Juried Engineering TL081CP TL081 High Slew Rate JFET-Input Operational Amplifier Op-Amp IC Breadboard-Friendly DIP-8 (Pack of 10)

  • The TL081CP JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit..
  • Low Power Consumption: 1.4 mA/ch Typical, Low Input Bias Current: 30 pA, Typical Low Input Offset Current: 5 pA Typical, High Slew Rate: 13 V/μs Typical.
  • Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% Typical, Wide Common-Mode and Differential Voltage Ranges, Common-Mode Input Voltage Range Includes VCC+.
  • High Input Impedance: JFET Input Stage, Latch-Up-Free Operation.
  • Example Applications: Tablets, White goods, Personal electronics, Computers.
Check Stock

dbx DriveRack PA2 PA Management System w/ RTA-M Measurement Microphone, Cables Bundle

  • Specially Priced Package includes the DBX Driverack PA2 with all items as packaged by DBX, PLUS:.
  • (1) DBX RTA-M Measurement microphone to perfectly calibrate your system.
  • (1) 50ft. XLR Cable to connect the RTA-M from anywhere in your venue.
  • (8) 20ft. XLR cables to connect the Driverack to your mixer, and to connect all 6 outputs (Stereo Low, Mid and High Channels) to your power amplifiers..
  • Sonic Sense One-Year Extended Warranty Adds One Year to Manufacturer's Warranty.
Check Stock

Rockville 15\ Church Speakers+Mixer+Stands+Mics+Bluetooth 4 Church Sound Systems

  • ... 4 ohm (2 x 8 ohm) speakers. 4 balanced XLR microphone inputs. Tape/CD Line inputs. 10 total inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control. Line Out for connection to external amplifiers. Return input for connection of external effects processors. Record Out for taping.
  • RF interference protection on all inputs. Aux Send Output: -10 dBv nominal, 1k ohms. Tape Rec Output: -10 dBv nominal, 1k ohms. Input lmpedance: Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms. Input Channel Equalization: +/- 15 dB @ 5 kHz. 3 Band equalizer: Bass: +/- 15 @ 60 Hz Mid: +/-15 @ 1 kHz Treble: +/- 15 @ 10 kHz. Protection Circuit: Power on Mute delay time: 2 seconds. Microphones. Rockville RMM-XLR Dynamic Microphone. Professional 10 FT XLR Cables Included.
Check Stock

2X 250W Class D Audio Amplifier Board Amplifier IC IRS2092 Sure AA-AB32291

  • It integrates high performance IRS2092 supporting dual channel audio amplification. Both of channels.
  • Both of channels are capable of outputting nominal power simultaneously and continuously. It’s suitable for amplifier enthusiasts or hobbyists to finish a complete amplifier system..
  • high performance inductors are used to gain the perfect timber, finally realize high S/N ratio, low THD+N, wide frequency response range etc..
  • Applications: Home theater receiver Car audio Background music systems Musical instrument amplifiers Prototype for recording studios, Post-production, Live sound and Hi-Fi applications PA system.
Check Stock

UWAYKEY 35W Audio Tube Amplifier with TDA7377 Chip, HiFi Stereo Receiver Integrated Amp with Bluetooth 5.0, Hybrid Amp for Home Theater System

  • About ZK-152H Tube amplifier: ZK-152H is a hybrid tube power amplifier, which uses tube as the front stage power amplifier and class AB power amplifier chip as the combination method of the rear stage. This combination method neutralizes the advantages and disadvantages of Class A power amplifiers and Class AB power amplifiers. ZK-152H Tube amplifier allows you to taste the "taste" of tube amplifiers at a low price instead of the cold "digital taste" of digital power amplifiers..
  • This tube power amplifier uses the TDA7377 chip, which is a class AB power amplifier chip. The professional fully complementary output stage structure and internal fixed gain ensure that the output is not distorted at high power. We changed the output power of the chip to 35w by means of bridge connection. This output power is not a beautiful figure in the face of digital power amplifiers, but its sound quality is far better than digital power amplifiers, especially when playing human voices..
  • How Many Input Methods Are There: ZK-152H tube amplifier provides two input modes: Bluetooth mode and RCA mode, the switching between modes can be switched by physical buttons. At the same time, the tube amplifier can also input audio signals through AUX 3.5mm..
Check Stock

Yorkville CA1 Amplifier 70 Volt 6 Channel Public Address Amp Rack Mountable Steel Chassis Black

