Categories

Best Pcie Gen Vertical Gpu Mount

NZXT H710i - CA-H710 i-W1 - ATX Mid Tower PC Gaming Case - Front I/O USB Type-C Port - Quick-Release Tempered Glass Side Panel - Vertical GPU Mount - Integrated RGB Lighting - White/Black

  • NEW FEATURES: Front I/O USB Type-C Port, Vertical GPU Mount, Tempered glass side panel with single screw installation, and upgraded Smart Device V2.
  • SMART DEVICE V2: Includes a faster microprocessor for NZXT CAM-powered control of two RGB lighting channels and three fan channels that support either....
  • VERTICAL GPU MOUNTING: Show off your graphic card with a built-in mounting bracket for installing your GPU vertically *PCIe riser card not included.
  • ENHANCED CABLE MANAGEMENT: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.
  • SPECS: Max GPU Clearance: 413mm, Radiaor Support - Front: 360mm, Top: 360mm, Rear: 140mm.
Check Stock

DiLiVing PCI-E 3.0 X4 to U.2 SFF-8639 NvMe SSD Cable

  • 【FUNCTION】-You can mount the PCIe U.2 drive directly onto the adapter, giving you an easy and convenient way to improve your system performance....
  • 【U.2 SFF-8639 to PCIE】-Turn 2.5 inch U.2 NVME SSD to PCIE 3.0 X4 GEN3, support Intel 750 series, Intel DC P3500/P3600/P3700 and more..
  • 【HIGH SPEED】-Compatible with PCI Express 3.0 x4 lane, Boost system speed and performance, and also Backward Compatible with PCIe 2.0 and PCIe 1.0..
  • 【EASY TO INSTALL】-mount your PCIe U.2 NVMe ssd directly onto the adapter by SFF-8639 slot, and then plug the adapter in your server or the....
  • 【COMPATIBILITY】-Support PCIE Gen3, PCIE Gen2, PCIE Gen1. Supports PCI-E X4/X8/X16 slots..
Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 Z690 Tested] Shielded Gaming PCI Express Gen4 Reverse PCIE Connector w/ 270 Degree Socket {24cm} Compatible with NZXT H1 Without Screw

  • Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount.
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
  • Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases..
  • 【ULTRA PCIE4.0 Right Angle-25cm: B08XMZ788Y】 【ULTRA PCIE4.0 Left Angle-15cm: B0964B4G2S】 【ULTRA PCIE4.0 Straight-15cm: B08YZ676LX】 【ULTRA PCIE4.0 Reverse GPU-25cm: B092JTY73B】 【ULTRA PCIE4.0 Dual Reverse-20cm: B092JSJ5NY】.
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- White

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Check Stock

LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX3090 RX6900XT x570 B550 Z690 Tested] Shielded Extreme High-Speed Vertical Mount Gaming PCI Express Gen4┃Universal 90 Degree Socket{20cm} 3.0 Gen3 Compatible

  • Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount..
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity..
  • Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases..
  • 【ULTRA PCIE4.0 Right Angle-25cm: B08XMZ788Y】 【ULTRA PCIE4.0 Left Angle-15cm: B0964B4G2S】 【ULTRA PCIE4.0 Straight-15cm: B08YZ676LX】 【ULTRA PCIE4.0 Reverse GPU-25cm: B092JTY73B】 【ULTRA PCIE4.0 Dual Reverse-20cm: B092JSJ5NY】.
Check Stock

MSI MPG Velox 100R - Mid-Tower Gaming PC Case - Tempered Glass Side Panel - 4 x 120mm ARGB Fans - Liquid Cooling Support up to 360mm Radiator - Mesh Panel for Optimized Airflow

