Categories

Best Paste Hardener

Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-Duct 907, 10 gm kit

  • Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100.
  • Mechanical Properties Hardness, Shore D 83 Adhesive.
  • Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002.
  • cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C.
  • Mix Ratio, parts by weight 100/100 Resin/Hardener.
Check Stock

Thermal Grizzly Hydronaut - Conductive High Performance Thermal Paste - Extensive for air Cooling Systems Water Cooling for All heatsinks CPU and GPU 7,8 Gram / 3 ml

  • Thanks to its excellent thermal conductivity, Hydronaut can be used in the overclocking sector, but it has been specially developed for users with....
  • The convenient syringe makes this Thermal Compound very easy to apply and goes exactly where it should. CPU and cooling, GPU, LEDs, heat dissipating....
  • Thermal Grease perfectly conducts heat, is safe, does not integrate with the processor.
  • Thermal conductivity 11.8 W/Mk Thermal resistance 0.0076 K/W.
  • Compatible not only with computers or laptops, but also with PS3 PS4 or PS5 Xbox 360, One, Series S and X consoles.
  • Thermal paste Hydronaut does not harden and has high long-term stability.
  • The paste does not need hardener, does not contain silicone and does not....
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 50gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 2.5gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

TotalBoat Crystal Clear Epoxy Kits (Gallon)

  • PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair projects. For use on wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel, and lead. Not suitable for clear-coating applications.
  • IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating. Combine with fillers to make a high-strength fairing compound, filleting material, or adhesive.
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75°F for Fast Hardener, to 20 minutes @ 75°F for Slow Hardener.
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, calibrated pumps, mixing sticks and mixing cups. Compatible with other 5:1 epoxy resin systems.
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you d....
Check Stock

Electrically Conductive Epoxy, Silver Adhesive, Room Temperature Cure, Air Dry AA-Duct 902, 2.5gm kit (1) (One Pack)

  • Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100.
  • Mechanical Properties Hardness, Shore D 83 Adhesive.
  • Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0002.
  • cure time 2 minutes AT 120°C,5 minutes At 100°C,12 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener.
Check Stock

TotalBoat 5:1 Epoxy Resin Kit (Quart, Slow Hardener), Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

  • PREMIUM EPOXY KITS include enough 5 to 1 marine epoxy resin and hardener to complete a variety of boat building and epoxy repair projects For wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel and lead Not for clear-coating projects.
  • IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics Self-leveling properties ideal for coating and laminating Combine with fillers to make a high-strength, moisture-resistant fairing compound, filleting material or adhesive.
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 min at 75F for Fast Hardener, to 20 minutes at 75F for Slow Hardener Cures to a high-strength, moisture-resistant, light amber plastic solid that can be sanded and shaped.
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin, hardener, calibrated pumps, mixing sticks and mixing cups. Compatible with other 5:1 epoxy resin systems.
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin.
Check Stock

TotalBoat High Performance Epoxy Kit, Crystal Clear Marine Grade Resin and Hardener for Woodworking, Fiberglass and Wood Boat Building and Repair (Quart, Fast)

  • EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for clear coating. Simple mix ratio of 2 parts resin to 1 part hardener.
  • NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low VOCs make it great for shop or indoor use. Cured surface is BPA-free, safer for potential food contact.
  • CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium Hardener is ideal for most applications. Fast Hardener has the shortest working time and fastest cure.
  • CHOOSE EPOXY KIT SIZE: Pint, Quart, Gallon or 2 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps, mixing sticks and mixing cups. Compatible with epoxy thickeners, fillers and coloring agents.
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time.
  • easy-to-use pumps are calibrated so all you do is mix ONE full pump of hardener to every ONE full pump of resin.
Check Stock

TotalBoat-510825 High Performance Epoxy Kit, Crystal Clear Marine Grade Resin and Hardener for Woodworking, Fiberglass and Wood Boat Building and Repair (Gallon, Medium)

