Best Pcb Holder 2

WindyNation ANL Fuse Holder + ANL Fuse (2pcs 200A Fuse)

• 200 Amp ANL Fuse Included；Rated voltage :.
• Inline ANL Holder is suitable for 0 2 4 Gauge Square.
• Fuse Size: 80 x 21 x 8mm/ 3.1" x 0.8" x 0.3" (L*W*T).
• Holder Size: 123 x 38 x 38mm / 4.8" x 1.5" x 1.5" (L*W*H).

Helping Hands Soldering, Toolour Magnetic Helping Hand for Soldering, 4 PCB Circuit Board Holder and Flexible Helping Arms, Third Hand Tool with Heavy Duty Base for Electronic Repair Hobby Craft

• Helping Hands Soldering: Circuit Board Holder has 4 pillars, each pillar is magnetic, adjustable magnetic helping hands can be positioned anywhere on the heavy steel base, which can support any shape of the board. Completely free your hands and let you focus on the soldering detail work once start using our excellent third-hand soldering tools..
• Magnetic Helping Hand Tool: 4 flexible metal gooseneck arms with strong magnetic base, which have a powerful attraction to the steel base. We included two 9.8″ arms, two 5.9″ arms helping hand arms, completely free your hands up and work easier than ever before. The 360° rotating alligator clip allows you to be more flexible in welding work..
• Magnetic PCB Holder Pillars: 4 small pillars can hold a PCB board by their multi-layer or tips through the location hole component point. Full metal body is anti-rust and corrosion-resistant, powder-coated promises a longer usage. To make sure the PCB you worked on can be positioning steadily, the pillars’ tips are better to hold boards by 4 location holes..
• Stainless Steel Base: 9″ x 5. 9″ heavy duty base with industrial-grade weighted construction, never tip over, powder-coated iron base. 4 pcs rubber feet prevent the stable soldering station from sliding ....

Baomain ANL-40A Electrical Protection ANL Fuse 40 Amp with fuse holder 1 Pack

• Inline ANL Holder is suitable for 0 2 4 Gauge Square.
• Fuse Size: 80 x 21 x 8mm/ 3.1" x 0.8" x 0.3" (L x W x T).
• Holder Size: 123 x 38 x 38mm / 4.8" x 1.5" x 1.5" (L*W*H).

Baomain ANL-50A Electrical Protection ANL Fuse 50 Amp with Fuse Holder 1 Pack

• Inline ANL Holder is suitable for 0 2 4 Gauge Square.
• Fuse Size: 80 x 21 x 8mm/ 3.1" x 0.8" x 0.3" (L x W x T).
• Holder Size: 123 x 38 x 38mm / 4.8" x 1.5" x 1.5" (L*W*H).

Elefama 14 Gauge Inline Fuse Holder 12V-DC ATC/ATO 12Pcs Blade Fuse Holders kit with 60 Pcs Standard Car Fuses 14 AWG Wiring Harness Waterproof Pigtail for Fuses 2A 3A 5A 7.5 A 10A 15A 20A 30A

PROfezzion 4 Slots Portable SD Card Holder, [Water-Resistant] [Anti-Shock] SD Card Case Storage for 4 SD /SDXC /SDHC Cards, Memory Card Hard Carrying Box Keeper Protector with Rubber Interior, Grey

• [Sturdy & Durable Polypropylene Shell]: Made of high-quality and eco-friendly material, the PROfezzion PCB series memory card holder can effectively protect your memory cards from dust, shock, dirt, water splashing, and a weather-resistant seal.
• [Molded Rubber Lining]: The molded protective rubber lining has the characteristic of shock absorption, which can greatly reduce shock and impact to better protect your memory cards. Moreover, the molded rubber interior is strictly tailored to hold memory cards securely and snugly.
• [Snap-on Locking System]: The ergonomic locking system keeps the cards securely in the SD card wallet while allows you to open them with your finger easily.
• [Molded Eyelet]: The molded eyelet can attach the SD card storage to a strap or hook. With a compact and portable design, the case can be taken along conveniently. The PROfezzion PCB series SD card organizer will be a good partner for storing your memory cards.
• [Compatibility]: The SD card holder case adopts a compact design, the two sides both allow you to store 2 SD cards, a total of 4 slots. It was designed to hold up SD / SDXC / SDHC / SecureDigital Card.

