Categories

Best Paper Processing Machine

Teethcon Paper Shredder for Home Office Use, 12-Sheet High-Security, 5.8 Gallons Cross-Cut Paper/ CD/ Credit Card with Large Wastebasket Transparent Window,Overload and Overheating Protection

  • 【12-Sheet High Safety Micro-Cutting Technology】A new generation of nitrided steel cutting tools, durable and sophisticated processing technology. This professional paper machine can cut into small pieces of only 5x38 mm, security level P-4. The shredder can cut up to 12 sheets of A4 paper horizontally at a time to ensure the safe destruction of the destroyed Documents. It can also cut staples/credit/debit cards into small pieces.
  • 【Efficient Work, Twice The Result with Half the Effort】 Continuous paper tearing at full load for 20 minutes, high speed 3m/min tearing paper, efficient shredding according to various indicators of the base.
  • personal, small and medium-sized home office paper shredders, eliminating the cumbersome problems of large machines.
  • 【Easy to Use】Simple control panel, no complicated operations, three buttons, open/close/reverse, two card slots, one ordinary paper card slot, one for DVD/CD/bank cards, etc. Transparent window design, intuitive experience, easy to clean in time. Note: The cover must be placed correctly, there will be sound when placed in the correct direction, otherwise it will not work.
  • 【Strong Protection, Paper Jam Protection System】The main body is covered with a multi-dimensional sensor with intelligent t....
Check Stock

Paper Shredder for Home Office Use, 12-Sheet High-Security, 5.8 Gallons Shredder Cross-Cut Paper/ CD/ Credit Card Shredder with Large Wastebasket Transparent Window,Overload and Overheating Protection

  • 【12-Sheet High Safety Micro-Cutting Technology】A new generation of nitrided steel cutting tools, durable and sophisticated processing technology. This professional paper machine can cut into small pieces of only 5x38 mm, security level P-4. The shredder can cut up to 12 sheets of A4 paper horizontally at a time to ensure the safe destruction of the destroyed Documents. It can also cut staples/credit/debit cards into small pieces.
  • 【Efficient Work, Twice The Result with Half the Effort】 Continuous paper tearing at full load for 20 minutes, high speed 3m/min tearing paper, efficient shredding according to various indicators of the base.
  • personal, small and medium-sized home office paper shredders, eliminating the cumbersome problems of large machines.
  • 【Easy to Use】Simple control panel, no complicated operations, three buttons, open/close/reverse, two card slots, one ordinary paper card slot, one for DVD/CD/bank cards, etc. Transparent window design, intuitive experience, easy to clean in time. Note: The cover must be placed correctly, there will be sound when placed in the correct direction, otherwise it will not work.
  • 【Strong Protection, Paper Jam Protection System】The main body is covered with a multi-dimensional sensor with intelligent t....
Check Stock

Schwer Highest Level Cut Resistant Stainless Steel Metal Mesh Chainmail Glove for Meat Cutting Butcher Glove（XXL）

  • 【Adjustable Wrist Clasp】- The stainless steel mesh clasp is convenient, and you can adjust it for the right fit. Compared with mesh gloves with fabric cuffs, a stainless steel mesh clasp is easier to clean. Clean: Metal mesh gloves should be cleaned daily, particularly in food processing operations. A water temperature of 122° F (50° C) is recommended whether gloves are manually or machine washed..
  • 【Multi Purpose】- Schwer mesh gloves are the premier choice for food processing, restaurant, and food service applications such as meat, fish, and poultry processing, slicing, deboning, shucking, mandoline and slicing. In addition, they are also perfect for industrial product processing such as plastic, leather, wood, glass, paper, and clothes processing..
Check Stock

TOPDesign 1 | 3 | 6 | 12 | 24 Pack Super Strong Large 12oz Cotton Canvas Tote Bag, Reusable Grocery Shopping Cloth Bags, Fashionable Two-Tone Bags for Crafts, DIY Your Creative Designs (Pack of 1)

