Best Pe Heat Shrink Tape

1 Roll 100% Total Transfer Tamper Evident Security Packing Tape (2 Inches x 55 Yards x 2 Mil, Do Not Break “Caution”, Ultra-Thick “Void” Film, Red – TamperSeals Group)

  • ... made at removal of tape, while other security tapes usually needed at least a few minutes to reveal "void"..
  • ✅【COMPATIBLE WITH MOST SURFACES】– Besides high energy surface, also including LOW energy surface such as pressed or uncoated paper board, light texture polypropylene, deep texture polypropylene, heat shrink film (PE.
  • PVC), Stretch Wrap Film (LLDPE), Tyvek, Smooth finish Styrofoam, rough bare wood etc..
  • ✅【UNIQUE PLASTIC CORE & PROTECTIVE FLIM LAMINATED ON EACH TAPE】- Unlike others’ tape with a paper core, we use a 3” plastic core and laminate film on each security tape for you to get a clean and beautiful appearance..
Check Stock

2 Rolls 100% Total Transfer Tamper Proof Security Seal Tapes (1 Inch x 55 Yards x 2 Mil, Do Not Break “Caution”, Ultra-Thick “Void” Film, Red – TamperSeals Group)

  • ...re made at removal of tape, while other security tapes usually needed at least a few minutes to reveal "void"..
  • ✅ [COMPATIBLE WITH MOST SURFACES] – Besides high energy surface, also including LOW energy surface such as pressed or uncoated paper board, light texture polypropylene, deep texture polypropylene, heat shrink film (PE.
  • PVC), Stretch Wrap Film (LLDPE), Tyvek, Smooth finish Styrofoam, rough bare wood etc..
  • ✅ [UNIQUE HIGH-GRADE PACKAGING WITH PLASTIC CORE & PROTECTIVE FLIM LAMINATED ON EACH TAPE] - Unlike others’ tape with a paper core, we use a 3” plastic core and laminate film on each security tape for you to get a clean and beautiful appearance..
Check Stock

TECHTONGDA Thermal Shrink Wrap Machine Heat Tunnel Packaging for PP POF PVC 12X6inch Shrink Size 220V Mesh Type

  • 【Application】The Thermal Shrink Wrap Machine is used to pack products with PVC/PP/PE shrink wrap film. It is applicable to a variety of products,....
  • 【Fast and even heating】The thermal shrink packaging machine adopts quartz farinfrared tube and is equipped with a fan inside the chamber to spread....
  • 【12*6inch Shrink Size】The size of the inlet and outlet is 12*6inch. The max. shrink size is 12*6inch..
  • 【Intelligent and Safe】Intelligent control panel,with simple design,clear buttons and simple opeation. With leakage circuit breacker for safety..
  • 【Long Service Life】Heat emission holes in the machine dissipates the excess heat produced by the machine to extend the service life of the....
Check Stock

Aonomi Compatible Industrial Heat Shrink Tube Labels Replacement for DYMO 18053 Fit with DYMO Rhino 4200 5200 5000 6000 Industrial Label Maker Black on White 3/8 x 4.9 ,10-Pack

  • Compatible with DYMO Rhino Pro 1000, 3000, 4200, 5000, 5200, 6000, ILP-219, 3M PL100, PL200, PL300 and Tyco T107M label makers..
  • Size of Each Tape: 3/8 inch (9mm) wide, 4.9 feet (1.5m) long. The size indication for this Heat-Shrink Tube is the width of the flattened tube as a....
  • Made of industrial grade polyolefin offers a 3:1 heat shrink ratio make sure to fit on wires or cables and make heat-shrink tube labels indispensable....
  • Heat shrink tube offers an excellent method of labeling wires and cables: Fantastic custom heat shrink solution, print legibly and shrink up perfectly....
  • All heat-shrink tube labels offer the convenience of printing directly on the tubing itself with any Industrial labeling tool for high-end cable....
Check Stock

REDIAMANT A + + Car Molding Emblem Tape Automotive Double Sided Heavy Duty Extreme Super Strong Sticky Auto Attachment Waterproof Weatherproof Wearherstrip Adhesive Mounting Exterior Interior

