Best Oxygen Sensor Socket

Offset Oxygen Sensor Socket 3/8-Inch Drive 7/8-Inch 22mm Wire Gate Accesses Sensor from Side Preventing Damage to Wires Universal for Most Cars

  • PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function.....
  • DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8" drive oxygen sensor socket is....
  • FEATURES: 7/8" (22mm) socket fits most oxygen sensors, works with any 3/8" drive ratchet or breaker lever, offset drive gate with wire links the....
  • FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this....
  • WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time,....
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....
Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
  • This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
  • Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..
Check Stock

GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

  • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
  • Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
  • Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
  • Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
  • Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
  • Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
  • Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
  • Durable blow mold case for safe storage and tool retention.
Check Stock

HYAT 5pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines.
  • 3 Different types of sockets cover various situations of oxygen sensor locations.
  • Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires.
  • Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

Bosch 17018 Original Equipment Wideband Oxygen Sensor for Select 2000-02 Subaru Forester, Impreza, Legacy, and Outback Vehicles

  • Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots.
  • Slotted design allows removing oxygen sensor with wiring harness attached.
Check Stock

HFS (R Automotive Oxygen Sensor Socket Set (3PCS Socket Set)

  • Designed for the removal and installation of oxygen sensors, pressure sending units, and vacuum switches equipped with wires or vacuum tubes.
  • Including 7/8" Short low Profile O2 Oxygen Sensor Socket, 7/8" Universal Oxygen Sensor Socke 7/8" Universal Vacuum Switch PVS, TVS Socket Tool..
Check Stock

8MILELAKE 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

  • 10Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
  • Sensors, Injectors, Oil Pressure Sending Units And Vacuum Switches. Heat-treated Chrome.
  • Vanadium And Chrome Molybdenum Steel With Black Oxide Finish Accepts Either 3/8 Or 1/2"".
  • Drive Ratchet Depending On The Size of The Socket 10Pc Oxygen Sensor & Diesel Injection Oil.
  • Pressure Unit Vacuum Switches Socket Set Heat Treated Chrome Vanadium & Chrome Molybdenu.
Check Stock

3/8-Inch Drive Oxygen Sensor Socket Offset Wrench Remover Tool

  • PackageIncludes 2 7/8" 3/8 Inch Drive Vacuum Switch Sockets and One 7/8" x 1/2" drive Oxygen Sensor Socket.
  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Usage Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Service 100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

ITEQ 7/8 Inch (22 mm) 6-Point by 1/2 Inch Drive Offset Oxygen Sensor Socket with Wide Side Cutout for Preventing Damage to Wires

  • Perfect tool for removing, inspecting, replacing and installing heated and non-heated oxygen sensors on most vehicles with computer-controlled engines.
  • The 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 1/2” drive and 7/8” ends can be used with both ratchet and torque wrench.
  • The oxygen sensor socket's special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Made of high-quality Chrome vanadium steel for extra strength and durability.
  • Suitable for oxygen sensors found on most modern vehicles.
Check Stock

aremnry 7pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set Vacuum Switch Socket Removal Installer Tool Kit

  • 【Applications】 Designed for the removal and installation of oxygen sensors, oil pressure sending units and vacuum switches equipped with wires or vacuum tubes..
  • 【Material Solid】 Heat treated chrome vanadium & chrome molybdenum steel (CR-V) with black oxide finish for corrosion resistance..
  • 【Including】7/8" Short low Profile O2 Oxygen Sensor Socket, 7/8" Universal Oxygen Sensor Socke 7/8" Universal Vacuum Switch PVS, TVS Socket Tool..
  • 【Function】 This set can work in the tight space around an O2 sensor to remove or install quickly and efficiently..
  • 【Easy Storage】Comes in a blow molded case for safe & easy transport and storage..
Check Stock

Apeixoto Oxygen Sensor Removers 5PCS Oxygen Sensor Sockets with Packing Case Oxygen Sensor Socket Set Removal Tool

  • Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum switches and fuel injections. These tools can be used most vehicles..
  • Package: The package includes 5pcs sockets and wrenches included in the red case.The whole tool set comes in a solid red case which will protect the tools well during shipping and let you keep the tools well after usage..
  • Specifications: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: The Apeixoto oxygen sensor removers and oil Pressure Sending Units are constructed with heat-treated chrome vanadium steel. It is totally rust and corrostion resistant. The surface has a black powder and it looks much more shinny..
  • Warranty: 100% satisfaction. If you come across any issue or need any assists during usage, we are here to help..
Check Stock