Categories

Best Pcm Solution

Gustard R26 Discrete R2R DAC - R2R+1Bit XMOS DSD512 PCM768kHz LDAC Balanced K2 Clock Decoder with Remote Control(Sliver)

  • Dual architecture: Independent R2R 1Bit,support native PCM native DSD and DSD to PCM..
  • PCM NOS: Without any digital signal processing,bypassing the volume adjustment,raw PCM stream was decoded by the R2R array directly..
  • Native 1Bit DAC,support DSD 512 (via USB)and DSD 1024 (via IIS).The DSD stream decoded by the independent 1 bit convertor without DSD to PCM converting. *Volume is fixed under this mode..
  • Streamer/Renderer: Support roon,upnp and more protocols in the future..
  • Replace the input signal's clock with precision oscillators (local or external). Interference from the input source's clock is avoided..
Check Stock

4K HDMI to Optical Audio Converter + HDMI PCM 5.1 7.1 to Analog Surround Decoder

  • Great digital to analog audio decoder solution for transcoding uncompressed digital LPCM 7.1 or 5.1 channel sound into analog surround format for existing analog amplifier or receiver. Extract compressed digital Bitstream audio such as Dolby Digital, AC3 and DTS 5.1/7.1 embedded in HDMI feed and output through its optical audio output for further decoding by downstream device. Supports uncompressed LPCM 7.1, LPCM 5.1 and PCM in analog output through the multi-channel 3.5 output ports..
  • Deliver 7.1 and 5.1 discrete channels through its front left/right, center/subwoofer, rear left/right and rear center left/right channel to deliver a directional and more realistic effect Supports compressed audio such as Dolby Digital, AC3, DTS 5.1 and PCM 2CH through optical audio output. Easy EDID dip switch selection so users can easily control their HDMI source to send the desired digital audio format for decoding or conversion..
  • No HDMI output with TV is required when receiving audio at the analog or optical audio output. Supports all HDTV resolutions including 4K, 2K, 1080p, 1080i, 720p, 576p and 480p. Output resolution follows input. Fully compliant with HDMI 1.3, HDCP 1.2 and DVI 1.1 standards..
  • Supports HDMI audio sampling rates up to 192 kHz. Supports optical (....
Check Stock

ROOFULL 192Khz Digital-to-Analog Audio Converter DAC Digital SPDIF Optical (Toslink) to Analog L/R RCA & 3.5mm AUX Stereo Audio Adapter with Optical & Coaxial Cable for PS3/4 DVD HDTV Headphone

  • 【Digital-to-Analog】Simple solution to convert digital coaxial or optical audio to 3.5mm jack or RCA L/R analog audio signal (not capable of being reversed).
  • 【Plug and play】Optical or digital coaxial audio output from your source devices (such as HDTV) to this converter, then RCA L/R or 3.5mm AUX to your headphone or stereo speaker (Please set PCM/LPCM audio when using).
  • 【Simple Settings】Just set the audio format to uncompressed 2-channel LPCM or PCM in your TV or other source devices. Sampling rate support 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz 24-bit.
  • 【Durable Quality】Heavy-duty aluminum alloy enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation.
  • 【100% Satisfaction Guarantee】Years of experience in audio & video products allows us to have the ability to provide you with premium quality products and professional support services. If you have any questions before or after purchase, please feel free to reach out to us on Amazon or Google, 100% satisfaction guarantee!.
Check Stock

BluDento True Hi-Fi aptX HD LDAC Bluetooth 5.0 Music Receiver Long Range, Built-in Burr Brown DAC, for Streaming Audio to Any A/V Receiver, Powered Speaker, Amplifier

  • ...HD is HiFi Bluetooth DAC Receiver supports aptX HD which can stream high quality music from Bluetooth enabled cellphone, pc or tablet to any of your home stereo systems. Plug and Play, super easy to use..
  • ✅ Bluetooth Version 5.0: BluDento Bluetooth DAC is featuring Bluetooth v5.0 CSR8675 chipset which is a premium solution delivering high quality wireless audio performance and supporting for LDAC, aptX HD, aptX Low Latency, aptX, AAC and SBC decoding..
  • ✅ Audiophile Grade DAC: Features TI PCM5102A DAC which is a high performance 32bit / 384kHz PCM data, 2CH audio D/A converter targeted for audiophile grade portable applications, a high level that will satisfy the most demanding audio enthusiasts. 2.1VRMS MAX RCA output level..
  • ✅ Enhanced Long Range: Utilizing CLASS 1 Bluetooth technology and designed with external gain antenna. BluDento Bluetooth DAC Receiver can achieve a range of up to 100ft. Kindly be noted that Operation Range can be affected by many factors such as physical obstructions like walls, metal obstacles. And also depended on Bluetooth source devices..
  • ✅ Flexible Output Connectivity: Supports both analog ( L/R RCA / 3.5MM AUX ) and digital ( Optical TOSLINK + SPDIF Coaxial ) outputs, provides wide compatibility with your existing st....
Check Stock

