5 Genuine Intrepid flawless flow Medium Refills for Papermate Lubriglide Aspire PhD Pens Bulk Packed BLUE

  • Intrepid company 1 year warranty. Flawless and frictionless flow. guaranteed.
  • Specially formulated intrepid ink flows flawlessly for a superior writing experience.
  • 5 black refills for Papermate Lubriglide, Aspire, PhD Pens,.
  • Intrepid Insignia AND TRADEMARK AS A REMINDER OF THEIR UNPARALLELED QUALITY POLICY.
Check Stock

TATTU 500mAh 1S Lipo Battery Pack 3.7V 95C with JST-PHR Plug for Emax Tiny Hawk/Happymodel Snapper7

  • 【Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Specification】:Battery Voltage:3.7V, Configuration:1S, Capacity:500mAh, Discharge: 95C, Plug: JST-PHR.
  • 【High-Performance Battery】: A Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack with full capacity. Long Cycle Life Offers high power and a very long time for your Multirotor FPV from size 100 to 180..
  • 【Dimensions】: Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack dimensions: 58*18*8mm/2.28*0.71*0.31inch.
  • 【Application】: Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack is suitable for Tiny Hawk (PH2), EMAX Tinyhawk freestyle (PH2), EMAX Tinyhawk S (PH2), Happymodel Snapper7. Multirotor FPV from size 100 to 180..
  • 【What you get】: A Tattu 1S Lipo Battery 500mAh 3.7V 95C 1S1P Lipo Battery Pack With JST-PHR Plug. Please enter "YOUR ORDER" to contact us directly if you have any problems with our product, we will reply you within 24 hours..
Check Stock

BIC Round Stic Xtra Life Ballpoint Pen, Medium Point (1.0mm), Blue, Flexible Round Barrel For Writing Comfort, 144-Count

  • Long-lasting ink with 1.0 mm medium point for all types of writing.
  • Writes 90% longer on average than PaperMate InkJoy 100 Stick Ball pen (PaperMate and InkJoy are trademarks of Newell or an affiliate. Newell has not sponsored or approved and is not affiliated with this BIC branded product).
  • Paperboard packaging is made up of 100% recycled material.
  • A smooth-flow ink system and semi-clear barrel available in black, blue and red.
Check Stock

OVONIC X1 Dual RC Lipo Battery Balance Charger for 1s 2s 3s 4s 5s 6s Lipo Batteries, Life/NiCd/NiMH/LiHV Batteries - AC 200W / DC 300W 15A Smart Fast Charging, with Sync Charging Mode

  • 【Support Sync Charging Mode】DUAL OUTPUT, Normal 500W Max to 700W,fast charge from 0%-80% in few mintues200W 15A Faster Lipo Charger.
  • 15W *2 (Main port 6W *2, Balanced port 9W *2).
  • 【Support Various Batteries】Cell Type:3.7 V to 22.2 V(1s-6s) LiIon/LiPo/LiFe1S-6S, 3.6-18V(1s-16s) NiMH,RC Batteryg Voltage】200W 15A Faster Lipo Charger.
  • 【Multi-functional Charger】Variety of modes: Balance charge, normal charge, fast charge, Storage charge, Discharge, Cycling, and Battery Meter.atteries】Cell Type:3.7 V to 22.2 V(1s-6s) LiIon/LiPo/LiFe1S-6S, 3.6-18V(1s-16s) NiMH, RC Battery.
  • 【Accessories included】AC Input Cable X1 Balance adapter X1 XT60-T plug adapter X1 XT60-EC3 adapter X1 XT60-EC5 adapter X1.
  • Variety of modes: Balance charge, normal charge, fast charge, Storage charge, Discharge, Cycling, and Battery Meter..
  • 【After-sales service-Quality Warranty】2 Years Quality Warranyice】If you have any problems, please feel free to contact us and we will reply you within 24 hours..
Check Stock

Superb Wrench SPBW-11 Heavy Duty Metal Water Filter Wrench (3.69 inch Inside Diameter)

  • Replaces the WX5X140 Ge Filter Housing Wrench. 3.69 inch Inside Diameter.
  • Made of heavy duty 7 gauge steel that will not break, bend or strip the water filter housing unit.
  • Fits: GE FXWPC, GE FXWSC, GE GN1S15CBL, GE GN1S20C, GE GNSV30CWW, GE GNSV25CBL, GE GNSV30CCC, GE GN1S20C, GE GXWH01C, GE GXSV10C, GE GXSV10C, GE GX1S04C, GE GX1S01C, GE GXWH04F, GE GXRV10ABL, GE GXWH08C, GE GXSL03C, GE GXWH20F, GE GXUT03A, GE GXUT03B, GE PNRV12ZWH01, GE PNRV12ZBL01, standard RO Slim Line and Watts WR 100.
  • Handle is rubberized and longer than a standard filter wrench which gives you extra leverage.
Check Stock