  • TEMPERED GLASS FRONT PANEL - The front panel consists of tempered glass that can clearly showcase the fans’ ARGB lighting without any obstruction..
  • ARGB SHOWROOM - Create your own ARGB battle station with the MPG VELOX 100 Series, fully supported by MSI Mystic Light..
  • VERTICAL GPU MOUNT - A vertical GPU bracket is included as an accessory that allows you to mount your graphics card vertically..
  • SIDE AIR VENTS - An additional side air vent can support up to 2 fans / 240mm radiator..
  • USB TYPE-C SUPPORT - Synergize the MPG VELOX 100 Series with a MSI motherboard by bridging a USB Gen2 Type-C port with 10 Gbps for convenient access..
  • BIG VOLUME - The MPG VELOX 100 Series provides excellent components clearance, capable of having 1 x 360mm radiator/3 x 120mm fans on both the top and the front..
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- White

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
Check Stock

QNAP TS-873A-8G 8 Bay High-Performance NAS with 2 x 2.5GbE Ports and Two PCIe Gen3 Slots

  • AMD Ryzen Embedded V1500B quad-core 2.2 GHz processor.
  • 2 x 2.5 Gigabit Ethernet Port (2.5G/1G/100M).
  • Supports entry-level NVIDIA graphics cards for video processing or GPU-passthrough to VMs.
  • Supports QTS and QuTS hero dual operating system.
Check Stock

QNAP TS-673A-8G 6 Bay High-Performance NAS with 2 x 2.5GbE Ports and Two PCIe Gen3 Slots

  • AMD Ryzen Embedded V1500B quad-core 2.2 GHz processor.
  • 2 x 2.5 Gigabit Ethernet Port (2.5G/1G/100M).
  • Supports entry-level NVIDIA graphics cards for video processing or GPU-passthrough to VMs.
  • Supports QTS and QuTS hero dual operating system.
Check Stock

EZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black

  • Vertical GPU Bracket with RGB LED effects, Synchronizable RGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 pin RGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Vertically display a GPU graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler..
  • Designed for most ATX case with at least 7 PCIE slots in the market.
  • The 20cm/7.8in PCIE riser with high quality TPE cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance. Only supports PCIE 3.0.
  • With movable bracket, More flexible in using PC case interior space. NOTE: Please check your case with enough space.
Check Stock

INLAND Professional 256GB M.2 NVME SSD + Intel Core i9-11900K Desktop Processor Bundle with MSI Z590 PRO WiFi ATX Motherboard PCIe 4 M.2

  • Intel Core i9-11900K Desktop Processor. 8 Cores 16 Threads.
  • LGA 1200 Sockets Supported, a fan or heat sink not included, compatible with Intel 500 series & select Intel 400 series chipset based motherboards.
  • PCIe Gen 4.0 Support, Max # of PCI Express Lanes: 20, CPU Support Maximum Memory Capacity 128 GB, DDR4-3200 MHz, No ECC memory, up to 2 memory channel, 50 GB/s max memory bandwidth. Built-in Intel UHD Graphics 750, Intel Optane Memory Supported, Thermal Solution Specification PCG 2019A.
  • MSI Z590 PRO WiFi ProSeries Motherboard. Supports 11th and 10th Gen Intel Core/Pentium/Celeron processors for LGA 1200 Socket.
  • Supports DDR4 Memory, up to 5333(OC) MHz.
  • 4x DDR4 memory slots, support up to 128GB.
  • PCIe 4.0, Lightning Gen4 x4 M.2 with M.2 Shield Frozr.
  • Extended Heatsink Design and M.2 Shield Frozr are built for high performance system and non-stop works.
  • 2.5G LAN with LAN Manager and Intel Wi-Fi 6E Solution.
  • Audio Boost: Reward your ears with studio grade sound quality.
  • Multi-GPU: With Steel armor PCI-E slots. Supports 2-Way AMD Crossfire.
Check Stock

EZDIY-FAB Vertical Graphics Card Holder Bracket Support with Multi-Angle,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- White

  • The adjustable GPU bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud..
  • The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud.
  • The latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm. Only support PCIE3.0.
  • White color metal vertical mount fits white case perfectly..
  • For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling. NOTE:Before buying, please confirm whether there is enough space inside the chassis to install.
Check Stock