Categories

Best Pcb Soldering

Handy Flux, 7 Ounce Jar with Brush

  • Function: Soldering electronic components. Anti-oxidation flux. Better welding fluidity. Easy to tin, easy to solder, strong welding..
  • Feature: Non-toxic, no corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface..
  • Application: Soldering flux is suitable for welding on instruments, meters, gold, copper, iron, tin and other metals. Widely used in phone PCB, SMD, SMT patch and appliance repair..
Check Stock

Circuit Specialists | Deluxe PCB Preheater and Desoldering System with Hot Air Gun & Soldering Iron - Home & DIY Electronics - Solder Station Tool Kit

  • Introducing the CSI853B+ PCB preheater and hot air rework station, your ultimate solution to soldering and de-soldering surface mount integrated circuits..
  • Featuring a 1000 watt heater, the CSI853B+ integrates a PCB preheating platform with a hot air re-work and soldering system..
  • This easy-to-operate system is powered by 110 VAC +/- 10% and has a maximum power of 1000 watts (preheater and hot air combined)..
  • With a temperature range of 50-400 deg C (122 to 752 deg F) for the preheater and 100-480 deg C for the hot air, the CSI853B+ is designed for stable and consistent working output..
  • The hot air wand, with 720 watts of power and a maximum flow of 120L/minute, can be hand-held or mounted into the moveable stand for freehand work..
Check Stock

EPLZON Gold Plated PCB Solder-able Breadboard for DIY Electronics Projects Compatible with DIY Arduino Soldering Projects 2.05"x3.5" (5 Pack + 2 Mini Board, Black)

  • ✅This board is especially useful for preserving a prototype or experiment you just created on a solder-less breadboard by soldering all the pieces in place..
  • ✅Suitable for a variety of MCU boards, compatible with Arduino Nano, ESP8266, NodeMCU, etc.
  • suitable for various DIP type components.
  • suitable for any type of Raspberry Pi GPIO breadboard PCB..
  • ✅Gold plated finish to prevent oxidation, high quality gold finish for easy soldering,and all holes are through-plated for mounting strength.
  • ✅5pcs 2.05"x3.5" PCB Solder-able Breadboard + 2pcs 2.0"x1.5" mini PCB Solder-able Breadboard for prototyping and transferring,Black.
  • ✅Lead-free and RoHS compliant for longer shelf life.
Check Stock

RIKON Power Tools 50-151 Belt with 5\ Disc Sander, 1\ x 30\

  • Soldering Kit with Diagonal Wire Cutter - widely used for soldering projects, home DIY soldering, appliance, electrical and electronics repairs, circuit board welding, other fixing jobs, hobby crafts, etc.
  • Premium Quality – high quality solder iron tool, soldering iron stand with sponge, and all other accessories.
  • reliable adjustable soldering iron with heat-resistant cap and grip and with 5pcs soldering iron tips.
  • Bonus Accessories – desoldering pump, tweezers, insulating tapes, solder paste, wire cutter, heat shrink tubing, pen-shaped screwdriver, wires, mini screwdrivers, mini PCB, etc., and a downloadable ebook.
  • Durable and Convenient Carry Bag – the soldering kit for electronics that you wanted for home DIY package comes handy in a durable, easy-to-carry PU bag.
  • keeps all the components organized and easy to transport.
  • Satisfaction Guarantee – every purchase of this solder kit is backed by the manufacturer’s 30-day money-back / replacement guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction.
Check Stock

Delcast 30W Soldering Iron & Tool Kit, Includes 25g Rosin Core Solder (5 Piece Set)

  • This five piece soldering iron kit includes a 30 watt precision tip soldering iron, soldering iron stand, 25g rosin core 63/37 tin lead solder and a metal solder assist tool..
  • Delcast SP-30JY Pencil Tip Soldering Iron is ideal for electronics soldering. The low wattage allows for the soldering of heat sensitive PCB which can be damaged by too high of wattage. It has a comfortable handle, polarized US power plug and replaceable pencil shaped soldering tip..
  • Includes one 12.5g tube each of 0.6mm and 0.8mm rosin core 63/37 tin lead solder wire. Solder is comprised of a eutectic ratio of 63% tin to 37% lead, meaning it has the lowest melting point of any other tin to lead mixtures and a lower melting point than either of the two parts by themselves. It has a true melting point of 183 Celsius / 361.4 Fahrenheit..
Check Stock

ANBES Soldering Iron Kit Electronics, 60W Adjustable Temperature Welding Tool, 5pcs Soldering Tips, Desoldering Pump, Soldering Iron Stand, Tweezers

