Categories

Best Pcb China

Soundstream ST4.1200D Stealth Series 1200W Class D 4 Channel Amplifier

  • Stealth Series 1200W class D 4 channel amplifier RMS power 4Ω: 100X4/ RMS power 2ω: 150X4/ bridged 4Ω: 300X2 2-Ohm stereo &.
  • 4-Ohm bridged full-range operation Hybrid aluminum alloy heatsink for optimum dissipation Military grade SMT PCB maintains dynamic performance.
  • Package dimensions: 7.75" L x 3.0" W x 1.5" H.
Check Stock

Soundstream PN1.1000D 1000W Monoblock Picasso Nano Series Class D Amplifier,Black

  • Stealth Series 1200W class D 4 channel amplifier RMS power 4Ω: 100X4/ RMS power 2ω: 150X4/ bridged 4Ω: 300X2 2-Ohm stereo &.
  • 4-Ohm bridged full-range operation Hybrid aluminum alloy heatsink for optimum dissipation Military grade SMT PCB maintains dynamic performance.
  • Package dimensions: 7.75" L x 3.0" W x 1.5" H.
Check Stock

GRAYHILL 70M-IAC5 I/O Module

  • 4 DPDT signal relay module. TAKAMISAWA RY24W-K high quality relays, switch contact material - gold overlay silver-palladium..
  • Darlington transistor circuits drive relay coil, LED indicator for each relay channel..
  • High quality screw terminal block. FR-4 fiber glass PCB, dual copper layers..
  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/91Ml0Tph-rL.pdf.
Check Stock

OONO DIN Rail Mount 30A/300V 2x12 Position Screw Terminal Block Distribution Module.

  • DIN Rail mount 8 Channel 10Amp SPDT Power Relay Module, DC 5V Version..
  • JS1-5V-F Power Relays. LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
  • High quality terminal block: Pitch 5.0mm/0.197.
Check Stock

DC Power Fuse Distribution Strip Module 12 Position Screw Mount

  • Working voltage DC 0 to 32V. Maximum total input current 30 Amps. 12 Channels output, each channel maximum output current 3 Amps (Factory-installed....
  • Input terminals pitch 7.62mm/0.3", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw.....
  • Output terminals pitch 5.0mm/0.197", wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw..
  • Fuse holders for Medium Blade ATO/ATC Fuse, the fuse can be removed and replaced very easily. With fuse fail indication function, when you connected....
  • FR-4 fiberglass dual copper layers PCB. Taiwan High quality fireproof nylon material mount carrier(not China low quality carrier). Also included two....
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

CZH-LABS DIN Rail Mount DSUB DB50 Male/Female Header Interface Module D-SUB Breakout Board.

  • Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
  • Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
  • Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
  • FR-4 fiber glass PCB, dual copper layers..
  • High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check Stock

Electronics-Salon DIN Rail Mount 8 DPDT Signal Relay Interface Module. (Operating Voltage: DC 24V)

  • DIN Rail Mount 8 Channel DPDT Signal Relay Interface Module, DC 24V Version..
  • RYxxW-K high quality signal relays, LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
  • Pitch 3.81mm / 0.15" screw terminal block, wire range 26-16AWG, strip length 5mm / 0.2", Metric M2 slotted screw..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1vg1+5HA8L.pdf.
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

CZH-LABS DIN Rail Mounting Carrier Housing with Prototype Board PCB Size 20.3mm x 73mm.

  • PCB Dimensions: 20.3 x 73mm. Thickness : 1.6mm. Material : FR-4 (glass fiber). All holes are plated through, top and bottom solder pad are identical..
  • CN1 and CN2 3Pin terminal blocks pin pitch 5.0mm/0.197", other pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
  • Terminal Block: Pitch 5.0mm/0.197" screw terminal blocks. Wire range 26 to 12AWG / 2.5mm square. Strip length 7mm / 0.28” Screws - M2.5, steel, Cr3+....
  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier(not China low quality carrier), can support width 35mm, 32mm and 15mm rail..
  • External dimensions: L22.5mm x W78mm x H40.1mm.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

Electronics-Salon DIN Rail Mount AC/DC 24V Control 8 SPDT 16Amp Pluggable Power Relay Module, G2R-1-E

  • OMRON G2R-1-E industrial power relays, switching current up to 16A at 250VAC (or 30VDC), and easy to replace pluggable relays..
  • LED indicator for each relay channel , relay coil protection by means of a freewheeling diode..
  • High quality screw terminal block, FR-4 fiber glass PCB, dual copper layers..
  • Panel mount or DIN rail mount versions are available. Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
Check Stock