  • Versatile input mixing capabilities make the CA1 the solution for small churches, boardrooms and conference room PA applications..
  • Unlike most installation amplifiers in this class, user selectable phantom power is available on three channels to drive condenser microphones, the type most commonly used on podiums or as a lavaliere (tie clip) microphone..
  • XLR / TRS balanced combi-jack inputs and attenuated RCA unbalanced inputs ensure the CA1 system can interface with any source (CD, Cassette, Satellite Tuner, DVD or video system) your installation may require..
  • Capable of driving either a 4-ohm speaker load, or four separate 70-volt speaker systems (one 'system' per zone), the CA1 system delivers 180 watts (mono)..
  • A pre-amp output is available to feed an auxiliary power amplifier or active subwoofer to enhance the system, or to feed video or audio recording equipment..
Check Stock

WAVLINK AC600 Outdoor WiFi Upgrade Version Extender,Weatherproof Internet Long Range Signal Booster,Wireless Dual Band 2.4+5G Repeater/Router/AP with POE,No WiFi Dead Zones for Outdoor WiFi Coverage

  • ...limates of extreme cold, heat or continuous moisture.
  • Robust weatherproof case withstands harsh outdoor conditions.
  • Withstanding broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F).
  • 15KV ESD, 4KV lightning protection, ensure stable connection in harsh outdoor conditions.
  • ✅【Built-in High Power Amplifiers】- High Power Amplifiers PA+LNA 600mW and enhanced receiver design increase transmission power up to 5x . More strong penetration & longer range coverage than the general access point, ideal for providing Wi-Fi service in big area such as factory, community, street or etc.
  • ✅【2 x 7dBi Detachable Omni Directional Antennas】- Feature 2 x RP-SMA connectors for external antennas, and higher antenna gain extensively strengthens Wi-Fi signal and expands wider coverage in the open air, stability technology automatically avoids channel conflicts using its channel selection feature, meet outdoor long range coverage wireless network requirement, cover hard-to-reach dead zones.
  • ✅【Multi Operation Modes】- The Outdoor Wi-Fi Access Point has integrated Power over Ethernet (PoE) support, allowing it to be installed in areas where power outlets are not readily available by combing your power and network data connection into a singl....
Check Stock

Alto Professional TS312S | 2000 Watt 12 Inch Powered Portable PA Subwoofer With Selectable DSP Output Modes For Matching With Companion PA Speakers

  • Superior Sound for your PA System: 12 inch 2000W active subwoofer speaker with high efficiency class D amplifiers.
  • The Perfect Match: XLR outputs, with six discreet DSP output modes for ideal matching with companion PA speaker.
  • Setup Simplified: Lightweight, portable PA cabinet design for easy transport, set up and installation.
  • Feature-Packed: Extended LF switch for increased EQ control.
  • Electronic clip, thermal and transducer overdrive protection.
  • Precision Engineered: Rugged finish always looks good, even with heavy use.
Check Stock

Alto Professional TS315S | 2000 Watt 15 Inch Powered Portable PA Subwoofer With Selectable DSP Output Modes For Matching With Companion PA Speakers

  • Superior Sound for your PA System: 15 inch 2000W active subwoofer speaker with high efficiency class D amplifiers.
  • The Perfect Match: XLR outputs, with six discreet DSP output modes for ideal matching with companion PA speaker.
  • Setup Simplified: Lightweight, portable PA cabinet design for easy transport, set up and installation.
  • Feature-Packed: Extended LF switch for increased EQ control.
  • Electronic clip, thermal and transducer overdrive protection.
  • Precision Engineered: Rugged finish always looks good, even with heavy use.
Check Stock

