Categories

Best Parallel Co rotating Twin Extruder

Artillery Sidewinder X2 3D Printer, SW-X2 FDM 3D Printers Newest Model Auto Leveling, 32-Bit Silent Motherboard 95% Pre-Assembled Resume Printing Function Build Volume 300x300x400mm

  • ...ms of filament clogging and uneven extrusion, and achieves high-precision printing. And the maximum printing speed of 150 mm/s realizes high-efficiency printing..
  • [Dual Z-Axis Synchronization System] Dual Z-axis design, double screw drive, makes sure the X-Axis always move parallel to the lattice glass build platform and improves the printing quality..
  • [Automatic Leveling] The Artillery Sidewinder sw-x2 3d printer adopts an intelligent auto bed leveling design, it can automatically adjust the hot bed before printing. And the hot bed can be heated to 110°C within 2 minutes..
  • [Resume Printing Function] The Sidewinder x2 has the function of detecting the exhaustion of filament or power failure, and continuing to print from the position where printing stopped last time after recovery..
  • [Ultra-Silent Printing] 32-bit silent motherboard and exclusive ultra-quiet stepper driver effectively reduce working noise and achieve low-decibel printing mode. Even when the machine works during night, it will not affect your sleep..
Check Stock

Lezyne CO2 Repair Kit for Road, Gravel, Mountain Bikes, Threaded 16g Cartridges, CO2 Inflator, Flat Kit

  • QUICK REPAIR KIT – An easy to pack poly bag with all your quick repair needs into your jersey pocket or saddle bag.
  • TIRE LEVERS – Twin composite matrix reinforced tire levers with spoke tabs to help you remove and re-install your tires after repair.
  • TUBE PATCHES – Smart kit with 6 patches and stainless steel scuffer to get your tubes back to airtight status.
  • TWIN SPEED DRIVE – Slip fit CO2 inflator head fits over both Presta and Schrader, and includes a neoprene cover to protect your hand from the cold CO2 cannister.
  • CO2 CARTRIDGES - Twin 16g threaded cartridges included to make sure you’re good to roll out as soon as you unbox this.
Check Stock

Lang Tools 279-5420 279 Brake Caliper Press

  • Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers.
  • Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons.
  • Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position.
  • Extended reversing lever allows for easy change from spreading to retracting.
Check Stock

GENMAX Portable Inverter Generator，3300W ultra-quiet gas engine, EPA Compliant, Eco-Mode Feature, Ultra Lightweight for Backup Home Use & Camping (GM3300i)

  • ...osed design dramatically reduces noise levels. 60 dba at a quarter load makes it possible to have conversation 10 Feet away, inverter technology provides clean, stable power for sensitive electronics, tools and appliances, with "Eco Mode" function for energy savings and maximum fuel efficiency..
  • 【Strong panel with Parallel function】 LED indicators alert you when unit is low on oil, overloaded or ready-to-use. USB ports to charge mobile devices. one5V / 1A outlets , one 5V / 2.1A outlets .120v 20A duplex and 120v 30A Covered outlets provide added protection from the environment.Parallel ready to connect two GM3300i inverter generator for twice the power. (parallel kit sold separately)..
  • 【CO Detect Shutdown】 Includes CO Detect shutdown sensor for Prevention of Carbon Monoxide Poisoning..
  • 【GENMAX Support】Includes 1-year warranty with FREE lifetime technical support from experts..
Check Stock

Asura 16 Gram CO2 Threaded Cartridges

  • 16 gram CO2 cartridges filled with pure food grade gas.
  • Revised design, works with most co2 inflators that takes threaded cartridges. Tested compatible with: Asura 2sec CO2 Inflator, PRO BIKE TOOL CO2P-R01, Lezyne Twin Speed Drive, SRAM Mini Twist Inflator, Genuine Innovations Ultraflate.
  • Instantly refill your flat tire when pairing with a CO2 tire inflator.
Check Stock