Michigan Motorsports Knock Sensor Adapter for 1997-2004 LS1 LS6 Car to LS2 LS3 Knock Sensor

  • Knock Sensor Adapter for 1997-2004 LS1 Car to LS2 Knock Sensor.
  • This harness allows the dual-wire LS2 knock sensors located on side of the LS2 engine block to be plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Compatible with the PCM harness in LS1 Corvette and F-Body cars..
  • PLEASE NOTE THAT IN ORDER TO USE LS2 KNOCK SENSORS IN A LS1 CAR YOU REQUIRE SPECIAL LS1 PCM SOFTWARE CHANGES OR A LS2 PCM..
  • KEY FEATURES: Fully Plug and Play with the factory harness & sensors Military spec. high-temperature Teflon wire (same type used on oxygen sensors) 24" Length High-temperature (1200F) heat treated protective loom All connections crimped using our computerized crimp-quality monitoring system and then circuit checked for the utmost in reliability..
Check Stock

OREI Digital to Analog Audio Converter - Optical SPDIF/Coaxial to RCA L/R with 3.5mm Jack Support Headphone/Speaker Output DA21

  • Converts coaxial or optical digital audio input to analog stereo output over RCA and 3.5mm mini jack. Will not convert Dolby Digital Signal. Make sure to change to TV Output To PCM.
  • Supports all popular sample rates including 32kHz, 44.1kHz, 48kHz, 96kHz and 192kHz, at up to 24-bit resolution.
  • This Device will not convert Dolby Sound. It is only a converter not a Decoder. So make sure your device does not require Dolby conversion..
  • TROUBLE SHOOT - If your getting a Clicking Sound - Most likely your TV output is not set to PCM. Please change it PCM. Or if your getting Screeching or No Sound - Most likely you are trying to decode Dolby Sound to Analog. You will need a DA34 or DA34X.
  • INCLUDES DA21 Converter, Power supply, User Manual.
  • KINDLY NOTE : The DA21 will only support PCM audio output mode.It doesn't support Dolby, DTS, 5.1ch or 7.1 ch audio signals..
Check Stock

HiFi DAC+Sound Card Pifi DAC + PCM5122 DAC I2S Interface Analogue Output Signal Digital Audio Card Compatible with Raspberry Pi B + a + 2B Raspberry Pi 3B (64-bit)

  • Good performance: PCM5122 integrates a negative charge pump, and the output does not require a DC blocking capacitor.
  • very good ability to suppress noise in the frequency band. Since the load support is as low as 1K, PCM510xA can drive a variety of parallel products..
  • Ensure the continuity of signal impedance: Sound card Pifi DAC’s gold-plated RCV double clip and gold-plated 3.5 mm jack socket (recommended by amplifier). It is perfectly compatible with the official PI HAT size of the Raspberry Pi, based on the high gold plating process of the circuit board, and the arc line (high-end HIFI DAC adopts the arc line), which better guarantees the continuity of signal impedance and reduces signal reflection and refraction..
  • Pifi DAC + PCM5122 DAC: Pifi DAC + PCM5122 DAC, I2S interface, analog output signal, compatible with Raspberry Pi B + a + 2B Raspberry Pi 3B (64 bit). Provide infrared receiving interface..
  • Get rid of the current sound: The RPI+DAC HiFi kit uses an insulated power supply design to isolate the Raspberry Pi nutrition from the DAC part of the independent power supply, and the beads do not interfere with each other, and get rid of the sound of electric current. With this RPI+DAC HiFi kit, you can easily get m....
Check Stock

4K@60HZ HDMI Audio Extractor, HDMI 2.0b Audio Splitter Converter, HDMI to HDMI + Optical Toslink SPDIF + 3.5mm Stereo Audio with Control Output Analog Volume Knob Compatible for PS5/4/3/Blu-ray player

  • ... product is an HDMI extractor and HDMI splitter with control output analog volume knob, you can control HDMI extractor volume. Note: This unit does not support the ARC function..
  • 3 AUDIO MODE SETINGS- HDMI audio extractor splitter have Pass, 2.0CH, 5.1CH 3 kinds of audio mode options. 3.5mm audio output supports 2CH PCM LPCM stereo audio.
  • Optical SPDIF output supports 2CH PCM, 5.1CH Dobly Digital, Dobly TrueHD, DTS-HD, DTS.(Please set audio format on HDMI Source to PCM/ LPCM format to use If your device can't support these formats)PCM Setting Path: Device homepage -- system setting -- image and sound -- voice setting -- digital audio output -- PCM..
  • WIDE COMPATIBILITY- HDMI to Optical Audio Adapter suitable for various HDMI source devices to meet different needs. HDMI input: Blu-ray/ DVD/ HD player, cable/satellite box, Fire TV, Apple TV, PS3/PS4/PS5, Xbox, PC/laptop, HD camera, HD DVR etc. HDMI Output: Full HD TV, Monitor, Projector. Audio format: Speaker, Amplifier, Soundbar, D-o-l-b-y Digital, Dobly TrueHD, PCM 5.1/2.0.(Not suitable for passive speakers，An amplifier is required for use with this speaker).
Check Stock

S.M.S.L SU-6 DAC ES9038Q2M XMOS DSD PCM768kHz/32Bit Bluetooth 5.0 LDAC USB Decoder (Black)

  • Qualcomm latest Bluetooth chip supports LDAC 24bit/96kHz, APTX/HD, SBC, AAC.
  • The 2nd generation XMOS solution supports DoP256 and native DSD512, and PCM supports up to 32bit/768kHz.
  • 4x high-end dual op-amp OPA1612 and a large number of audio grade components.
  • All input ports (except Bluetooth) support DSD transmission, coaxial and optical supports DoP64.
  • Built-in discrete component linear power supply and multiple low-noise power supplies for analog circuits.
Check Stock

Techniche Hybrid Elite Sport Cooling Vest, Gender: Mens/Unisex, Primary Color: Blue, Size: XL, Distinct Name: Blue 4531BLXL

  • Front zipper with mesh ventilation panels and scoop neck.
  • Comfortable, quilted nylon outer with Hyperkewl cooling fabric inner, waterrepellent nylon liner, and black cottonpoly elastic trim.
  • Hybrid cooling solution for ultimate relief.
  • Used by Factory compatible with Honda and compatible with KTM GP teams as well as McLaren and F1 teams in order to maintain cool body temperature before competing.
  • Evaporative cooling Hyperkewl cooling fabric provides 5-10 hours of cooling relief per soaking.
  • CoolPax PCM inserts maintain a comfortable 59F for up to three hours.
Check Stock

RME ADI-2 DAC FS Ultra-Fidelity PCM/DSD DA Converter with AKG K240 Studio Pro Headphones & 10-Pack Straps Bundle

  • ...ding, and Depop for PCM & DSD. Besides, utilizing Streamer/Renderer, an easy access to high-quality online streams, the GUSTARD A26 can supports Roon /UPnP /HQ Player NAA at present, and there will be more protocols in the future..
  • Clock Synthetization & XMOS XU216 Solution ▶️ Equipped with K2, ultra-low noise clock synthesizer, the A26 DAC features a precision clock from local oscillators or external clock in. It is worth mentioning that the GUSTARD A26 can replace the input signal' s clock with precision oscillators (local or external) and avoid the interference from the input source' s clock. In addition, the A26 DAC applies XU216 from XMOS, supporting up to PCM768 (with MQA-support) and DSD512..
  • LPF Discrete Circuits Design ▶️ LPF is specifically designed for the AK4499EX using discrete devices, whose final parameters of the circuit are adjusted with subjective listening. Different from ICs, these discrete circuits provide the possibilities to control every detail in sound and performance. However, these parasitic effects would introduce huge challenges to development experience and device's quality..
Check Stock

S.M.S.L M200 Uses AK4497EQ Chip,Support UAT/aptX-HD/AAC/SBC High-Resolution Bluetooth 5.0 Audio DAC

  • The unit uses AKM's flagship DAC chip the AK4497, with a well-designed circuit that delivers an unprecedented 0.00015% (-116dB) distortion!.
  • The 2nd XMOS solution, PCM supports up to 32bit/768kHz, and DSD supports up to DSD512, custom driver for Native DSD ..
  • Bluetooth 5.0 digital audio input, support APT-X, external antenna, transmission distance is farther..
  • 6 digital filter modes and 3 sound color selection..
  • DSD Volume Bypass , DSD is the original music without any treatment..
Check Stock

Insignia Optical/Coaxial Digital-to-Analog Converter – Black

  • PROZOR 192KHz Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( not capable of being reversed).
  • Input Audio Connector: 1 x Toslink, 1 x RCA (Coaxial).
  • Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack.
  • Powered by 5.5mm USB Power Cable (Power Adapter is NOT Included).
  • Do Not Use Other Plugs, It Can Only Use 5V 1A Plug.
  • Up to 192KHz/24bit: Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz.
  • 24bit S/ PDIF Incoming Bit Stream on Left and Right Channels.
  • Supports Uncompressed 2 channel LPCM or PCM Digital Audio Signal Output.
  • Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM）.
  • Can be Used for PS3, PS4, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc.
Check Stock