Aqara M1S Smart Hub, Wireless Smart Home Bridge for Alarm System (2.4 GHz Wi-Fi Required), Home Automation, Remote Monitor and Control, Supports Alexa, Google Assistant, Apple HomeKit and IFTTT

  • Note: The Aqara Hub M1S requires a secured 2.4 GHz Wi-Fi network connection. One Aqara Hub M1S can connect up to 128 Aqara devices (Aqara Zigbee repeaters required). Thanks to the latest Zigbee 3.0 protocol, the M1S supports all existing and latest Aqara devices based on the fastest, most stable, and energy-efficient technology..
  • Wireless Control Center: The M1S Hub connects all Aqara devices and allows for seamless integration across Aqara’s sensors and home automation devices. It controls the connected lights and other appliances from your smart phone. Schedules, timers, and scenes can be set through the Aqara Home app to help you manage your home more easily. The M1S Hub works with all Aqara devices to create a comprehensive, smart home automation system..
  • Focus on Security: A powerful 2-watt speaker can be used as an alarm or doorbell as well as via configurable automations. Apart from the Aqara Alert System, the M1S supports all 4 HomeKit alarm modes. High-quality components and design are not only a subtle addition to any room interior but also make the M1S more reliable by achieving constant airflow through its large, perforated base..
  • RGB Light and Illumination Sensor: M1S has a built-in RGB light made of 18 powerful LEDs and a diffuser. It ca....
Check Stock

Stainless Steel Heat Plate - Fire Magic

  • Stainless Steel Heat Plate - Fire Magic 13.75" x 10.75" in..
  • Fits Fire Magic 12-S1S1N-A, 12-S2S1N-A, 14-S1S1N-A, 14-S2S1N-A, 22-S1S1N-21, 22-S1S1N-62, 22-S1S1N-87, 22-S2S1N-62, 22-S2S1N-87, 24-S1S1N-62.
  • Fits Fire Magic 24-S2S1N-62, 34-S1S1N-A, 34-S2S1N-A, Custom I, Regal I.
Check Stock

Hiyiton Dual Lipo Battery Balance Charger Discharger 10A DC 240W AC 150W Dual Port LCD Display RC Hobby Battery Charger for Lipo Li-ion Life LiHV NiCd NiMH PB Smart Batteries

  • Dual Port RC Charger- The charger with DC AC dual input port and two channels, can charge two different kinds of batteries simultaneously with different voltages, but please don’t charge two different batteries at the same channel and don’t use the AC power cable and DC cable at the same time.
  • High Charge Current – The dual lipo battery charger could support power distribution, AC input max power 150W(CH1+CH2=150W), 100-240V.
  • DC input max power 240W(CH1+CH2=240W), 11-18V, charge rate up to 10A, your charging time is now faster than ever before..
  • Support Various Batteries – It is compatible with various kinds of RC toy batteries,support like Lipo:3.7V-22.2V(1S-6S),LiFe:3.3V-19.8V(1S-6S),Li-ion:3.6V-21.6V(1S-6S),LiHv:3.8V-22.8V(1S-6S), NiMH: 1.2V-18V(1S-15S), NiCd: (1.2V-18V)1S-15S), PB/SLA: 2-20V.Smart Battery(I,II,III 5-27V, 0.1-6A)..
  • Multi-functional Charger-It not only comes with features like balance charge, fast charge, storage charge, cyclic charge & discharge, 20*2 groups of memorized datas, but also is designed with Battery meter,Lithium battery internal resistance checking, Adjustable digital DC power etc, which makes it super convenient!.
  • Max SAFETY -This lipo battery charger with low input voltage limit, automatic charge current limit, ....
Check Stock

6549W1S011B Microwave Oven Turntable Motor SSM-16HR Carousel Synchronous Motor AC21V 2.5/3 RPM Compatible with GE LG and More

  • Compatible with: GE ST16FE EX73SAAA3 WB26X10143 WB26X10038 and LG 721.63252301 721.63254301 JES35BJ JES738WJ02 MPDJ030BF JE1460BF JE1460BF002....
  • Drive shaft: D type, Shaft Diameter: 7mm/0.28", Shaft Length: 9mm/0.35".
  • Replace for these part number: 6549W1S002B 6549W1S011A 6549W1S011C....
  • This item is made under 2 different label as following: SSM-16HR & GM-16-2F302, Can directly replace for GE, LG and other microwave turntable motor.
  • More product details: Model type is SSM-16HR 6549W1S011B.
  • Well protected by box: Our replacement is packed in high quality box which can protect it very well. quality insurance by the same OEM factory..
Check Stock

