Categories

Best Pcb Prototyping System

MakerSpot Proto Board Breadboard HAT Soldered with Female Pin Connector PCB Prototyping Board for Raspberry Pi Zero W (3 Pack)

  • 164 holes of prototyping area, pre-soldered with Female Pin Header.
  • 4 rows of 6 connected holes for power rails and other purposes.
  • Silkscreen marking for 40-pin Pi Header reference.
Check Stock

KEYESTUDIO 16-Channel 12-bit Servo Motor Driver Board I2C Interface for Arduino

  • This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
  • Uses I2C input, just occupy A4 and A5 interface on the control board.
  • Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
  • Servo power supply independent V + input up to 6V.
  • How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..
Check Stock

SparkFun RedBoard Qwiic ATMega328P compatible with Arduino board w/ Qwiic Connector and CH340C Serial-USB Converter IC Breadboardable R3 footprint microcontroller Improved reset button

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader. Rev3 shield compatible..
  • Program with a USB Micro-B cable using the Arduino IDE platform: Plug in the board, select “Arduino UNO” and you’re ready to upload code.
  • Hardware peripherals you know and love: 20 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts.
  • Broken out the SDA, SCL and IOREF pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC.
  • The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong..
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 80mmx120mm, Green Pack of 4

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 80mm x 120mm / 3.15 x 4.72 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 20mmx80mm, Black Pack of 5

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 20mm x 80mm / 0.79 x 3.15 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock

GeeekPi 4X Prototype Breakout DIY Breadboard PCB Shield Board Kit for Raspberry Pi 4 3 2 B+ A+ (Black)

  • Suitable for Raspberry Pi 4 Model B & Raspberry Pi 3/2 Model B/B+/ Raspberry Pi 1 Model B / Pi 1 Model A+..
  • PCB Dimensions: 57mm x 66mm, Thickness: 1.5mm..
  • To kick off the HAT party, we have this proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more..
  • The holes are connected underneath with traces to mimic the solderless breadboards you're familiar. There's also long power strips for +3V, +5V and Ground connections to the Pi..
  • Package Includes: 4x PCBs, 4x 2x20pin connectors, 1x Screw Set.
Check Stock

MakerSpot Prototyping Board for Raspberry Pi 2 Pi 3 A+ B+ Pi4 v2.2 Soldered with Female Connectors with Pin Header Set in Extra Long & Short Length

  • 348 holes of prototyping area, Full breakout of the 40-pin Pi Header.
  • Holes are connected in row and column groups.
  • Silkscreen marking for 40-pin Pi Header reference.
  • High quality HASL PCB finishing, D0.9mm drill holes and D1.9mm pad size.
  • Pin Headers set: 1 x extra long 40-pin (length: 12mm) stacking header, 1 x short 40-pin (length: 6mm) stacking header.
Check Stock

ESP8266 ESP-12E NodeMcu Lua WiFi Module Connector Development Board, for Arduino IDE Micropython

  • ESP8266 CP2102 NodeMCU ESP-12E WIFI serial wireless module is an open source Lua based firmware, ultra low cost WI-FI modules, development boards for rapid prototyping, integrated with ESP8266 WIFI chips..
  • Use interactive Lua scripts to write hardware code for Arduino, it offers a complete and self-contained Wi-Fi networking solution..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIO..
  • The NodeMCU ESP8266 development board programming model is similar to that of Node.js, more open source and interactive, programmable, simple, 4-layer PCB design, small size..
  • The has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board, without having to press the flash and reset buttons before each flash operation,simultaneity support smart link smart networking..
Check Stock

10K Ohm Trim Potentiometer Breadboard Trim Potentiometer Kit with Knob Variable Resistors Trimmer Potentiometer Assortment Kit Compatible with Arduino, Blue (12 Pieces) (12 Pieces)

  • Package content: you will receive 12 pieces of trim potentiometers with knobs in blue color, suitable for breadboarding and prototyping.
  • Such a sufficient quantity can easily meet your daily usage and replacement demand.
  • Reliable to use: composed of quality material, these breadboard trim potentiometers are safe and sturdy, reliable and stable, will not easily break or deform, which can be applied for long-term use.
  • Reasonable design: with round pins rather than flat blade pins of other trimpots, these linear potentiometers are suitable for both breadboarding and PCB.
  • The knurled knob with arrow design allows you to easily adjust by hand or small flat blade screwdriver.
  • Specification: these trim potentiometers adopt linear resistance change mode, the rotation angle is 270 degrees, and adjustable range is 0-10K ohm, which are easy to connect and can work well.
  • Dimension information: each rotary potentiometer measure approx. 0.375 x 0.375 x 0.19 inch/ 9.5 x 9.5 x 4.9 mm, such a small size only requires little space, which makes them easy for you to store.
Check Stock