  • ★ [17520 Hours Stick Test] ★ – Double sided automotive emblem tape also known as two way face car molding emblem tape for auto, truck, marine has gone stick test 17520 hours before enter market. Testing on adhesive, heavy dutymounting, highstrength, stick strong, heat proof, melt resistant, humidity and wearherstrip adhesive. Higher grade double sided tape heavy duty emblem automotive is liner removable friendly, waterproof, weatherproof, extreme super strong glue self adhesive and odorless..
  • ★ [Strong & Heavy Duty on Steel] ★ - Two way tape double sided heavy duty automobile emblem is best adhesion on steel industrial standard attachment tape strip with double-sided rubber pe foam both sides. Average weight 5.5lbs. Automotive bonding attachment heavy dutymounting two way tape for car vehicle truck deco, body trim emblem, side door trimming, windows louver, car badges and logos, car spoiler. It sticks on steel (best adhesion), plastic, aluminum, brick wall, acrylic, glass etc..
  • ★ [Heat proof 100°C/ 212°F & Waterproof] ★ - 2 way mounting tape two sided automotive emblem tape is high temp weatherproof extreme strong stick standing water, heat r....
Check Stock

650pcs Heat Shrink Tubing Black innhom Heat Shrink Tube Wire Shrink Wrap UL Approved Ratio 2:1 Electrical Cable Wire Kit Set Long Lasting Insulation Protection, Safe and Easy, Eco-Friendly Material

  • Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition does not contain heavy metal and other environmentally hazardous substances. No slowly or long-term virulence. No need to worry about your health when using innhom heat shrink wrap..
  • Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy and convenient to use with a heat gun..
  • Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and anti-aging. Shrink wrap wire tensile strength: 14 Mpa. Dielectric strength: 003e20kV/mm. Elongation at break: 003e400%. Volume resistivity: 003e1.0× 10^14Ω.cm. Cold-resistant bending -22℉(-30 °C) × 1h without cracking. Use innhom heat shrink tubes instead of ugly and short-lived electric tape..
  • Functional Wire Shrink Wrap Tubing: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. innhom heat shrink tubing assortment is mainly used in wire connection, rust prevention and cor....
Check Stock

24mm Car Molding Emblem Tape Automotive Double Sided Heavy Duty by Rediamant Extreme Super Strong Sticky Auto Attachment Waterproof Weatherproof Wearherstrip Adhesive Mounting Exterior Interior

  • ★ [17520 Hours Stick Test] ★ – Double sided automotive emblem tape also known as two way face car molding emblem tape for auto, truck, marine has gone stick test 17520 hours before enter market. Testing on adhesive, heavy dutymounting, highstrength, stick strong, heat proof, melt resistant, humidity and wearherstrip adhesive. Higher grade double sided tape heavy duty emblem automotive is liner removable friendly, waterproof, weatherproof, extreme super strong glue self adhesive and odorless..
  • ★ [Strong & Heavy Duty on Steel] ★ - Two way tape double sided heavy duty automobile emblem is best adhesion on steel industrial standard attachment tape strip with double-sided rubber pe foam both sides. Average weight 5.5lbs. Other than automotive bonding attachment heavy dutymounting two way tape for car vehicle, truck deco, body trim, emblem, dashboard, windows, fender, sides mirror, nameplate, rim. It sticks on steel (best adhesion), plastic, aluminum, brick wall, acrylic, glass etc..
  • ★ [Heat proof 100°C/ 212°F & Waterproof] ★ - 2 way mounting tape two sided automotive emblem tape is high temp weatherproof extreme strong stick standing water, heat r....
Check Stock

12mm Car Molding Emblem Tape Automotive Double Sided Heavy Duty by Rediamant Extreme Super Strong Sticky Auto Attachment Waterproof Weatherproof Wearherstrip Adhesive Mounting Exterior Interior

  • ★ [17520 Hours Stick Test] ★ – Double sided auto adhesive moulding tape also known as two way face car molding emblem tape for auto, truck, marine has gone stick test 17520 hours before enter market. Testing on adhesive, heavy dutymounting, highstrength, stick strong, heat proof, melt resistant, humidity and wearherstrip adhesive. High grade double sided tape heavy duty emblem automotive is liner removable friendly, waterproof, weatherproof, extreme super strong glue self adhesive and odorless..
  • ★ [Strong & Heavy Duty on Steel] ★ - Two way tape double sided heavy duty automobile emblem is best adhesion on steel industrial standard attachment tape strip with double-sided rubber pe foam both sides. Average weight 5.5lbs. Other than automotive bonding attachment heavy dutymounting two way tape for car vehicle, truck deco, body trim, emblem, dashboard, windows, fender, sides mirror, nameplate, rim. It sticks on steel (best adhesion), plastic, aluminum, brick wall, acrylic, glass etc..
  • ★ [Heat proof 100°C/ 212°F & Waterproof] ★ - 2 way mounting tape two sided automotive emblem tape is high temp weatherproof extreme strong stick standing water, hea....
Check Stock