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

• Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
• PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
• PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
• All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..

ZOOKOTO 0/2/4 Gauge AWG Inline ANL Fuse Block Fuse Holder with 250A ANL Fuse for Car Audio Amplifier(2 Pack)

• Car audio ANL fuse holder with 250A ANL fuse（2 pack）.
• Gold/Nickel plated terminal,corrosion resistance.
• 1/ 0 or 4 Gauge Input （Diameter: 10mm）.
• Visible through clear window to easily identify open status.

Soldering Station Helping Hands with Magnifying Glass Third Hand Solder Tool PCB Holder - Heavy Duty Base Plate | Four Flexible Arms

• ...k Accuracy】The soldering station is equipped with a 3x magnifying glass, whick can help you magnify small electronic components, third hand tool can improve your work efficiency and welding accuracy, and you no longer have to be tired of small parts..
• 【Will Not Scratch The PCB Board】 The alligator clips on pcb holder arm are fixed with screws and can be rotated 360 degrees, and each clip is equipped with an insulating rubber sleeve, which can prevent scratching the circuit of the PCB board and prevent electrical short circuits..
• 【Customer Satisfaction】Our service tenet is to make you 100% satisfied with our products. If the product does not meet your expectations, please feel free to send us a message via “Contact Seller”, we will handle it for you.

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

• Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
• 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
• Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

• 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
• 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
• 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
• 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
• 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....

60 Pieces Pin Vises Hand Drill Bits Micro Mini Twist Drill Bits Set with Precision Hand Pin Vise Rotary Tools for Wood,Jewelry, Plastic etc

• 【Package Contant】1 piece pin vise hand drill, 48 pieces of micro twist drill bits (0.5-3.0mm), 10 pieces of PCB mini drill bits (0.3-1.2mm), and 1 piece bench vise..
• 【Pin Vise】Made of quality aluminum alloy, durable and firm, adopt 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp which is sturdy and convenient for you to operate, its tail can be rotated, easy for you to use.
• 【48 Pieces Twist Drill Bits 】Include 3 Pieces of 0.5，0.6，0.7，0.8，0.9，1.0mm size, total 18 piece.
• 2 pieces of 1.1，1.2，1.3，1.4，1.5，1.6，1.7，1.8，1.9，2.0mm size, a total of 20 pieces.
• 1 piece of 2.1，2.2，2.3，2.4，2.5，2.6，2.7，2.8，2.9，3.0mm size, a total of 10 pieces.
• 【10 Pieces PCB Drill Bit】PCB mini drills are made of tungsten carbide, the shank diameter is approx. 3.175 mm, overall length is approx. 38 mm, which fit for processing PCB, normal FR-4, CEM-3 boards, SMT, CNC, molds, plastic, circuit board, carbon fiber, composite board and so on.
• 【Fit dimension】 the pin vise is approx. 3.54 x 0.6 inches/ 9 x 1.4 cm, bench vise is approx. 4.3 x 2.4 x 1.4 inches/ 11 x 6.1 x 3.5 cm, can be appropriate for you to put in your bag or pocket.

Delay-1 DIY Guitar Pedal Kit With 1590B Aluminum Metal Stomp Box Case Enclosure

• 1.This Kit is super easy to build and very rewarding.
• 2.The PCB is designed to fit perfectly inside the pre- drilled 1590B enclosure(included).
• 3.Our PCB is a double-side welding high-quality and professionally designed and produced PCB board.