Chanzon 120 pin 10cm 20cm 30cm Long Header Jumper Wire Dupont Cable Line Connector Assorted Kit Male Female Ribbon Solderless Multicolor for Arduino Raspberry pi Electronic Breadboard Protoboard PCB

  • Premium Quality: Sturdy male tinned copper pins never fall off, Female pins are perfectly fit for the Male one ,accurate hole-pitch: 2.54 mm. Our 11 core copper wire with low resistance have a better conductivity and more reliable than copper-clad aluminium one..
  • Max current is up to 1A with 24awg wire, The entire jumper wire have been tinned, can be cut from between and resolder. You can flexibly separate them into 1 individual wire perfect for various applications..
  • Compatible with arduino, breadboard, raspberry pi, prototyping, parallax, PCB project, DIY experiment, electronic project, etc..
  • Product: Ribbon. 3 Types: M-M,M-F,F-F. Length: 20cm. The wire gauge: 24 AWG. Color: multicolored, standard color scheme. 2.54mm pitch headers and socket, proper diameter to fit in the holes of breadboard..
  • Material: Tinned copper is primarily used for protection against oxidation and corrosion, good for soldering. Package: Comes with 3 x 40pin ( M-M, M-F, F-F ) 20cm multicolored jumper wire..
Check Stock

Brio AQUUS TROE600COL Reverse Osmosis Water Filtration System, 4-Stage Tankless RO Water Filter System for Under Sink, 600 GPD, 1.5:1 Pure to Drain, Reduces TDS, Smart Faucet, USA Support, Black

  • NSF/ANSI CERTIFIED FILTRATION: The PCB filter of the Brio AQUUS Reverse Osmosis Water Filtration System has 3 stages—non-woven PP, coconut carbon fiber, and coconut carbon block—and is certified against NSF/ANSI 42 for CTO reduction. The RO membrane, with a pore size of 0.0001 microns, is certified against NSF/ANSI 58 for TDS reduction. Together, these filters significantly reduce sediment, chlorine, iron, TDS, PFAS, atrazine, lead, arsenic, nitrates, fluoride, radium, and more. So, if you’re concerned about the quality of your tap water, you can count on the Brio tankless under sink RO system to produce delicious, reliably purified water for you and your whole family.
  • SPACE-SAVING DESIGN: Sleek and modern, the Brio AQUUS RO system measures 5.2” W x 16.6” H x 18.2” D and takes up approximately 30% of typical under sink space, preserving 70% for storage. The innovative tankless filtration design has an integrated system that’s leak-proof and resists recontamination, a hazard for a reverse osmosis under sink system with a tank.
  • SMART FAUCET WITH 2 FILTRATION OPTIONS: The LED smart faucet features a TDS meter, so you know what the TDS level is in your RO-....
Check Stock

Gikfun Prototype Shield DIY Kit A1 for Arduino Mega 1280 2560 R1 - R3 (Pack of 2pcs) EK1096x2

  • Prototyping Shield Diy Kits. Great for building your own designed Arduino Uno sheilds..
  • You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder..
  • It's got extra connections for all of the Arduino MEGA 1280 / 2560 R1 R2 R3 pins, and it's got space to mount through-hole and surface mount integrated circuits..
  • The Prototyping Shield makes it easy for you to design custom circuits..
  • It's a convenient way to make your custom circuit and Arduino into a single module..
Check Stock

Brio G10-U Reverse Osmosis Water Filtration System, 4-Stage Tankless RO Water Filter System for Under Sink, 500 GPD, 2:1 Pure to Drain, Reduces TDS, Smart Faucet, USA-Based Customer Support, Black

  • NSF/ANSI CERTIFIED FILTRATION: The PCB filter of the Brio G10-U Reverse Osmosis Water Filtration System has 3 stages—non-woven PP, coconut carbon fiber, and coconut carbon block—and is certified against NSF/ANSI 42 for CTO reduction. The RO membrane, with a pore size of 0.0001 microns, is certified against NSF/ANSI 58 for TDS reduction. Together, these filters significantly reduce sediment, chlorine, iron, TDS, PFAS, atrazine, lead, arsenic, nitrates, fluoride, radium, and more. So, if you’re concerned about the quality of your tap water, you can count on the Brio tankless under sink RO system to produce delicious, reliably purified water for you and your whole family.
  • SPACE-SAVING DESIGN: Sleek and modern, the Brio G10-U RO system measures 5.2” W x 16.5” H x 18.2” D and takes up approximately 30% of typical under sink space, preserving 70% for storage. The innovative tankless filtration design has an integrated system that’s leak-proof and resists recontamination, a hazard for a reverse osmosis under sink system with a tank.
  • SMART FAUCET WITH 2 FILTRATION OPTIONS: The LED smart faucet features a TDS meter, so you know what the TDS level is in your RO-....
Check Stock