  • ...itching throughout, including cross-stitching at the handles for maximum strength allowing the bag to hold up extra bearing capacity. With two reinforced handles sized 1.4″W x 22.8″L, convenient to carry in hand or wear on your shoulder, sturdy enough for all kinds of daily use..
  • MULTI-FUNCTION: unique bleaching processing, fast water absorption, great for painting and decorating projects at home, at school, or in camp, add your own touch with paint and other craft tools for a personalized gift bags to your loved ones. Buy some Heat Transfer Vinyl paper to iron-on transfer it on the bag, also can do embroidery. Fit for beach, picnic, party, gym, library, birthday gifts, trade shows, conference, Christmas gifts, wedding and various events’ carry..
  • ECO-FRIENDLY: responsible for saving the planet by not choosing paper or plastic bags, go green, bring our life in a colorful and creative way..
  • MACHINE WASHABLE: the fabrics are done the bleaching and dyeing processing, the shrinkage is controlled quite well, around 5%. No worries about the dirt marks or muds, just throw it into the washing machine to get it clean..
  • WARRANTY: the bag fabric is weaved by high-class quality cotton yarn, the fabric surface is neat and no impurities. If the bag is broken in a....
Check Stock

Under Siege

  • ...m wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
  • SAFELY & ENVIRONMENT-FRIENDLY: Class I(FDA Certificated) safety rating. The viewing cover can filter blue light to protect your eyes. A built-in fan with exhaust pipe quickly blows away and discharges smoke, dust, and spark.
Check Stock

Platy for Prezi!

  • ...m wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
  • SAFELY & ENVIRONMENT-FRIENDLY: Class I(FDA Certificated) safety rating. The viewing cover can filter blue light to protect your eyes. A built-in fan with exhaust pipe quickly blows away and discharges smoke, dust, and spark.
Check Stock

LEJIEYIN Electric herb Grinder 550g High Speed Electric Stainless Steel Spice Grinder Electric Flour Mill Herb Grinder Powder Machine for Dry Food Grin

  • ...ormally.Recommend use time is no more than 3 minutes. Do not continuously operate the machine, and it takes 5-10 minutes to rest after every 3 minutes of grinding work..
  • ✅SCOPE OF USE :Grain and corn grinder is widely used in families，kitchens,restaurants,clinic,hospital,pharmacy, institute laboratories,medicine processing factory,food store and powder processing,valet processing of health care products crushing sales counters,instead of traditional grinders.If there is anything we can help with,warmly welcome to contact us..
  • ✅CLEANING AND STORAGE：1. After each grinding, use a moist paper towel or cloth to clean up the food powder, not directly rinse with water,which will damage the motor；2. After cleaning, please put it in a ventilated place, so that the inner compartment to keep dry, do not put in the sun,check the dry and then cover the lid and store.
  • ❗ ❗ ❗ USE TIPS: 1. This electric grinder mill can only be turned on after the lid is fully buckled.2. The materials ready for grinding must be dry enough. 3. Rest the machine for 5-10 minutes after every 3 minutes operation. 4. Do not put the material over 2/3 of grinding bin. 5.Don't clean the grinding tank with the water directly. Keep water away the grinding tank and use dried rag or ....
Check Stock

Grain Mill Grinder 750g High Speed Electric Stainless Steel Grinder Cereals Corn Flour Pulverizer Powder Machine for Dry Spice Herbs Grains Coffee Rice Pepper(750g Stand Type)

  • ...e it normally.Recommend use time is no more than 3 minutes. Do not continuously operate the machine, and it takes 5-10 minutes to rest after every 3 minutes of grinding work..
  • ✅SCOPE OF USE :Grinding mill It is widely used in families，kitchens,restaurants,clinic,hospital,pharmacy, institute laboratories,medicine processing factory,food store and powder processing,valet processing of health care products crushing sales counters,instead of traditional grinders.If there is anything we can help with,warmly welcome to contact us..
  • ✅CLEANING AND STORAGE：1. After each grinding, use a moist paper towel or cloth to clean up the food powder, not directly rinse with water,which will damage the motor；2. After cleaning, please put it in a ventilated place, so that the inner compartment to keep dry, do not put in the sun,check the dry and then cover the lid and store.
  • ❗ ❗ ❗ USE TIPS: 1. This grain grinder can only be turned on after the lid is fully buckled.2. The materials ready for grinding must be dry enough. 3. Rest the machine for 5-10 minutes after every 3 minutes operation. 4. Do not put the material over 2/3 of grinding bin. 5.Don't clean the grinding tank with the water directly. Keep water away the grinding tank and use dried rag or brush to....
Check Stock

