Categories

Best Paint For Concrete Walls In Basement

Basement Window 4-Step Galvanized Steel Emergency Escape Ladder with 300 lb. Weight Capacity

  • Professional grade 4-step egress escape ladder for use in basement window wells 54 in. to 66 in. in depth.
  • Constructed of galvanized steel tubing. No tools required for assembly. Assembles and installs in minutes.
  • Anti-slip rung tape included Graspable handrails for quick and easy escape.. Installs quickly and securely to typical corrugated steel basement window wells using only 2 self-tapping screws.
  • Typical for corrugated metal wells but will mount inside all types of basement window wells (metal, concrete, plastic, block, timber etc.) with the use of alternative mounting hardware (not included).
  • Mounts to concrete foundation walls to aid in climbing into basement windows with over a 44 in. sill height as required by IFC and IBC code (must use alternative wedge anchor mounting hardware). Meets or exceed IFC and IBC building codes. 300 lb. weight capacity.
Check Stock

Timtin 700 G/ 1.54 Lb Blend Decorative Color Chips Concrete Floor Coatings Paint Flakes for Garage Floor Paint Interior Exterior Walls Floors (Black, White, Gray)

  • Sufficient colored flakes kit: you will receive a pack of flooring decorative chips of 700 g/ 1.54 lb, including several different simple colors, which can meet your various decorative needs.
  • Reliable material: the paint chips are made of natural rock slices, small and lightweight.
  • Each piece of the floor flakes is about 2-4 mm/ 0.08-0.16 inch, providing you with different sizes to match.
  • Delicate surface decorations: the blend flakes for epoxy floor can help to cover the marks and dirt on the walls and floors, and make your walls and floors more stylish and beautiful, quickly enhancing the appearance of the surface.
  • Easy to use: you can sprinkle a layer of concrete floor coatings on the ground, and then apply a layer of paint to complete the construction, to achieve a permanent adhesion.
  • Wide applications: the floor color chips are suitable for indoor and outdoor painting on floors and walls, which can be applied for garage, laundry room floors, basement, store floors, showrooms, restaurants and so on.
Check Stock

Thoro T1180 Gry Seal Foundation Coating, 50 lb

  • Waterproofs exterior below grade concrete or masonry.
  • Apply with a push broom or a 6” masonry Brush.
  • Cleans up with soap and water immediately after use. Recommended for: Concrete, masonry, basement walls, foundation and retaining walls. Coverage: Base Coat: 225 square feet at 1/16 IN dry-film thickness.
  • Top Coat: 450 square feet at 1/32 IN dry-film thickness. Coverage will vary depending on surface texture and porosity.
Check Stock

TimTin 700 G/ 1.54 Lb Blend Decorative Color Chips Concrete Floor Coatings Paint Flakes for Garage Floor Paint Interior Exterior Walls Floors (Black, White, Blue, Gray)

  • Sufficient colored flakes kit: you will receive a pack of flooring decorative chips of 700 g/ 1.54 lb, including the colors of white, blue, gray and blue, which can meet your various decorative needs.
  • Reliable material: the paint chips are made of natural rock slices, small and lightweight.
  • Each piece of the floor flakes is about 2-4 mm/ 0.08-0.16 inch, providing you with different sizes to match.
  • Delicate surface decorations: the blue blend flakes for epoxy floor can help to cover the marks and dirt on the walls and floors, and make your walls and floors more stylish and beautiful, quickly enhancing the appearance of the surface.
  • Easy to use: You can sprinkle a layer of concrete floor coatings on the ground, and then apply a layer of paint to complete the construction, to achieve a permanent adhesion.
  • Wide applications: the floor color chips are suitable for indoor and outdoor painting on floors and walls, which can be applied for garage, laundry room floors, basement, store floors, showrooms, restaurants and so on.
Check Stock

TimTin 1400 G/ 3.08 Lb Blend Color Chips Concrete Floor Coatings Decorative Paint Flakes for Walls Garage Floor Paint Interior Exterior Floors (Black, White, Gray)

  • Vibrant Colored Flakes Kit: you will receive a pack of flooring decorative chips of 1400 g/ 3.08 lb, including several different simple colors, the enough quantity can meet your various decorative needs.
  • Reliable and Lightweight: the paint chips are made of natural rock slices, small and lightweight.
  • Reliable and sturdy, each piece of the floor flakes is about 2-4 mm/ 0.08-0.16 inch, providing you with different sizes to match, can serve you for a long time.
  • Decorative Surface Decor: the blend flakes for epoxy floor can help to cover the marks and dirt on the walls and floors, and make your walls and floors more charming and beautiful, achieving the nice decorative effect.
  • Convenient to Use: you can sprinkle a layer of concrete floor coatings on the ground, and then apply a layer of paint to complete the construction, to achieve a permanent adhesion, easy for you to use.
  • Widely Applicable: the floor color chips are suitable for indoor and outdoor painting on floors and walls, which can be applied for garage, laundry room floors, basement, store floors, showrooms, restaurants and so on.
Check Stock

Drilax Diamond 3 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick Cinder Block 3/8 inch Standard Shank Rotary Tools

