Categories

Best Pcb Assemblies

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 66cm Length 2.54mm Pitch Type-B

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • The "Type-B" means the pin holes towards to the same side, meanwhile, the two buckles are both inside..
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 148cm Length 2.54mm Pitch Type-C

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • The "Type-C" means the pin holes towards to the same side, meanwhile, the two buckles are both outside..
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

CableCreation Mini SAS 26Pin (SFF-8088) Male to 4 SATA 7Pin Female Cable, Mini SAS Host/Controller to 4 SATA Target/Backplane, 2M / 6.6FT

  • Internal HD Mini SAS soff-8643 to Mini SAS 36pin (soff-8087) connection cable.
  • High density (HD) mini-sass soff-8643 internal cable assemblies are available for SAS 2. 1, 6GB/s and SAS 3. 0, 12GB/s specification.
  • Soff-8643 is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices.
  • Hybrid versions of these new cables will allow for a smooth transition from 6GB to 12GB.
Check Stock

OIKWAN Internal HD Mini SAS SFF-8643 to SFF-8643, Internal Mini SAS to Mini SAS Cable, Compatible with RAID or PCI Express Controller(1.6FT/0.5M)

  • Internal HD Mini SAS SFF-8643 to Mini SAS 36Pin (SFF-8087) Connection Cable.
  • High Density (HD) MiniSAS SFF-8643 Internal cable assemblies are available for SAS 2.1, 6Gb/s and SAS 3.0, 12Gb/s specification.
  • SFF-8643 is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices.
  • Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb.
Check Stock

OTC Tools 5080A Leaf Spring Pin and Bushing Service Set (Truck Front)

  • Delivers 10 tons of hydraulic force to remove and install truck front spring eye bushing assemblies quickly and easily.
  • Services bushings with diameters from 1-1/4 inch through 1-7/8 inch and pin diameters from 7/8 inch through 1-1/8 inch.
  • Handles all popular OE and aftermarket components including Horton pin and bushing assemblies.
  • Service bushing assemblies in many cases without removing leaf spring hangers and spring assemblies from the vehicle.
  • All accessories are included except the hydraulic hand pump which must be purchased separately.
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

(5 Pack) Standard Threaded Brass Bowls - Lighting Fixture Spare Parts - Standard Decorative Bowls

  • For use with Standard Size Deacon Smith Lighting Fixture Assemblies and Spare Partsi.
  • Standard 1/8 IP Threads for use on most lighting fixtures and some assemblies.
  • Brass Spare Parts for Deacon Smith Assemblies.
  • Compatible with Deacon Smith Standard Conduit Downstems and Standard Decorative Parts.
Check Stock

Delphi FG1371 Fuel Module

  • Delphi fuel modules and pumps are designed to deliver an immediate, uninterrupted flow of fuel to the engine's fuel rail and injectors at the specified system pressure, resulting in more efficient operation.
  • Where required, fuel assemblies include integrated fuel level sensing components that deliver an accurate reading of the fuel level in the tank to the fuel gauge.
  • Delphi fuel pump assemblies are built with OE-validated parts and include OEM-grade wiring, electrical connectors and level sensor assemblies that deliver increased performance, durability and reliability over other aftermarket fuel pumps.
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

  • Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
  • Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
  • The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
  • PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check Stock