Honda Power Equipment EU1000I 1000W 120V Portable Home Gas Power Generator with CO-Minder

  • Multipurpose - This popular model can operate a wide variety of small appliances. Take a look at the applications tab for more examples..
  • Co-minder - CO-MINDER continuously monitors carbon monoxide (CO) levels. It automatically shuts down the generator before detected CO levels near the generator become dangerously high..
  • Lightweight And Compact - Weighing only 29 pounds, the EU1000 is incredibly lightweight and portable..
  • Double Your Power With Parallel Capability - Need more power? Add a second EU1000i for additional power. Two identical models can be paralleled with an optional cable or cord for up to 2000 watts of power..
  • Super Quiet - The EU1000i operates at 42 to 50 dB(A), which is less noise than a normal conversation. This makes it ideal for camping, supplemental RV power and any other activity that requires quiet operation..
Check Stock

GENMAX Portable Inverter Generator, 9000W Super Quiet Gas Powered Engine with Parallel Capability, Remote/Electric Start, Digital display,EPA Compliant，CO Alarm Ideal for Home backup power (GM9000iE)

  • The Digital Control Center features an LCD display showing hours run, voltage output, and load level.Start the generator remotely with the remote control key far away, Remote control pairing function allows you to easy pairing when key lost..
  • 【Parallel function】Voltage Transfer switch allows you parallel both 120V or 240V. Just using parallel cord to connect two GM9000iE inverter generators together to double your power to 18,000 peak watts and 15,200 running watts. ( Parallel cord sold separately much cheaper than parallel kit ).
  • 【Powerful Control Panel】The control panel includes a wide selection of outlets for maximum compatibility in your applications including: 4 120V household GFCI outlets, 1 120V 30A twist lock outlet, 1 120V/ 240V 50A outlet. lt also includes a dual 5V 1A/2.1A DC USB posts, voltage switch, low idle switch and one key start button..
  • 【CO DETECT】Automatically turns off the generator when an unsafe level of carbon monoxide is detected..
Check Stock

Creality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer

  • COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
  • UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
  • WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
  • EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
  • OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....
Check Stock

The Exhale Homegrown CO2 - Premixed Ready to Use Bag for Grow Rooms & Tents with Hanger & Twin Canaries Chart

  • ExHale Homegrown CO2 is a more harmonious way of providing your plants with CO2.
  • ExHale Homegrown CO2 is a revolution in indoor CO2 production systems. Maintenance Free! No Heat! No Electricity! Just CO2!!.
  • Place the ExHale cultivator slightly above the height of the plants in your grow space. CO2 being heavier than O2 will precipitate downward towards your plants.
  • Twin Canaries Chart included with every purchase.
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

AIVOLT 8000 Watts Dual Fuel Portable Inverter Generator Super Quiet Gas Propane Powered Electric Start Outdoor Generator for Home Back Up Travel RV Camping, 50 State Approved

  • ...comparable to the sound of a normal conversation. Only 131 pounds ultra lightweight and compact design with the telescopic rod and two 7" never-flat wheels, you can easily take the high-performance generator to where you want.
  • 【Multifunction Control Panel & Parallel Capability】 Comes with 2 120V 20A GFCI outlets, 1 240V 30A twist lock outlet, 1 120V 50A industrial outlet and 1 12V DC cigarette outlet with a dual USB adapter to meet different requirements. The 5-in-1 LCD display center displays fuel consumption, output, voltage, frequency, runtime and more. With a parallel kit, you can simply connect two AIVOLT 8000 watts inverter generators together to double your power. (parallel kit not included).
  • 【CO Protect & Low Oil Shutoff】 This power inverter generator is equipped with CO Alert technology, which can help protect you and your family by automatically shutting down the generator if unsafe levels of carbon monoxide are detected. The low-fuel automatic shutdown combines with built-in overload protection and indicator lights to protect both your generator and your electronics from damage.
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock