Categories

Best Pe Foam Tape

3 Rolls Double Sided Foam Tape PE Roll Foam Tape Double Faced Sponge Adhesive Mounting Tape (White, 1/8 Inch by 50 Feet)

  • Product feature: the foam tape have strong adhesion, anti-ultraviolet, temperature, water, solvent, and rub resistant, shockproof and sealing.
  • Suitable occasions: the double sides of this double sided foam tape is sticky, easy to stick and tear, good choice for home, office, garden, workshop, such as photo frame, nameplates, signs, doors and windows decoration and so on.
  • Package contains: you will get 3 rolls double sided foam adhesive tapes, which are easy to tear, and can meet your needs.
  • Quality material: the foam mounting tape is made of PE foam, double sides of it have strong adhesion, and the surface is covered with a layer of release paper, suitable for pasting fastening light and small objects.
  • Proper size: the foam tape is 1/8 inch/ 3 mm in width and 1/16 inch/ 1.5 mm in thickness, and each roll is approx. 50 feet/ 15 m in length.
  • Quantity: 3 rolls, totally 150 feet foam tape.
Check Stock

3M 5952/BLK02515 Scotch 5952 VHB Tape: 1/4" x 36 yd, Black

  • 3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. It comes on a red film release liner..
  • 3M 5952 double-sided tape (heavy-duty 45-mil) gives you the simplicity and ease of a tape fastener and is perfect for many indoor and outdoor bonding applications. 3M double-sided tape (automotive, heavy-duty applications) can, in many cases, replace liquid adhesives, rivets, spot welds, and other permanent fasteners..
  • Note: It is recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load. Rough surfaces may require additional tape..
  • Carrier/Backing: closed-cell acrylic foam. Adhesive: modified acrylic. Release Liner: red PE film. Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)..
  • Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 90 pounds per inch (longitudinal). Service/Operating Temperature: up to 250F. Application Temperature: 50F to 100F. Core: 3-inch diameter..
Check Stock

REDIAMANT A + + Car Molding Emblem Tape Automotive Double Sided Heavy Duty Extreme Super Strong Sticky Auto Attachment Waterproof Weatherproof Wearherstrip Adhesive Mounting Exterior Interior

  • ...erproof, weatherproof, extreme super strong glue self adhesive and odorless..
  • ★ [Strong & Heavy Duty on Steel] ★ - Two way tape double sided heavy duty automobile emblem is best adhesion on steel industrial standard attachment tape strip with double-sided rubber pe foam both sides. Average weight 5.5lbs. Automotive bonding attachment heavy dutymounting two way tape for car vehicle truck deco, body trim emblem, side door trimming, windows louver, car badges and logos, car spoiler. It sticks on steel (best adhesion), plastic, aluminum, brick wall, acrylic, glass etc..
  • ★ [Heat proof 100°C/ 212°F & Waterproof] ★ - 2 way mounting tape two sided automotive emblem tape is high temp weatherproof extreme strong stick standing water, heat resistance up to 100 °C/ 212 °F. It's suitable in hot, cold weather, raining, summer season. Double-sided mounting tape automotive is 2 sided heavy dutymounting grade, waterproof, melt resistant, extreme highstrength self adhesive for indoor, outdoor decoration, car, truck moulding trimming stick permanent interior and exterior..
  • ★ [High Quality] ★ - Our two face tape black d....
Check Stock

24mm Car Molding Emblem Tape Automotive Double Sided Heavy Duty by Rediamant Extreme Super Strong Sticky Auto Attachment Waterproof Weatherproof Wearherstrip Adhesive Mounting Exterior Interior

  • ...erproof, weatherproof, extreme super strong glue self adhesive and odorless..
  • ★ [Strong & Heavy Duty on Steel] ★ - Two way tape double sided heavy duty automobile emblem is best adhesion on steel industrial standard attachment tape strip with double-sided rubber pe foam both sides. Average weight 5.5lbs. Other than automotive bonding attachment heavy dutymounting two way tape for car vehicle, truck deco, body trim, emblem, dashboard, windows, fender, sides mirror, nameplate, rim. It sticks on steel (best adhesion), plastic, aluminum, brick wall, acrylic, glass etc..
  • ★ [Heat proof 100°C/ 212°F & Waterproof] ★ - 2 way mounting tape two sided automotive emblem tape is high temp weatherproof extreme strong stick standing water, heat resistance up to 100 °C/ 212 °F. It's suitable in hot, cold weather, raining, summer season. Double-sided mounting tape automotive is 2 sided heavy dutymounting grade, waterproof, melt resistant, extreme highstrength self adhesive for indoor, outdoor decoration, car, truck molding trimming stick permanent interior and exterior..
  • ★ [High Quality] ★ - Our two face tape black do....
Check Stock

12mm Car Molding Emblem Tape Automotive Double Sided Heavy Duty by Rediamant Extreme Super Strong Sticky Auto Attachment Waterproof Weatherproof Wearherstrip Adhesive Mounting Exterior Interior

  • ...erproof, weatherproof, extreme super strong glue self adhesive and odorless..
  • ★ [Strong & Heavy Duty on Steel] ★ - Two way tape double sided heavy duty automobile emblem is best adhesion on steel industrial standard attachment tape strip with double-sided rubber pe foam both sides. Average weight 5.5lbs. Other than automotive bonding attachment heavy dutymounting two way tape for car vehicle, truck deco, body trim, emblem, dashboard, windows, fender, sides mirror, nameplate, rim. It sticks on steel (best adhesion), plastic, aluminum, brick wall, acrylic, glass etc..
  • ★ [Heat proof 100°C/ 212°F & Waterproof] ★ - 2 way mounting tape two sided automotive emblem tape is high temp weatherproof extreme strong stick standing water, heat resistance up to 100 °C/ 212 °F. It's suitable in hot, cold weather, raining, summer season. Double-sided mounting tape automotive is 2 sided heavy dutymounting grade, waterproof, melt resistant, extreme highstrength self adhesive for indoor, outdoor decoration, car, truck molding trimming stick permanent interior and exterior..
  • ★ [High Quality] ★ - Our two face tape black do....
Check Stock

3M 4611/GRY136 Scotch 4611 VHB Tape: 1" x 36 yd, Dark Gray

  • 3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
  • 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) ....
Check Stock

3M 4611/DGRAY0755 Scotch 4611 VHB Tape: 3/4" x 15 ft, Dark Gray

  • 3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
  • 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) ....
Check Stock

3M 5958FR/BLK055 Scotch 5958FR VHB Tape: 1/2" x 15 ft, Black

  • 3M 5958FR VHB Tape is a flame retardant, very conformable, double-sided, pressure-sensitive, closed-cell acrylic foam tape with a PE film release liner. It bonds high, medium and medium/low surface energy substrates and provides handling convenience, cushioning, damping, and impact resistance..
  • Great for industries like aerospace where flame redundancy is often a requirement. It is part of the 3M 5952 family of VHB products which providing adhesion to the broadest range of substrates, including most powder coated paints..
  • Carrier/Backing: closed-cell acrylic foam (conformable). Adhesive: modified acrylic. Release Liner: red PE film (printed). Thickness: 45 mils (carrier, adhesive, liner) 40 mils (carrier, adhesive) 5 mils (liner)..
  • Adhesion: 320 ounces per inch (to stainless steel test panel). Tensile Strength: 100 pounds per inch (longitudinal). Service/Operating Temperature: up to 200F. Application Temperature: 50F (minimum)..
  • Density: 50 pounds per cubic foot. Dynamic Overlap Shear: 100 pounds per square inch. Short Term Temperature Resistance: up to 300F. Standards Met: FAR 25.853 (a) 12 second vertical burn, Appendix F, Part I (a)(ii).
  • Toxicity (Draeger Tube ABD0031, AITM 3.0005. Core: 3-inch diameter..
Check Stock

Spectape ST501 Double Sided Adhesive Tape, 36 yds Length x 1\ Width Paper

  • JVCC DC-WGT-01 Window Glazing Tape is a double-sided PE foam tape that is designed specifically for window glazing and is American Architectural Manufacturers Association (AAMA) certified..
  • Glazing tape is typically used during the installation process to prevent wind and water from entering by creating the inside seal between the insulated glass panel and the window sash/box. Other uses include mounting of emblems, nameplates, plastic strips and mirrors..
  • The foam used for JVCC DC-WGT-01 Window Glazing Tape is a high performance closed cell cross-linked polyethylene which is coated on both sides with a high-performance solvent-based acrylic adhesive. The adhesive system is formulated to bond with glass, wood, and aluminum substrates with quick stick, high peel adhesion, and very good strength. Glazing tape is a cleaner and more convenient option over glazing putty and other messy or more difficult to apply products..
  • JVCC DC-WGT-01 double-sided window glazing tape has outstanding resistance to weather needed for outdoor applications. It has a superior seal against dust and moisture due to its flexible, soft foam. The easy-peel poly liner allows for continuous and complete liner removal during window glazing applications (creating the seal between the i....
Check Stock

JVCC DC-WGT-01 Double Coated Window Glazing Tape: 1/16 in. Thick x 3/8 in. x 50 yds. (White)

