Data....
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock