Categories

Best Pcb Mounted Connector

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • Working condition: these LED light strip connectors are able to stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
Check Stock

AEDIKO 50pcs CR2032 Vertical Button Cell Battery Sockets 3 Pin Holder Case Plastic Shell Type Black

  • 50pcs CR2032 Coin Button Cell Holder,Fits CR2032 Button Cell (Battery is NOT Included).
  • Body Size: 23 x 18 x 5mm / 0.9" x 0.7" x 0.2"(L*W*H).
  • Two Negative Leads, and One Positive Lead,Easy to Connect to the Pin Connector.
  • Vertically Mounted,Easy to Insert or Remove, Holding the Battery in Place Firmly.
  • Ideal Accessories for DIY Project or Other Electric PCB Board.
Check Stock

Xtrfy K5 Compact RGB Black, US Layout

  • Super-scan technology for instant response.
Check Stock

DaFuRui Screw Terminal，60Pack 5MM Pitch 2 Pin and 3 Pin PCB Connector Mount Breadboard Screw Terminal Block Connector for Arduino (2 Pin-50PCS, 3 Pin-10PCS)

  • ★【Excellent Quality】100% brand new and high 2 Pin and 3 Pin PCB Mount Screw Terminal Block Connector.
  • ★【Powerful function】The terminals can be spliced. There are various combinations.Two Size of 2 pin and 3 pin for you to choose.
  • ★【Standard sizes】Rated Value : AC 300V, 16A, Pitch : 5mm/0.2"，For wire size: 14-22AWG，Contact resistance: 20mΩ.
  • ★【Good Material】ABS Plastic, Electric Parts，Color:Blue，Reeds are phosphor bronze nickel-plated, stainless steel screws are M2.5.
  • ★【Package Content 】60Pack 5MM Pitch 2 Pin and 3 Pin PCB Connector，2 Pin-50PCS, 3 Pin-10PCS Terminal Block Connector.
Check Stock

Hyekit Custom Gaming Keyboard - Alice Layout 66 Keys - Support QMK/Via - Gasket Structure - USB C Wired Mechanical Keyboard Kit - RGB Hot Swappable Switches & Keycaps - Acrylic Shell - Transparent

  • ...fer to our assembly instruction video for assembly. Let’s enjoy the process of assembling the keyboard and the great sense of achievement brought by the successful assembly.).
  • 【Custom Gaming Keyboard】Hot-swappable PCB uses Kailh hot-swappable socket and supports 3-pin and 5-pin mechanical switches. Support PCB Mounted and Plate Mounted stabilizers, we recommend you to use PCB Mounted stabilizers. 32U4 chip master, support QMK/VIA, more customized, you can use it to modify key functions and customize more functions. Wired mode, supports USB-C, typing response is faster..
  • 【Alice Layout】The Alice layout considers the natural input angle of the wrist from the perspective of ergonomics. When using the conventional arrangement keyboard for continuous high-intensity input work, the unnatural bending of the wrist will easily lead to hand fatigue, and the Alice layout can solve this problem very well, it takes into account the integrity of the keyboard and the relatively relaxed input state of the wrist..
  • 【South-facing RGB Backlit】Alice66 has 66 lamp beads + 16 bottom lamps, 16 million color RGB backlight, the RBG Backlight effect is very bright even in the daytime. The lower lamp position is designed so that the light will not be blocked by the sw....
Check Stock

OLLGEN Auto Car OBD2 16 Pin Connector 16 Pin Male Connector Adapter Standard 16 Pin Male Plug OBD Shell OBDII PCB Diagnostic Tool Blue

  • Male Adapter with PCB: It can connect circuit board or weld line with PCB board.The shell is easily four inches long, plus a spring strain relief. you....
  • The soldier pads inside the shell do not have all the pins broken out, but you can just solder to the pin connections directly for odd pin outs. Note....
  • Used to build a breakout box:Lots of cars do not have 16 pin connector,such as some old cars. However now lots of diagnose tool is 16 pin connector,so....
  • Notice:It is just a small connector,do not have any accessory or software.Has a circuit board you could tack connections..
  • Package Include:Standard 16Pin Male Plug x 1.
Check Stock

Gateron V2 Clear Stabilizers PCB Mount Screw in Stabilizer Customized Distance No Dropping Wire for Mx Mechanical Keyboard PCB (Gateron Stab V2 Clear 1+4)

