Best Pcmcia Sata Card

Hikig PCMCIA Convert to SD/SDHC Card Adaptor for Mercedes Benz C E S GLK CLS Class COMAND APS System with PCMCIA Slot Support 32GB SDHC PCMCIA Adapter Only

• PCMCIA to SD / SDHC Card Adapter for Mercedes-Benz with a PCMCIA Slot.
• PCMCIA Multi Card Reader Adaptor B67823974 for Mercedes Benz Comand APS.
• No more CDs,Free MP3,Free Media for Your Car Audio System!.
• Support for Mercedes Benz C, E, S, GLK, CLS Class COMAND APS System.

Transcend PCMCIA Ata Adapter for Cf 2 Card

• Converts 50-pin CompactFlash card to 68-pin PCMCIA.
• Fully compatible with Type I CompactFlash cards.
• Fast read and write to a CompactFlash card via any PC card slot.
• Operating System-Microsoft Windows 7, 8, 10, Mac OS X 10.0 or later and Linux Kernel 2.6.30 or later.

PCMCIA to SD Reader Card PC Adapter Supoort SDHC for Mercedes-Benz

• PC adapter card for CompactFlash memory cards.

32MB PCMCIA ATA Flash Card (p/n ATA-32MB-MT)

• 32MB PCMCIA ATA Flash Card (p/n ATA-32MB-MT).
• - Data is not lost when power is turned off..
• - This card works with several Roland samplers as well..
• - This ATA-32GB-MT carries a Gigaram lifetime warranty.

Adaptec RAID 71605 Storage Controller 2274400-R

• ▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
• ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
• ▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
• ▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
• ▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.

smartelf PCIe X1 SATA III Card 6 Ports ASM1166 Chip, SATA 3.0 6Gbps PCIE Controller Expansion Card Adapter with 6 SATA Cables+Thin Bracket,Non Raid

• [ PCIe 6-Ports SATA 3.0 Expansion Card ] The 6-port SATA control card based on ASM1166 chip, It can add six SATA 3.0 devices （The max transport speed can reach 6Gbps ).Backward compatible with SATA 1.0 and SATA 2.0..
• [ Wide Compatibility ] Our 6-port PCIE 1X SATA 3.0 card are suitable for PCIe X1/X4/X8/X16 card slots.
• it is compatible with multiple operating systems such as Windows/ 8/10/synology/Ubuntu/Linux, and suitable for 99% of the case size on the market..
• [ High Quality PCIe SATA Card ] This 6-port PCIe SATA III controller card is non-RAID and data can be protected by the operating system. High-performance heat sink, can withstand high temperature for a long time. High-quality slots and chips increase the durability and stability of this card. The 3 upgraded FP solid capacitors make the power supply more reliable and safe..
• [ Support ACHI 1.0 Mode ] When your PC’s SSD/HDD is in AHCI boot mode, you can directly insert the hard drive into this sata card, no driver needed, just plug and play.(Note: please make sure that the PC’s SSD/HDD is in AHCI boot mode, otherwise a blue screen will be reported.).
• [ What You Get ] 1* PCIe to SATA III 6-port expansion card.

ASM1166 PCIe X1 SATA Card 6 Ports, Non Raid, Joylifeboard PCIE SATA III Controller Expansion Card 6 Gbps, Support 6 SATA 3.0 Devices, PCIe SATA Card with 6 SATA Cables+Thin Bracket

• ✿【6 Ports PCIe to SATA 3.0 Expansion Card】: Six SATA 3.0 devices can be added to this PCIE 4X to SATA 3.0 card, a simple and stable solution to expand your sata storage by 6x, compliant with SATA 3 max speed 6Gbps, SATA 2 (3Gbps), SATA 1 (1.5Gbps)..
• ✿【Wide Compatibility】: This 6 Port PCIE 1X SATA card works on PCIe X1/X4/X8/X16 card slots, improve the stability and compatibility of the card.The SATA Card with 2 size profile brackets supports WinXP/7/8/10, Linux,MacOS ,Ubuntu,Synology,NAS,etc, perfect for IPFS mining rig..
• ✿【Easy to Install】: Support ACHI 1.0 mode, If the PCs SSD/HDD in AHCI boot up mode, you can insert the hard drive into this sata card directly. No need driver, plug and play. This 6-port PCIe SATA III Controller Card is non raid, data can be protected by OS..
• ✿【High Performance】: Super heatsink is long-lasting high temperature resistance. 3 solid capacitors can improve the stability of the supply. Support switch based on porter FIS or switch based on command.Chip: ASMedia+ASM1166.
• ✅【Warm Service】: 6 Indicator LEDs for each SATA channel show which HDD is active and working properly. We are committed to providing high-quality product quality and sales services. Any problem please feel free to contact us, we w....