SYLVANIA - D1S Basic HID (High Intensity Discharge) Headlight Bulb - High Performance Bright, White, and Durable Lamp (Contains 1 Bulb)

  • Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind. Replace your D1S HID bulbs in pairs for optimum performance..
  • Extremely Long Life: D1S HIDs have a longer life, using 1/3 less energy compared to normal halogen lighting..
  • Superior Visibility: D1S HIDs output 3 times more light than a normal halogen bulb. The bulb is legal for road use..
  • The Sylvania Standard Of Quality: With over 100 years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket..
Check Stock

Lipo Battery Charger, 1S-6S Balanced Charger Discharger, 1-6S Lipo Li-ion NiMH NiCD Li-Fe Battery with Tamiya XT60 Deans Futaba Connector

  • Support Battery Packs - The RC battery charger is ideal for all hobby battery packs, compatible with various kind of RC toy battery, like RC drone, RC car, RC Robot, RC boat and for airsoft , support like LiPo 3.7V-22.2V (1S-6S), Li-ion 3.6V-21.6V (1S-6S), LiFePO4 3.3V-19.8V (1S-6S), NiMH/NiCD 1.2V-18.0V(1S-15S),SLA( 2V-24V)..
  • More connector types- This RC battery balance charger is compatible with almost all popular RC battery connectors, like Tamiya, Deans, XT60, Futaba connectors. Conveniently, you don't need to buy other cables separately..
  • Multiple advanced functions - More than a regular Lipo battery charger, it comes with features like balancing charging, fast charging, memory storage&load, cyclic charging&discharging, warning and error message, processing time limit, and much more information in the program..
  • Package included - 1×V6 battery charger.
  • 1×T-Crocodile Clipe;1× XT60 Plug;1×4mm to Deans Charge Cable;1×Timiya cable.
  • Wide voltages compatibility - Work with voltages ranges from 1.2 volts to 18 volts for nickel-metal hydride or nickel-cadmium battery packs, and Lithium battery packs with voltages from 3.7 volts to 22.2 volts..
  • Higher safety standards- This multi-batt....
Check Stock

CNHL 450mAh 1S lipo Battery HV 3.8V 70C Lipo Battery with PH 2.0 Plug for 1S Racing Drone Quadcopter EMAX TinyHawk HAPPYMODEL Snapper7(4 Packs)

  • 【CNHL 3.7V 450mAh Lipo Specification】- Material: Lithium polymer.
  • Plug: PH2.0.dimension is 7.3*18.1*59.3mm/0.28*0.71*2.33inch.
  • 【High Performance】- CNHL 1S lipo battery with 70C discharge rate hardcase.self-products Grade-A cells push the limits of batteries by utilizing new high power cell technology, CNHL batteries are compact and lightweight, maximizing your power to weight ratio..
  • 【Application】 – CNHL 1s 450mah Lipo battery specially designed for FPV racing drone brushless quadcopter TinyHawk Inductrix FPV Plus Kingkong Tiny 7 Beta75S etc..
  • 【Voltage Note】- Please check whether the battery surface is alright when you get it and whether the voltage is between 3 3.8~4.35V before using..
  • 【What you get】- 4Pack of CNHL 3.7v 70C 450mAh 1S Lipo Battery with PH 2.0,After-sales Service: Every CNHL Product has 30 Days Money Back Guarantee & 12 Months Warranty. Please contact us immediately if you have any problems with our product( enter into “Your Orders” for help or send email to our after-sales mailbox), we will reply you within 24 hours..
Check Stock

Rechargeable Dog Bark Collar with Beep Vibration and Shock,Anti Barking Collar for Small Medium Large Dogs, Humane Dog Training Device with 5 Adjustable Sensitivity Levels

  • Dog Bark Collar for large dogs.No False Triggers: Has a strict false barking detection function, activated only when your dog is barking..
  • 3 Humane Training Modes: Dog bark collar with a beep, vibration, and shock modes, 0-5 adjustable sensitivity levels..
  • Rechargeable bark collar: This is completely rechargeable using the included USB cable, full charge in 1 to 2 Hours works for about 15 days..
  • Dog bark collar light weight for small dogs from 8 to 150 pounds with 2 reflective belts adjustable..
  • The No-bark Collar Workflow: Press the sensitivity button for 3s. No shock mode: set the 'SHOCK' button to level 0, when detects barks, it will beep+vibrate 1s then enter into a new loop mode. Shock mode: Set the 'SHOCK' button to level 1-5, when detects barks 1st time, it will beep for 1s. the 2nd, 3rd time, beep 1s, vibrate 1s, and shock for 0.5s. the 4th-6th time, beep 1s and shock for 0.5s. The 7th time will activate 'SLEEP MODE' for the 30s then enter into a new loop..
Check Stock