  • This is Gateron PCB Mount Screw In Crystal Stabilizer，.
  • Package Included：1x6.25u +1x7u +4x2u PCB Mount Screw-in Stabilizers + pad + Screws For 60% 68 75 84 87 Keyboard.
  • The plastic inserts and boat only has 10 pcs each. There is extra wire presented, but no plastic insert boat presented.
  • If your keyboard is 96 or 104 108 layout,need to buy 2 set.
  • This stabilizers are PCB screw-in stabilizers which is directly mounted on PCB.V2 stabilizers is designed to prevent the wire from dropping off.It's more stable than old edition..
Check Stock

YMDK Aluminum Brush Finish ANSI Anodized Positioning Board Plate Plate-Mounted for GH60 PCB GK61 GK61x Hot Swap PCB

  • Package Included: 1x plate.There is no screws and copper stand included..
  • Pls note: Original GK61 GK61x GK61xs plastic case can't use this plate directly.Need to replace a GH60 compatible case.
  • This plate is anodized brush finished.It can only use with plate mounted stabilizers.
  • If you use with GK61 /GK61x PCB,can just mount 4-5 switches into the plate corner and then plug to PCB socket totally.After the plate PCB fixed,then mount other switch in 1 by 1 is ok.At last screw plate PCB togehter to GH60 size case is ok with the screws in your case..
Check Stock

FDSF USB 3.1 Type C to Type C Extension Cable 90 Degree FPC FPV Ribbon Flat USB C Cable 3A 10Gbps EMI Shielding, 30cm

  • The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The PCB power circuit is strengthened and the use of 2 5V power core wires is strengthened, so that the transmission current is more powerful. Support up to 3A..
  • The differential signal has no via hole design, the signal is pure, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF short circuit phenomenon, and the product is durable..
  • Product application: GPS navigator, storage device, imaging device, for Pi 4 for MCU development board, built-in USB device to extend the use of , convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc..
  • Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector..
Check Stock

Cermant 3-Pin 5.08mm Pitch Male Female Plug-in PCB Screw Terminal Block Connector (5.08mm-3P-20Set)

  • Pin Number : 3 Pin Distance : 5.08mm/0.2"..
  • These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments.
  • Package Content: 20 Set x PCB Terminal Block Connector.
Check Stock

EPOMAKER Skyline Gasket-Mounted 75% Hot Swappable Wired Gaming Keyboard DIY Kit with RGB Backlight, Rotary Knob, Compatible with 3Pin 5Pin Gateron/Cherry/Kailh/Otemu Switch (Transparent)

  • 【Gasket-Mounted Structure】Gasket mounting is a type of keyboard mounting, where no screw holes are drilled into the switch plate. Instead, the switch plate is wedged in between the case layers and PCB through the support of rubber strips, or gaskets. Compared to a top mount system, a gasket-mounted keyboard has a cleaner sound profile because the gaskets cushion the shock of each keypress. Gasket-mounted keyboards also give a softer typing experience, which helps avoid hand fatigue for those who type for long periods. On the other hand, top-mounted keyboards tend to be stiffer.
  • 【82 Keys 75% Compact Layout】EPOMAKER Skyline custom wired mechanical keyboard DIY kit is designed in a favored compact 75% layout by the community to maximize the function while not waste a minimum of space. This layout is widely used and loved by the community and Skyline will surely beyond your expectation with the hot swappable socket and programmable software, amazing RGB backlights.
  • 【Hot Swappable PCB, Compatible with 3Pin/5Pin Switch】EPOMAKER Skyline Kit is equipped with hot swappable PCB to ensure free replacement or change of switches. You don’t need to solder it. It is compatible with most 3 pin and 5 pin mechanical switches, such as Cherry, Gateron, ....
Check Stock

CableCreation Internal HD Mini SAS (SFF-8643 Host) - 4X SATA (Target) Cable,SFF-8643 to 4X SATA Cable, SFF-8643 for Controller, 4 Sata Connect to Hard Drive, 1M / 3.3FT

  • [ SFF-8643 Cord ] The SFF-8643 is the latest HD Mini SAS connector design for implementing HD SAS Internal interconnect solutions..
  • [ High Data transfer] 36 pin High Density (HD) Mini SAS SFF-8643 Internal cable assemblies are available for SAS 2.1, 6Gb/s and SAS 3.0, 12Gb/s specification. Hybrid versions of these new cables will allow for a smooth transition from 6Gbps to 12Gbps.
  • SFF-8643 is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices.
  • [ SFF-8643 Port ] SFF-8643 interface is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. It support up to 4-ports (4 lanes) of SAS data and is compliant with the latest SAS 3.0 spec.
  • [ What You Get] 1 x CableCreation 3 FT Mini SAS SFF-8643 Cable. CableCreation provide 24 Months Warranty and lifetime Technical Service.
Check Stock