Soundstream ST4.1200D Stealth Series 1200W Class D 4 Channel Amplifier
- Stealth Series 1200W class D 4 channel amplifier RMS power 4Ω: 100X4/ RMS power 2ω: 150X4/ bridged 4Ω: 300X2 2-Ohm stereo &.
- 4-Ohm bridged full-range operation Hybrid aluminum alloy heatsink for optimum dissipation Military grade SMT PCB maintains dynamic performance.
- Package dimensions: 7.75" L x 3.0" W x 1.5" H.
Check StockSoundstream PN1.1000D 1000W Monoblock Picasso Nano Series Class D Amplifier,Black
- Stealth Series 1200W class D 4 channel amplifier RMS power 4Ω: 100X4/ RMS power 2ω: 150X4/ bridged 4Ω: 300X2 2-Ohm stereo &.
- 4-Ohm bridged full-range operation Hybrid aluminum alloy heatsink for optimum dissipation Military grade SMT PCB maintains dynamic performance.
- Package dimensions: 7.75" L x 3.0" W x 1.5" H.
Check StockYellow Sanwa LB35 Balltop for JLF Joysticks
- Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
- Replacement microswitch PCB for Sanwa JLF series Joysticks.
- Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
- Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
- Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check StockGRAYHILL 70M-IAC5 I/O Module
- 4 DPDT signal relay module. TAKAMISAWA RY24W-K high quality relays, switch contact material - gold overlay silver-palladium..
- Darlington transistor circuits drive relay coil, LED indicator for each relay channel..
- High quality screw terminal block. FR-4 fiber glass PCB, dual copper layers..
- Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
- Datasheet: https://images-na.ssl-images-amazon.com/images/I/91Ml0Tph-rL.pdf.
Check StockOONO DIN Rail Mount 30A/300V 2x12 Position Screw Terminal Block Distribution Module.
- DIN Rail mount 8 Channel 10Amp SPDT Power Relay Module, DC 5V Version..
- JS1-5V-F Power Relays. LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
- DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
- High quality terminal block: Pitch 5.0mm/0.197.
Check StockDC Power Fuse Distribution Strip Module 12 Position Screw Mount
- Working voltage DC 0 to 32V. Maximum total input current 30 Amps. 12 Channels output, each channel maximum output current 3 Amps (Factory-installed....
- Input terminals pitch 7.62mm/0.3", maximum current 30 Amps for per position, wire size 26~10 AWG, stripping length 8mm, Metric M3 slotted screw.....
- Output terminals pitch 5.0mm/0.197", wire size 26~12 AWG, stripping length 7mm, Metric M2.5 slotted screw..
- Fuse holders for Medium Blade ATO/ATC Fuse, the fuse can be removed and replaced very easily. With fuse fail indication function, when you connected....
- FR-4 fiberglass dual copper layers PCB. Taiwan High quality fireproof nylon material mount carrier(not China low quality carrier). Also included two....
Check StockArcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC
- Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
- Replacement microswitch PCB for Sanwa JLF series Joysticks.
- Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
- Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
- Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock
Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard
- 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
- 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
- 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
- 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
- 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check StockGK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB
- Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
- Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
- The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
- PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
- There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check StockGardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)
- Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
- 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
- Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check StockYMDK GK61x GK61xs GK64x GK64xs Anodized Aluminum CNC Case (Only Aluminum Case)
- Package Included: CNC Case + Rubber Feet + Screws.
- New GK61x GK61xs GK64x GK64xs plate and PCB can install in directly..
- Old GK61 GK64 plate can't use since the size is bigger than normal 60 case.You can just replace a GH60 size customized plate is ok.The plate need to be compatible with GK61 PCB..
- How to judge old and new edition: Old GK61 GK64 PCB is white and only support single 6.25u space New GK61x GK61xs GK64x GK64xs PCB is black and can support split space and single space at the same time..
- There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.If little keys not working,check the switch pin whether it's bent at first.Especially Kailh switches.
Check StockCZH-LABS DIN Rail Mount DSUB DB50 Male/Female Header Interface Module D-SUB Breakout Board.
- Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
- Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
- Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
- FR-4 fiber glass PCB, dual copper layers..
- High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check StockElectronics-Salon DIN Rail Mount 8 DPDT Signal Relay Interface Module. (Operating Voltage: DC 24V)
- DIN Rail Mount 8 Channel DPDT Signal Relay Interface Module, DC 24V Version..
- RYxxW-K high quality signal relays, LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
- DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
- Pitch 3.81mm / 0.15" screw terminal block, wire range 26-16AWG, strip length 5mm / 0.2", Metric M2 slotted screw..
- Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1vg1+5HA8L.pdf.
Check Stock