Rockville RPG2X10 Bluetooth PA System Mixer/Amp+10\ Speakers+Stands+Mics+Bags

  • 4 balanced XLR microphone inputs. Tape/CD Line inputs. 10 total inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control. Line Out for connection to external amplifiers. Return input for connection of external effects processors. Record Out for taping. RF interference protection on all inputs. Aux Send Output: -10 dBv nominal, 1k ohms..
  • Tape Rec Output: -10 dBv nominal, 1k ohms. Input lmpedance: Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms. Input Channel Equalization: +/- 15 dB @ 5 kHz. 3 Band equalizer: Bass: +/- 15 @ 60 Hz Mid: +/-15 @ 1 kHz Treble: +/- 15 @ 10 kHz. Protection Circuit: Power on Mute delay time: 2 seconds. Microphones: Rockville RMM-XLR Dynamic Microphone. Professional 10 FT XLR Cables Included. Steel Mesh Grill. On/Off Switch. Rugged Metal Construction. Natural Sound Reproduction..
  • Beautiful Black Finish (The perfect combination of matte and shiny black finish). Frequency Response: 50Hz-15kHz. Super Cardiod Polar Pattern. Impedance 600 Ohm ±5%. Sensitivity -60dB ± 3dB (0dB=1V/Pa at 1KHz).
  • Rockville TB12 Padded Rugged Speaker Bag Carry Case For 12" DJ PA Speake....
Check Stock

Alto Professional TS310 | 2000 Watt 10 Inch 2 Way Powered PA Speaker with Integrated 2-Channel Mixer and Pole or Wedge Positioning Options

  • Superior PA Sound – 2000W (1300 LF plus 700 HF) active PA speaker with precision crossover and high-efficiency class D amplifiers.
  • Driving Bass, Pristine Highs - 10-inch (305 mm) LF driver, 2.5-inch (76 mm) high-temperature voice coil.
  • 1.4-inch (35 mm) neodymium magnet HF driver....
  • Setup Simplified - Lightweight, PA cabinet design for easy transport, set up and installation.
  • pole-mountable, wedge monitor, bracket installation or....
  • Ready for Any Situation - Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output,....
  • Precision Engineered - Designed and tuned in the USA.
Check Stock

WAVLINK AC600 Outdoor WiFi Range Extender,Dual Band 2.4G & 5GHz High Power Weatherproof Wireless Signal Amplifier Booster,Support AP/Router/Repeater/WISP Modes/Bridge Mode for Outdoor Wi-Fi Coverage

  • ...er and network data connection into a single RJ-45 cable.Support Repeater, AP,Router and WISP as operating modes. In AP mode, it provides Access Point, Client, Client Repeater modes for wireless solutions,you can use for different modes as you wish, Support 3 LEDs wireless signal strength..
  • ✅【Built-in High Power Amplifiers】- High Power Amplifiers PA+LNA 600mW and enhanced receiver design increase transmission power up to 5x . More strong penetration & longer range coverage than the general access point, ideal for providing Wi-Fi service in big area such as factory, community, street or etc.Feature 2 x RP-SMA connectors for external antennas, and higher antenna gain extensively strengthens Wi-Fi signal and expands wider coverage in the open air..
  • ✅【We Promise】-The package includes: 1 x Wi-Fi AP/Range Extender/Router, 2 x Detachable Omni Antenna, 1 x RJ-45 Networking Cable, 1 x Power Adapter, 1 x POE Converter, 1 x Main body holder, 2 x Cable ties, 1 x Screw fittings, 1 x Quick Guide and We strictly check the quality problems before shipment and upgrade the system, we provide 18 months free return and lifetime consultation on any problems,we promise will solve the problem for you,thank you..
Check Stock

WAVLINK WiFi Router Extender,AC600 Home Router Outdoor WiFi Access Point High Power Dual Band 2.4+5G 600Mbps Wireless Router/AP/Wi-Fi Range Extender 3 in 1 Weatherproof with PoE, Upgrade Version

  • ...power and network data connection into a single RJ-45 cable.Support Repeater, AP,Router and WISP as operating modes. In AP mode, it provides Access Point, Client, Client Repeater modes for wireless solutions,you can use for different modes as you wish, Support 3 LEDs wireless signal strength..
  • 【Built-in High Power Amplifiers】- High Power Amplifiers PA+LNA 600mW and enhanced receiver design increase transmission power up to 5x . More strong penetration & longer range coverage than the general access point, ideal for providing Wi-Fi service in big area such as factory, community, street or etc.Feature 2 x RP-SMA connectors for external antennas, and higher antenna gain extensively strengthens Wi-Fi signal and expands wider coverage in the open air..
  • 【We Promise】-The package includes: 1 x Wi-Fi AP/Range Extender/Router, 2 x Detachable Omni Antenna, 1 x RJ-45 Networking Cable, 1 x Power Adapter, 1 x POE Converter, 1 x Main body holder, 2 x Cable ties, 1 x Screw fittings, 1 x Quick Guide and We strictly check the quality problems before shipment and upgrade the system, we provide 18 months free return and lifetime consultation on any problems,we promise will solve the problem for you.
Check Stock