Hilitchi Heat Shrink Butt Connectors Blue 16-14 AWG 50Pcs Solderless Electrical Wire Automotive Marine Crimp Connectors

  • Quality Waterproof Heat Shrink Butt Terminal Connector.
  • Material: Copper + PE. Copper is of good conductivity of electricity, corrosion resistant and have a high melting point..
  • Package Quantity: 50PCS electrical connectors, Type: Butt Terminal Connector. A.W.G: 16-14, Wire range: 1.5-2.5mm².
  • Good Application: Just make a crimp and apply heat. Used with a heat gun, these heat shrink butt connectors would create an airtight seal. Marine....
  • QUALITY AFTER-SALE: If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out satisfactory....
Check Stock

2 Pcs 1/2 inch (Diameter) Heat Shrink Tubing, 3:1 Adhesive-Lined Large Heat Wire Shrinkable Tube by MILAPEAK (4 Feet, Black & Red)

  • ★ Premium Wire Protector: Our heat shrink tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be exposed to harsh environments. They can be also used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your family. Round diameter: 1/2'', Length: 1.22M(4Ft)..
  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY..
  • ★ Fast & Easy Use: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and wi....
Check Stock

MILAPEAK 180 PCS Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Industrial Heat-Shrink Tubing - Black

  • ★ Good Tightness with Glue Lined: Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you DIY. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★ Multiple Sizes: 180pcs black high-quality marine heat shrink tubing for your choose, various sizes can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc..
  • ★ Tidy Connection: Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection..
  • ★ Safe & ECO-Friendly: Our heat shrink tubes are both UL certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, protect you and your famaily from toxins..
  • ★ Fast & Easy Use: Our heat shrink tubing was pre-cut to 3.5 inches, it is 3:1 heat shrink ratio, and will shrink up to 1/3 of or....
Check Stock

Shrinkfast 998 Heat Gun, 200000 BTU Propane Heat Gun, Ready to Use with 25' Hose, Regulator, Hard Case, and Wrench Made in the USA

  • Shrinkfast 998 Heat Gun has up to 260,00 BTUs of power, which can easily heat and shrink materials such as polyolefin (PO), polyethylene (PE), shrink wrap, polyvinyl chloride (PVC), and more. The 998 can allow you to bend and weld plastics as well..
  • Sleek design which can be handled easily. It weighs only 2.2 lbs and is considered very light compared to competitive heat guns. It was designed for excellent balance, operator comfort, and quick and simple usage..
  • The Shrinkfast 998 Heat Gun Kit includes the heat tool, 25' propane hose, adjustable regulator, wrench for tightening fittings, high-impact-plastic carrying case and an owners’ manual. The manufacturer’s recommended regulated pressure is 22.5 PSI. We also provide a full 1-year manufacturer’s warranty on parts..
  • The heat gun is very lightweight, durable, and suitable for a variety of jobs. This heat gun is perfect for crafters, DIYer, or handymen. It's also durable and powerful enough to be used on professional jobs..
  • The Shrinkfast heat gun has a wide range of applications, there are so many uses for a heat gun from domestic and crafty, to car maintenance and home improvement. Heat gun is ideal for shrink wrapping, removing old wallpaper, paint strippping, plastic & tarpaulin welding, and oth....
Check Stock

MILAPEAK 270 PCS Heat Shrink Tubing Kit - 3:1 Ratio Adhesive Lined, Marine Grade Shrink Wrap - Automotive Industrial Heat-Shrink Tubing - Black, Red

  • ★【Versatile & DIY Helper】- Multiple sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
  • ★【Safe & ECO-Friendly】- Our heat shrink tubes are both UL & CSA certified for up to 600V, 257 degrees Fahrenheit which ensures its safe and reliable. They are also RoHS Compliant, Formaldehyde (HCHO) Free, protect you and your famaily..
  • ★【Customized Protector】- Our heat shrink tubing has the advantages of good electrical insulation, good tightness and corrosion resistance, High temperature resistance. Especially the Heat activated adhesive lining provides impermeable seal to salt water and other liquids, which hase better performance when you and your kids DIY..
  • ★【Fast & Easy Use】- Are you bothered by the fact that wrapping cable wire connection with electric tape which is ugly and not safe enough. Now the good news is that our heat shrink tubing can avoid these troubles and give you a tidy connection. It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heatin....
Check Stock