Wood Router,Router Tool Wood Trimmer Router Electric Hand Trimmer Laminate Milling Engraving Hand Machine Joiner Tool Electric for Slotting Trimming Carving 110V 800W 30000R/MIN

  • ...tion of the machine. Anti-vibration, practical, simple operation, durable..
  • 【High-precision and easy operation】-The transparent base allows you to clearly see the trimming and easy operation. The transparent base design has high precision and is easy to identify during processing. Adjustable knob, scale can be adjusted..
  • 【Stable and non-deformation】- It includes some accessories, such as wrenches, trimming guides, straight guides, etc. The trimming guide rail and the rollers run along the curve to ensure accurate cutting and fine curve processing. Linear guide rail, thicker model is stable, no deformation, linear processing stable wooden wrench can tighten router head..
  • 【Wide use】-This electric trimming machine is widely used in wood processing, cabinet processing, handicraft production, plastic board, wood veneer and other similar materials chamfering, grooving, surface treatment, curve cutting, wood edge planning, pattern processing Homework activities and DIY. Easy wood trimming and slotting..
Check Stock

xTool M1 10w Compact 3-in-1 Laser Engraver & Cutting Machine with Rotary & Material Box, Higher Accuracy & Smarter 16MP Auto-Focus, Create Christmas DIY Wood/Metal/Paper/Acrylic/Iron-on/Vinyl

  • ... True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
  • SAFELY & ENVIRONMENT-FRIENDLY: Class I(FDA Certificated) safety rating. The viewing cover can filter blue light to protect your eyes. A built-in fan with exhaust pipe quickly blows away and discharges smoke, dust, and spark.
  • THE ULTIMATE GIFT-MAKING MACHINE: It can engrave glass, tumblers and other cylindrical objects when using rotary attachment. Removable bottom plate also supports engraving unlimited height of materials. It is a perfect gift-making machine for birthday/holiday/wedding/family/pets/decoration or small business..
  • WHAT'S IN THE BOX: xTool M1 Machine 10W*1, Rotary Attachment*1, Deluxe Material package *1, Basic Material package *1, Light-grip Cutting Mat(Blue)*1, Strong-grip Cutting Mat(Pink)*1, 45° Replacement Blade*5, Exhaust Pipe kit *1.
Check Stock

Country Living Hand Grain Mill

  • -Interval : 10minutes -Working time : 5 minutes.
  • Material: Good quality stainless steel material makes the machine durable, which could provide you a long service life.
  • High power and high grinding speed, let the machine more efficient than the traditional motor models.
  • The grinder is suitable for dispensary, medicine processing factory and powder processing.
  • The machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper, medicine (such as ganoderma, licorice, tianqi, pearl etc).
Check Stock

Mini Metal Lathe Machine CNC DIY Tool Benchtop Wood Lathe Woodworking for Hobby Sience Education Modelmaking, AC110V 50/60HZ (Ship from USA)

  • ...gence of children. So as to be a good didactical tool for children. It is also an ideal tool for DIY hobbyist and modelmaker to make various craft. .
  • This is a Micro desktop lathe which can used for turning, drilling, boring, threading and other processing Made of advanced aluminum alloy, durable and non-deformable for usage. Note: When processing harder materials, the feed rate should be smaller, and the operation of aluminum and copper materials should be slow. Patience is required.which is slower than processing wood..
  • Processing Materials: Wood, Plastic, Aluminum, Copper and other Soft Metal,CAN'T Processing Alloy,Brass Rod.Note: The harder the material, the smaller the depth of cut.we offer several shims for you to adjust the height of the turning tool..
  • Note: The machine defaults to use high speed motor. If you need a low speed motor, please contact us.This machine is a micro lathe and cannot achieve high precision. Please check the size of the accessories.Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw. If you have requirements for high precision, please consider purchasing....
Check Stock

2 Axis Metal Case LCD DRO Digital Readout Display for Mill Milling/Lathe Machine (2 Axis DRO)

  • ...RO value will be saved. 2 :Determine the workpiece centre: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece centre.
  • 3 :200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator Round arc processing: Sample round processing and two axis arc processing.
  • 4:Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece..
Check Stock