  • JVCC DC-WGT-01 Window Glazing Tape is a double-sided PE foam tape which is designed specifically for window glazing and is American Architectural Manufacturers Association (AAMA) certified..
  • Glazing tape is typically used during the installation process to prevent wind and water from entering by creating the inside seal between the insulated glass panel and the window sash/box. Other uses include mounting of emblems, nameplates, plastic strips and mirrors..
  • The foam used for JVCC DC-WGT-01 Window Glazing Tape is a high performance closed cell cross-linked polyethylene which is coated on both sides with a high-performance solvent-based acrylic adhesive. The adhesive system is formulated to bond with glass, wood, and aluminum substrates with quick stick, high peel adhesion, and a very good strength..
  • JVCC DC-WGT-01 double-sided window glazing tape has outstanding resistance to weather needed for outdoor applications. It has a superior seal against dust and moisture due to its flexible, soft foam. The easy peel poly liner allows for continuous and complete liner removal during window glazing applications (creating the seal between the insulated glass panel and window sash which helps prevent air and water leakage)..
  • Glazing tape is a cleaner and more conven....
Check Stock

JVCC DC-WGT-01 Window Glazing Tape [Double-Sided, Closed Cell]: 1/16 in. Thick x 1/2 in. x 50 yds. (White)

  • JVCC DC-WGT-01 Window Glazing Tape is a double-sided PE foam tape that is designed specifically for window glazing and is American Architectural Manufacturers Association (AAMA) certified..
  • Glazing tape is typically used during the installation process to prevent wind and water from entering by creating the inside seal between the insulated glass panel and the window sash/box. Other uses include mounting of emblems, nameplates, plastic strips and mirrors..
  • The foam used for JVCC DC-WGT-01 Window Glazing Tape is a high performance closed cell cross-linked polyethylene which is coated on both sides with a high-performance solvent-based acrylic adhesive. The adhesive system is formulated to bond with glass, wood, and aluminum substrates with quick stick, high peel adhesion, and very good strength. Glazing tape is a cleaner and more convenient option over glazing putty and other messy or more difficult to apply products..
  • JVCC DC-WGT-01 double-sided window glazing tape has outstanding resistance to weather needed for outdoor applications. It has a superior seal against dust and moisture due to its flexible, soft foam. The easy-peel poly liner allows for continuous and complete liner removal during window glazing applications (creating the seal between the i....
Check Stock

JVCC DC-WGT-01 Window Glazing Tape [Double-Sided, Closed Cell]: 1/8 in. Thick x 1/2 in. x 75 ft. (Black)

  • JVCC DC-WGT-01 Window Glazing Tape is a double-sided PE foam tape that is designed specifically for window glazing and is American Architectural Manufacturers Association (AAMA) certified..
  • Glazing tape is typically used during the installation process to prevent wind and water from entering by creating the inside seal between the insulated glass panel and the window sash/box. Other uses include mounting of emblems, nameplates, plastic strips and mirrors..
  • The foam used for JVCC DC-WGT-01 Window Glazing Tape is a high performance closed cell cross-linked polyethylene which is coated on both sides with a high-performance solvent-based acrylic adhesive. The adhesive system is formulated to bond with glass, wood, and aluminum substrates with quick stick, high peel adhesion, and very good strength. Glazing tape is a cleaner and more convenient option over glazing putty and other messy or more difficult to apply products..
  • JVCC DC-WGT-01 double-sided window glazing tape has outstanding resistance to weather needed for outdoor applications. It has a superior seal against dust and moisture due to its flexible, soft foam. The easy-peel poly liner allows for continuous and complete liner removal during window glazing applications (creating the seal between the i....
Check Stock

JVCC DC-WGT-01 Window Glazing Tape [Double-Sided, Closed Cell]: 1/16 in. Thick x 1/4 in. x 50 yds. (Black)

  • JVCC DC-WGT-01 Window Glazing Tape is a double-sided PE foam tape that is designed specifically for window glazing and is American Architectural Manufacturers Association (AAMA) certified..
  • Glazing tape is typically used during the installation process to prevent wind and water from entering by creating the inside seal between the insulated glass panel and the window sash/box. Other uses include mounting of emblems, nameplates, plastic strips and mirrors..
  • The foam used for JVCC DC-WGT-01 Window Glazing Tape is a high performance closed cell cross-linked polyethylene which is coated on both sides with a high-performance solvent-based acrylic adhesive. The adhesive system is formulated to bond with glass, wood, and aluminum substrates with quick stick, high peel adhesion, and very good strength. Glazing tape is a cleaner and more convenient option over glazing putty and other messy or more difficult to apply products..
  • JVCC DC-WGT-01 double-sided window glazing tape has outstanding resistance to weather needed for outdoor applications. It has a superior seal against dust and moisture due to its flexible, soft foam. The easy-peel poly liner allows for continuous and complete liner removal during window glazing applications (creating the seal between the i....
Check Stock