Categories

Best Pcb Production Equipment

Genie Sequencer Board 34019R

  • 【Dimension】 -Size：100mmx75mm/3.94"x2.95"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers isdouble sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

FANCYWING 400MMX 1.0MM 1.5MM 2.0MM 2.5MM 3.0MM 4.0MM 5.0MM 5 PCS Carbon Fiber Rod for RC Airplane DIY Craft 5mm Matte Pole 400mm

  • Features: Strong Strength and Light Weight.
  • The carbon fiber rod has good heat resistance, corrosion, rubbing performance, high strength, stable and surface smoothness..
  • Application: Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods..
Check Stock

FANCYWING 200MMX 1.0MM 1.5MM 2.0MM 2.5MM 3.0MM 4.0MM 5.0MM 5 PCS Carbon Fiber Rod for RC Airplane DIY Craft 1.5 mm Matte Pole 200mm

  • Features: Strong Strength and Light Weight.
  • The carbon fiber rod has good heat resistance, corrosion, rubbing performance, high strength, stable and surface smoothness..
  • Application: Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods..
Check Stock

Portico II Master Buss Converter

  • [EASY ADJUSTMENT] PT2399 + NE5532 continuously adjustable reverb and volume, with high performance and low noise..
  • [OUTPUT INTERFACE] With 2 microphone outputs, mixed output and music signal output, with less interference..
  • [EXCELLENT PCB] Using 1.6mm thick double sided PCB, spray tin process, ensure the good passage of large and small currents..
  • [APPLICABLE DEVICE] Support mobile coils and computer electret microphones and most wireless microphones..
  • [WIDE VOLTAGE RANGE] With DC12‑24V wide voltage range, suitable for more audio equipment, has strong practicability..
Check Stock

Cermant 3-Pin 5.08mm Pitch Male Female Plug-in PCB Screw Terminal Block Connector (5.08mm-3P-20Set)

  • Pin Number : 3 Pin Distance : 5.08mm/0.2"..
  • These PCB screws are snap together well.have a quick release capability.Just need to loosen the screws to land the wires.Use high-quality plastic PA66 high temperature resistant V0 flame retardant,steel screw environmentally friendly electroplating,no slippage.Widely used in electronics,communication equipment,instruments.
  • Package Content: 20 Set x PCB Terminal Block Connector.
Check Stock

Jienk 5Pcs 6-Pin 300V 10A 5.08mm Pitch PCB Mount Screw Terminal Block Connector for 28-12AWG Cable

  • 【Product Name】 6 Pin, Plug-In 5.08mm/0.2" PCB Terminal Block.
  • 【Rated Voltage】300V, Rated Current：10A.
  • 【Easy to Use】No soldering required. Just use a small screwdriver to open up the terminal blocks, slide in your stranded or solid-core wire, and re-tighten. Save you from solder trouble, no need to purchase expensive tool. Great time and money saver..
  • 【Application】: PCB terminal is widely used in electronic equipment, such as small electronic watches, calculates, general computer, communication electronics equipment automatic control system, domestic appliance and warning devices, etc..
Check Stock

Honiwu 125MHz Upconverter Set Variable Frequency Board SDR Receiver Upconverter with Data Cable

  • COMPATIBILITY - RTL2832+R820T2 receivers are available for SDR upconverter groups, radio platforms are available, etc..
  • EASY INSTALLATION - SDR up converter is compact in size, simple in structure, stable in connection, easy to install and operate..
  • EXCELLENT MATERIAL - The combination of ABS and PCB materials has good contact performance to ensure stable work..
  • CONNECTIVITY - Comes with wiring and data cables, low noise operation, low interference and high usability..
  • OWN FACTORY - Strictly inspect the production of goods, check the details of production, and ensure stable production quality..
Check Stock

Liftmaster K001A6837 Logic 4 Board Commercial OEM Genuine

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

Thera Tears Eye Nutrition Softgels 90 ct 5 Pack

  • UNIQUE FORMULA: Utilizes a optimized blend of organic Flaxseed Oil, pharmaceutical grade Fish Oil, and Vitamin E.
  • TEAR PRODUCTION: Designed to enhance tear production for greater eye lubrication and healthy tears*.
  • QUALITY: Molecularly distilled and free from preservatives, PCB, mercury and lignans.
  • DRY EYE THERAPY: Part of the TheraTears Dry Eye Therapy line formulated for Dry Eye symptoms*.
  • DOCTOR CREATED: TheraTears is not only recommmended by doctors, it was created by an Ophthalmologist after 18 years of research.
Check Stock

SoarUp 35A 4 in 1 ESC, 48mhz Frequency Throttle Response BLHeli‑32 4 in 1 ESC for FPV Traversing Machine

  • 35A ESC and Advanced SMTs: Integrate 4 high performance 35A ESCs, built in galvanometer, and purchase new advanced SMTs. After such high integration, the volume is only the same as that of the control of the traversing aircraft, so the installation.
  • Hardware PWM and Damped Light Technology: Hardware PWM drive motor, less noise, more throttle response. Damped Light technology, regenerative braking function, make motor deceleration more sensitive and effective, control more accurate.
  • BLHeli‑S Firmware and ESC Setting: Using BLHeli‑S firmware has powerful performance and rich functions.
  • it also supports setting ESC parameters in various ways, or upgrading ESC firmware (such as setting or upgrading ESC via throttle signal line, using ot.
  • Support and Input Output Line: It not only supports ordinary PWM throttle signal mode, oneshot 125, oneshot 42 and multshot ultra high speed throttle signals, but also supports the latest dshot150 / 300 / 600 digital throttle, with strong anti interferenc.
  • Main Control Chip and PCB Production: EMF8BB21F16G main control chip, operating frequency up to 48mhz. For mosfet, three in one IC driver and high quality high frequency ceramic capacitor. In high end PCB production process, pads are metallized to avoid p.
Check Stock

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

250pcs Standoffs Nylon M2 M3 Male Female Hex Column Standoff Screws Nuts Assortment Kit for Communication Electroplating M3 Male Standoff A

  • 250pcs standoffs are made of durable environmentally friendly nylon PA66, which has stable and long-lasting acid resistance, alkali resistance, insulation and signal interference resistance..
  • The waterproof nylon spacer support is rust-proof and easy to clean. You only need to clean it with a cloth..
  • There are 4 different kits to meet your building needs, including various male or female brackets, nuts and screws..
  • Threaded standoff is very suitable for installation between the PCB circuit board and the machine board. It is very suitable for creating hot channels between chips, or creating multi-layer and multi-layer "nerd" homemade circuit board arrays..
  • They are not easy to slip when used correctly. It is very suitable for installing boards between PCB circuit boards and machines, and is widely used in communications, electroplating, medical equipment, office equipment, electronic products and other industries..
Check Stock