  • Soldering Iron Support Station: Standard dual spring soldering iron holder with sponge is a very useful tool when the soldering iron work.It has a secure base and it is more safer than any other thin soldering stand.The maximum extent to avoid the user was burned and damaged..
  • Soldering Iron Unique Features: Superior professional soldering iron has 5 multiple tips replacement, Heat and impact resistant design of screw thread so the iron head is not easy to drop.Adjustable Temperature from 200℃-450℃.Heat up fast and work great..
  • Solder Sucker Desoldering Pump: Rugged metal construction,the desoldering pump is high pressure vacuum tube with aluminum body frame, which allows easy one-handed use, best for removing solder from PCB through hole solder joints..
  • Widely Used & Carry Portable: Soldering iron tools widely used for welding circuit board, appliance repair, Home DIY hobbyists,jewelry welding.You can take it anywhere and you will be able to find the tools you need in the carry bag..
  • 14-In-1 Soldering Kit: Soldering iron kit comes with soldering iron,desoldering pump, 5 multiple soldering tips, tin wire tube, soldering iron stand, tweezers, wire stripper cutter, 2 electronic wire..
Check Stock

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

  • Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
  • Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
  • The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
  • PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check Stock

Aven 17010 Adjustable Circuit Board Holder

  • Ideal for clamping PCB, for soldering/desoldering or rework.
  • Retractable to accommodate various board sizes up to 198mm wide and up to 4mm thick.
  • Rubber feet of the base ensure stability.
Check Stock

Aven 17010 Adjustable Circuit Board Holder ESD Safe

  • Ideal for clamping PCB, for soldering/desoldering or rework.
  • Retractable to accommodate various board sizes up to 198mm wide and up to 4mm thick.
  • Rubber feet of the base ensure stability.
Check Stock

HPYNPES DIY Practical Soldering Practice Kit Practice Learning Electronics Training Board

  • Product introduction: Shake the lucky turntable by NE555 and CD4017 chips combined with LED random output function. The control terminals are button control and vibration switch control. You only need to press the button or shake it, the LED will start to rotate, and the After a while it stops randomly, leaving only one LED light..
  • Designed for Beginners：Special design for electronics starter to learn to solder electronics components. Soldering project kit will improve your electronic knowledge and soldering skills in practice.
  • Easy to Assemble： Electronic DIY kits uses safety materials, effectively avoid corrosion and wear out. Components’ names have been marked on the PCB board and the circuit design is simple. Even beginners can easily solder successfully.
  • Warm Reminder ：DIY electronic components kit requires buyer to assemble and welding, If you don't have any soldering experience, please read the soldering instructions and use soldering tools carefully to avoid safety problem.
Check Stock

Soldering Station Helping Hands with Magnifying Glass Third Hand Solder Tool PCB Holder - Heavy Duty Base Plate | Four Flexible Arms

  • ...eavy and Not Easy to Tip Over】The base is made of heavy-duty powder metal steel and weighs about 0.66 lbs, ensuring your welding station won’t tip over and move. Rubber feet protect the tabletop from abrasion..
  • 【Easy Positioning and No Rebound】 The high-quality stainless steel adjustable gooseneck arm on the soldering helping hands can be adjusted at will and not easy to rebound. Four 6.7-inch helping hands allow you to completely free your hands for better repair work..
  • 【Improve Work Accuracy】The soldering station is equipped with a 3x magnifying glass, whick can help you magnify small electronic components, third hand tool can improve your work efficiency and welding accuracy, and you no longer have to be tired of small parts..
  • 【Will Not Scratch The PCB Board】 The alligator clips on pcb holder arm are fixed with screws and can be rotated 360 degrees, and each clip is equipped with an insulating rubber sleeve, which can prevent scratching the circuit of the PCB board and prevent electrical short circuits..
  • 【Customer Satisfaction】Our service tenet is to make you 100% satisfied with our products. If the product does not meet your expectations, please feel free to send us a message via “Contact Seller”, we will handle it for you.
Check Stock

The Warhol Incident (Alexis Parker Book 2)

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock

LDK Soldering Iron Kit Electric 60W 110V Adjustable Temperature Soldering Gun Welding Tools, 5pcs Replacement Tips, 30g 0.8mm Solder Wire, Heavy Duty Holder, Cleaning Sponge, Solder Paste

  • 60W 110V Adjustable Temperature Soldering Iron: Inner-heated ceramic technology makes the soldering kit heat up very quickly (within 2 minutes)..
  • Solder paste is a mixture of minute solder spheres held within a specialized form of solder flux. The fact that it is a paste means that it can be easily applied to the board during PCB assembly..
  • Quality soldering iron stand with cleaning sponge..
  • Professional soldering iron suitable for basic DIY fixes. It would be very satisfactory for the typical electronics hobbyist, maker, tinkerer, or DIY repairs enthusiast..
  • Satisfaction Guarantee: Our soldering kit is backed by our manufacturer 180-day money back guarantee..
Check Stock