Padarsey 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD

• 【SATA III 1 to 5】SATA3.0 1 to 5 expansion card supports 6-port 6.0Gbps SATA III interface. This expansion card requires the motherboard or expansion card support point (SATA Interface Multiplier) to recognize 5 hard drives. Normal motherboard SATA does not support this function. If not, only one hard disk can be recognized..
• 【High Performance】SATA III PHY output swing control and automatic impedance calibration. Plug in the SATA or DC2.5 power cord to charge the expansion card. Plug the SATA input cable into the motherboard or expansion card to charge the SATA..
• 【Meet The Specification】The SATA3.0 expansion card complies with the Serial ATA Port Multiplier specification, the serial ATA port selector specification, the ATA PHY series electrical specification revision 1.0, and the accessory specification ATA series high-speed serialization..
• 【Support Function】SATA3.0 card supports spread spectrum clock, asynchronous signal recovery, partial/sleep power saving mode, BIST and Loopback mode, interleaved rotation (optional), supports hot swap, asynchronous notification, ATAP driver, SWIT based on order and Fi..
• 【100% Guarantee】If you have any questions about our products while using them, please feel free to contact our 24/7 customer servic....

SATA Card 4 Port with 4 SATA Cables, 6 Gbps SATA 3.0 Controller PCI Express Expression Card with Low Profile Bracket Support 4 SATA 3.0 Devices

• ▶【10 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 10 SATA 3.0 interfaces and supports the simultaneous connection of 10 SATA hard disks, the transfer speeds up to 6Gbps.
• ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, can be used on PCIe X4/X8/X16 card slots, compatible with most size chassis on the market.
• ▶【80TB Expansion】: 10 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1166 Chipset, improve this card more stable and compatible.
• ▶【Supports RAID Mode】: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux.
• ▶【What You Get】 : 1 x PCIe to SATA 3.0 10-port controller card, 10 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.

PCIe x1 SATA Card 6 Port, SATA 3.0 Controller Expansion Card with 6 SATA Cables & Low Profile Bracket,SATA III PCIE Gen3 Adapter(6Gbps) ASM1166 Chip, Plug and Play on Windows, MAC OS, Linux System

• ✅【PCIe to SATA 3.0 6 Ports Expansion Card】The pci express sata 3.0 controller card which each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage.Our PCIE 3.0 X1 interface expansion card allows you add AHCI Boot HDD/SSD on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS)..
• ✅【High Performance PCIe SATA Card 】The 6-port SATA controller card based on ASM1166 chip offers more stable, with heat sink, long-lasting high temperature resistance.The high-quality slots and chip can improve the durability and stability of this card, at the same time, it equipped with 3 upgraded FP solid capacitors which reliable and safe power delivery..
• ✅【Wide Compatibility】Our PCIe to SATA III 6-port expansion card auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0, compatity with PCIe x1, x4, x8, x16 and support system: Windows XP / 7/8/10 / Linux,compatible with 99% size chassis on the market.Easy to install, plug and play..
• ✅【What You Get】 1 x PCI Express 6 Ports 1X Card , 6 x SATA cable, 1 x Use Manual, 1 x Low profile Bracket.We provides you with a complete set of perfect match. Note: This SATA card was set on AHCI Boot mode, make sure now PCs SSD/HDD in AHCI Boot Up mode or w....

Qphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166

• [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
• [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
• [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
• [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
• [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.

TRENDnet Gigabit PC Card Card TEG-PCBUSR

PCMCIA to SD Card Memory Card Adapter SDHC to PC Card Converter Reader for Mercedes Benz S, E, C, GLK, CLS Class COMAND APS System Media Player

• This PCMCIA Adapter for for Mercedes Benz Class S Series: before 2010.
• Support standard SD card and SDHC card, Class 10 SD/SDHC Card is recommended. Capacity support UP to 32GB SDHC memory card..
• How to use: format the SD card into FAT32 before use, copy MP3 files to the SD card..