  • Industrial heavy duty, commercial quality, durable 3 inch core drill bits for concrete, exactly 3 inches diameter.
  • Concrete hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 3 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop,....
  • 3 inch concrete core saw hammer drill bits for concrete.
  • Laser welded concrete hammer core bit fits your standard drill..
Check Stock

Diamond 4 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block Standard Shank Drilling Holesaw Tool

  • Durable 4 core drill bits for concrete, exactly 4 inches diameter. Tool Life: 7 to 10 holes in concrete. Not for Hammer or Impact drilling..
  • Concrete hole saw 4 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill. Not for hammer action.
  • 4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • Sintered diamond 4 in concrete core saw bits for concrete..
  • Diamond is sintered, not visible. Laser welded diamond concrete hammer core bit fits your standard drill. If abused, this hole saw will no last more than a few uses..
Check Stock

1 inch Diamond Drill Bit Concrete Diamond Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block 3/8 inch Standard Shank Rotary Tools

  • Industrial heavy duty, commercial quality, durable 1 inch core drill bits for concrete, exactly 1 inches diameter.
  • Concrete hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 1 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain, stucco, slab, slate.
  • 1 inch concrete core saw hammer drill bits for concrete.
  • Laser welded concrete hammer core bit fits your standard drill..
Check Stock

Concrete Stone Texture Roller Kit - Wall Stone & Cobble Stone- For Advanced Concrete Use

  • Concrete Forming Stone Texture Roller Kit - Wall Stone & Cobble Stone - Fits Standard Size Paint Roller Handle (Not Included) For GREAT Results, EXPERIENCE OR KNOWLEDGE of Working With Concrete Mixes IS Necessary! Both Work Great If Used Properly!.
  • VOTED MOST POPULAR SINCE 2005! BOTH The Wall Stone Roller & The Cobble Stone Roller are Great for any Weeping Water Walls. Interior and exterior walls, sidewalks or flooring, coffee tables, and countertops. Also, classy under countertops and barbecue walls, or as a surrounding texture upon hanging art panels..
  • THE WALL STONE TEXTURE ROLLER APPROX. 10” LENGTH X 2, ¾” DIAMETER & THE COBBLE STONE ROLLER 9” LENGTH X 2, 3/8” DIAMETER.
  • Fits Standard Size Paint Roller Handle (Not Included) For GREAT Results, EXPERIENCE OR KNOWLEDGE of Working With Concrete Mixes IS Necessary!.
  • ALL OF SBC PRODUCTS (MOLDS, FORMS, TEXTURE ROLLERS, TEXTURE STAMPS, ETC.) Are Uniquely Created & Designed by the Founder of SBC “Bryan Gauthier, NONE of SBC Products are copies of any other designs you see on the market! SBC Concrete Countertop Forms, Stamps, Rollers, Sink Molds, Offer THE MOST "Pristine" Textures you will find!.
Check Stock

1 1/4 Diamond Hole Saw Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block 3/8 inch Standard Shank Rotary Tools 1-1/4 inch Diamond Drill Bit

  • Industrial heavy duty, commercial quality, durable core drill bits for concrete, exactly 1-1/4 inches diameter.
  • Concrete hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 1-1/4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain, stucco, slab, slate.
  • 1-1/4 inch concrete core saw hammer drill bits for concrete.
  • Concrete hammer core bit fits your standard drill..
Check Stock

Freeman PSSCP Pneumatic 3" Single Pin Concrete Nailer with Case

  • Construction Applications: Fasten wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs fast and easy. Designed for heavy duty jobs such as basement renovations, garage updates, framing, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, and subfloors..
  • Compatible Nails: Single concrete pins from 3/4" – 3" and 0.145" diameter, including Ramset and Hilti.
  • Built to Last: One piece hardened steel drive blade results in a durable pneumatic tool resistant to damage.
  • 10 Times Faster than Powder-Actuated Systems: Works with conventional air compressors, hoses and fittings. No powder or certifications required, and no need to pre-drill holes..
  • Ergonomic Body: Rugged but also lightweight and comfortable for extended use.
Check Stock

2 inch Diamond Hole Saw for Concrete Masonry Cinder Blocks Stucco Granite Quartz Marble Core Drill Bit Heavy Duty Dry or Wet Drilling Standard Shank Extra Deep Depth of Cut

  • Commercial quality, durable 2 inch core drill bits for concrete, exactly 2 inches diameter.
  • 2 inch Diamond hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 2 in concrete hole saw dry or wet use drilling holes in stucco, concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • 2 inch concrete core saw diamond drill bits for concrete.
  • Concrete core bit fits your standard drill with no adapter needed.
Check Stock

40′ Contractor Polyurethane Foundation Crack Repair Kit-Seal and Stop Water Leaks Through Concrete Wall Cracks for use on Concrete Basement Cracks

  • Stop Leaks in up to 40' of Concrete Basement Wall Cracks.
  • Fast Curing Poxy Paste Surface Sealer and Port Adhesive Bonds tightly to Concrete.
  • Works on Brick Patterned Concrete Walls Also.
  • Hydra Stop 300 Hydrophobic Polyurethane Foam Fills the Crack.
Check Stock