Categories

Best Panel End

Baseboarders Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover + L & R End Caps)

  • Baseboarders Premium Series Set includes one cover panel with a left and right closed end cap to cover any standard sized baseboard heater. If necessary, panels can easily be cut to fit your heater length.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Ba....
Check Stock

Kohree 10 AWG Solar Panel Cable Wire 20 Ft Extension Cable, with Extra Free Pair of Connectors Weatherproof Female and Male Connector Adapter Kit (20FT Red + 20FT Black)

  • 【Pure Copper】Kohree 12 AWG Solar Panel Cable Wire is made of pure copper with tin coating, which provides good conductivity and the ability to resist oxidation..
  • 【Low Power Loss & Highly Efficient】The 10 AWG wire with the largest diameter of the three typically sold sizes (10/12/16 AWG) can minimize the power loss in your solar panel system..
  • 【Solar Cable Connector Kit】Both 4pcs solar panel wires with only one solar connector at one end for solar panel, and bare on the other end for the solar charge controller with the red one (female) and black one (male)..
  • 【Stable Lock & Open Design】Extends and locks were built in solar cables, and with hard plastic connectors offered extremely at each end, so a stable self-locking system is easy to lock and open..
  • 【Weatherproof】The IP67 waterproof solar cable wires are designed to withstand extreme heat and cold (-40℉ ~ +194℉) and 6 mm² is thick enough to push current and voltage (DC: 1.8KV.
  • AC: 0.6~1KV), durable with more than 31-year lifespan for outdoor use..
Check Stock

Baseboarders 2' Length Premium Baseboard Heater Cover Panel Only

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric b....
Check Stock

Mayne Yorkshire 4' Window Box Planter 4824

  • Ready-to-assemble kit requires minor assembly, parts glue together easily to create a beautiful finished product (about 15 min to assemble.
  • Kit includes front panel, back panel, bottom panel, left end cap, right end cap, vinyl glue, 3 wall mount brackets with black powder coated finish and screws.)..
  • Panels can be cut to the exact length needed to create a custom fit for your windows..
  • This window box features a double wall design creating a water reservoir..
  • Outside Dimensions: 48"L x 12"W x 10"H. Inside Dimensions: 42"L x 8"W x 8.25"D, holds approx. 12 gallons of soil, water capacity is approximately 1 gallon (3.8 litres)..
  • The weather-proof and ultra-tough construction allows you to enjoy your window box all year long with very little winter preparation. The UV inhibitors within the vinyl allows for a long lasting fade-free performance..
  • 15 Year Warranty – Residential Application, 5 Year Warranty – Commercial Application..
Check Stock

BougeRV 20 Feet 10AWG Solar Extension Cable with Female and Male Connector with Extra Free Pair of Connectors Solar Panel Adaptor Kit Tool (20FT Red + 20FT Black)

  • UPGRADE 2.0 SOLAR CABLE: Increase a free pair of separate solar connectors. One pair ( 1 piece black + 1 piece red ) 20 Feet 10AWG Solar Extension Cable. Made with copper..
  • Two cables with connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller..
  • The wiring is weatherproof and designed to withstand extreme heat and cold..
  • Solar panel cable is typically sold in 14, 12 and 10 AWG sizes. The solar panel cable offered in this listing is 10 AWG which is the largest diameter of the three. Using large diameter cable minimizes power loss in your solar panel system..
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Coupler)

  • Baseboarders Premium Series Open End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that continue straight through an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only..
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric ....
Check Stock

ShelterLogic Replacement Cover Kit Only No Frame -10x20x8 90588 803358 802180 802179 for 70658

  • ShelterLogic Replacement Cover Kit 10x20x8 90588 803358 802180 802179 for 70658.
  • Cover kit includes main cover (803358) , double zipper end panel w/vent (802180) , solid end panel w/vent (802179).
  • Replacement cover kit only - Frame is not included. Replacement Cover Kits are made by ShelterLogic and intended for specific frames for ShelterLogic....
  • Item ships only to continental U.S., we can not ship to Alaska and Hawaii, U.S. protectorates or international destinations.
Check Stock

Premium Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (6 ft, Cover, No Accessory)

  • Panel only. End caps and other accessories sold separately..
  • Use only Baseboarders brand accessories..
  • Slips over the original baseboard heater – just remove the existing front panel and end caps..
  • Galvanized steel with a powder coated semi-gloss white finish..
  • DIY installation, no tools, no hired help..
Check Stock

BougeRV 200W 9BB Solar Panels Kit with Solar Connectors Y Branch Parallel Adapter Cable and 20FT 10AWG solar cable

  • [ ✔180 Watts Solar Panel ] With high conversion efficiency modules, 180 watts monocrystalline solar panel can charge 12V battery or charge 24/48V battery by wiring several solar panels in series..
  • UPGRADE 2.0 SOLAR CABLE: Increase a free pair of separate solar connectors. One pair ( 1 piece black + 1 piece red ) 20 Feet 10AWG Solar Extension Cable. Made with copper. Extends and locks built-in cables. Two cables with connecters at one end connecting to solar panel and bare on the other end connecting to solar charge controller. The wiring is weatherproof and designed to withstand extreme heat and cold. Solar panel cable is typically sold in 14, 12 and 10 AWG sizes..
  • Y Branch parallel Connector (1 male to 2 female and 1 female to 2 male) Main Technical Specification: -Rated Current:20A -Rated Voltage: DC1000V The waterproof ring on connection is perfect to seal out water and dust to prevent corrosion. Suitable Single Core Cable Section: 14-10AWG (1.5mm² -- 6mm²).
  • [ ✔ User Friendly ] IP65 Rated Waterproof Junction Box can isolate environmental particles and low-pressure water jets. Diodes are pre-installed in junction box, with a pair of pre-attached 3ft Cable. Pre-drilled holes on the back of the panel allow you to quickly install solar panels witho....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Closed End Cap - Right)

  • Baseboarders Premium Series Closed End Caps are available in both left and right (sold separately) sides. They are designed for heaters with pipes that bend down into the floor or back into the wall. They do not continue into an adjacent wall. Designed to snap onto the ends of Baseboarders Premium Series panels only.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard hea....
Check Stock

Osprey Zealot 45 Climbing Backpack, Rocky Brook Green, Medium/Large

  • Top load, cinch closure and access to the duffel-like front panel main compartment with zip mesh pocket organization.
  • Front panel upper attachment loops for belay gloves, GPS/tracker units, water bottle attachment or other small things on the approach or at the crag.
  • Internal side panel zip pocket, additional side panel zip pocket with key fob, and front panel zip pocket for guide book, maps, etc..
  • Durable, protective, compressible foam sidewalls with compression straps.
  • Included rope tarp with rope end tie off loops doubles as a “crag deck” to organize gear, dust off your feet as you change your shoes, leave your hat and sunglasses while on route, make a sandwich, etc..
Check Stock

NeatHeat Inside Corner 135 Baseboard Heater Cover

  • Baseboarders Basic Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you..
  • Baseboarders Basic Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will bec....
Check Stock

Baseboarders Premium Galvanized Steel Inside 90 Degree Corner Connector - White (Any Size)

  • Baseboarders Premium Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will ....
Check Stock