  • EPOXY KITS include low-viscosity resin and clear, non-blushing hardener for woodworking, boat building, laminating and repair projects. Ideal for clear coating. Simple mix ratio of 2 parts resin to 1 part hardener.
  • NON-BLUSHING EPOXY system means no time-consuming washdowns to remove surface blush between coats, so projects get finished faster. Low odor and low VOCs make it great for shop or indoor use. Cured surface is BPA-free, safer for potential food contact.
  • CHOOSE SLOW, MEDIUM, OR FAST HARDENER to control working properties and cure times. Slow Hardener has the longest working and cure times. Medium Hardener is ideal for most applications. Fast Hardener has the shortest working time and fastest cure.
  • CHOOSE EPOXY KIT SIZE: Pint, Quart, Gallon or 2 Gallon. All TotalBoat Epoxy Kits come with calibrated pumps, mixing sticks and mixing cups. Compatible with epoxy thickeners, fillers and coloring agents.
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 2 parts resin to 1 part hardener ratio for a proper cure every time.
  • easy-to-use pumps are calibrated so all you....
Check Stock

TotalBoat 5 1 Epoxy Resin Kit Gallon Fast Hardener Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

  • PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair....
  • IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating.....
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75°F for Fast Hardener, to 20 minutes @ 75°F for Slow Hardener.
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin,....
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use....
Check Stock

TotalBoat 5 1 Epoxy Resin Kit Quart Fast Hardener Marine Grade Epoxy for Fiberglass and Wood Boat Building and Repair

  • PREMIUM EPOXY KITS include enough 5:1 marine epoxy resin and hardener to complete a variety of boat building, composite construction, and epoxy repair....
  • IDEAL VISCOSITY for wetting out fiberglass cloth and other reinforcement fabrics. Self-leveling properties are ideal for coating and laminating.....
  • CHOOSE FAST OR SLOW HARDENER: Pot life ranges from 12 minutes @ 75°F for Fast Hardener, to 20 minutes @ 75°F for Slow Hardener. Minimum recommended....
  • CHOOSE FROM THREE EPOXY KIT SIZES: Quart, Gallon, and 4.5 Gallon, with your choice of TotalBoat 5:1 Fast or Slow Hardener. Kits include resin,....
  • PUMPS INCLUDED: Metered resin and hardener pumps provide the exact 5 parts resin to 1 part hardener ratio for a proper cure every time. Easy-to-use....
Check Stock

Thermalright Thermal Pad 12.8 W/mK Non Conductive Heat Dissipation Silicone Pad for PC Laptop Heatsink/GPU/CPU/LED Graphics Card, Silicone Thermal Pads 85×45mm Silicone Grease Pad Multi-Size(3.0mm)

  • Thanks to its excellent thermal conductivity, Hydronaut can be used in the overclocking sector, but it has been specially developed for users with large heatsinks.
  • The convenient syringe makes this Thermal Compound very easy to apply and goes exactly where it should. CPU and cooling, GPU, LEDs, heat dissipating ribbed plates.
  • Thermal Grease perfectly conducts heat, is safe, does not integrate with the processor.
  • Thermal conductivity 11.8 W/Mk Thermal resistance 0.0076 K/W.
  • Compatible not only with computers or laptops, but also with PS3 PS4 or PS5 Xbox 360, One, Series S and X consoles.
  • It perfectly dissipates heat from Macbooks.
  • Thermal paste Hydronaut does not harden and has high long-term stability.
  • The paste does not need hardener, does not contain silicone and does not conduct electricity.
Check Stock

Marine Coat One Gel Coat Repair Kit with Complete Color Match Set for Scratches Nicks Gouges and Holes 6 Colors

  • “EVERYTHING YOU NEED: For a Perfect FIX Every time!!” Marine Coat One Gel Coat Repair Kit is the only complete kit on the market using the highest....
  • The Marine Coat One Gel Coat Repair Kit permanently repair nicks, gouges, and scratches in fiberglass hulls and decks. Mix the included coloring....
  • KIT INCLUDES: Polyester Gel Coat Repair Paste 2 oz. / 4 oz. Liquid Hardener .25 oz. (7.4 ml) 6 color Pigments .25 oz. (7.4ml) Cleaning Solvent 1 oz.....
Check Stock