Categories

Best Pe al pe Composite Pipe Extruder

SharkBite U701 PEX Tubing Cutter, For 1/4 Inch, 3/8 Inch, 1/2 Inch, 3/4 Inch, and 1 Inch Pipes

  • CUTS IN SECONDS: Place your PEX or PE-RT pipe in the pex into this pipe cutter and squeeze.
  • VERSATILITY: For clean, straight cuts, use with 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch and 1 inch SharkBite PEX tubing or PE-RT Pipe.
  • QUALITY: SharkBite's quality and performance is field-proven and is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • PERFORMANCE: Use this PEX tool to create a clean cut for your SharkBite fittings.
  • PREFERRED BY THE PRO: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • ...10V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manual.
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • ...r Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe....
Check Stock

TIPU 1-3/8

  • Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

Cuisinart SM-35 Precision Master 3.5 Quart (White) stand mixer

  • Powerful 350-watt motor is made of Die-cast metal construction with 3.5-quart stainless steel mixing bowl with handle.
  • Unit has tilt-back head that allows easy access to mixing bowl, 12 speeds for precision mixing and a power outlet for use with optional attachments.
  • Includes: chef’s whisk, flat mixing paddle, dough hook, and splash guard with pour spout, instruction manual and recipe book.
  • Compatible with Cuisinart accessories: Pasta Extruder (PE-50), Pasta Roller & Cutter Set (PRS-50), Meat Grinder (MG-50), Spiralizer/Slicer/Shredder (SPI-50).
Check Stock

PVC Pipe Cutter, One-hand Ratchet Pipe Cutting Tool for PVC/PPR/PEX/Rubber Hose Cut up to 42mm, Plastic Pipe Tubing Cutter with Replacement SK5 Steel Blade, No Burrs

  • 【Robust and Advanced Design】: Durable aluminum construction for heavy duty use. Ergonomic soft handle grip for reducing hand fatigue for long time working. Locking mechanism for safe storage..
  • 【Quick-change blade mechanism】: Plastic pipe cutter comes with a replacement 'V' shaped blade. High Hardness SK5 carbon steel sharp blade reduces tube deformation..
  • 【Ratchet drive Design】: The professional PVC cutter adopts self-locking ratchet design. The ratchet drive greatly enhances the bite force.It can prevent the cutter from springing back, and cutting is sharp, fast, safe. It was designed to make cutting pipes easily..
  • 【High Cutting Capacity】: The Pipe Cutter blade for cutting most plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multi layer pipes. the cutting capacity up to 1-2/3”(42mm) outside diameter..
  • 【Wide Application】: Suitable for plumber,professional maintenance staff,electrician and car maintenance master as well as daily home,decoration. Pipe shears is an ideal choice for cutting all kinds of plastic pipes and multi-layer composite tubes ..
Check Stock

SharkBite 22187-0000LFA Ball Valve 1 Inch x 1 Inch, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: 1 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications..
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications.
Check Stock

Reusable vacuum food storage bag, freezer bag, vacuum sealed bag set, with manual pump sealing clip, 3 sizes, 5 bags for each size, 2 free sealing clips

  • 3. Environmental protection: The vacuum food preservation bag is made of PE + PA composite material, which can be cleaned and reused and is more environmentally friendly..
  • 1. Sealability: The vacuum food preservation bag has a double-layer sealing strip, which is vacuum compressed, airtight, and has strong sealing performance. It is also equipped with a buckle for easy sealing and simple operation..
  • 4. Suit: This kit contains 3 different sizes of vacuum food preservation sealed bags, 5 of each size, 1 vacuum exhaust tool and 2 sealing clips as gifts..
  • 5. Markable: The surface of the vacuum food preservation bag can be marked with a pencil to facilitate the time memory of food storage..
  • 2. Safety: The vacuum food preservation bag adopts PE + PA composite material, which is safe and tasteless, and has a better preservation effect..
Check Stock

XT (50) Edger Blades 8" x 2" Fits Echo Stihl Husqvarna Ryobi Shindaiwa Red Max Gxfc

  • ❄️ Includes (2) Edger Blades. Length : 7-1/2" | Width : 2" | Center Hole Diameter : 1" | Thickness : 0.1". hardened steel, unsharpened edges..
  • ❄️ Compatible most Following Brands: Ryobi 613223/791-613223B, Echo 720237001, Stihl 4133 713 4102, Maruyama 216062, and Green Machine 237001..
  • ❄️ Compatible with Echo E3100, PAS2601, PE200, PE201, PE225, PE230, PE231, PE260, PE261, PE310, PE2000, PE2400 and PE2601. Stihl: FC72, FC75, FC85 and FC110. Also Compatible most Following Brands: Red Max 6367-15110, Shindaiwa 72950-92100, Hu-sqvarna 578 39 28-02/601-00 24-54, Poulan Pro 952711625 for 1000e Attachment, Craftsman 79240/85719..
  • ❄️ 7.5" Edger Blade Replace: 69601552632, 720237001, 601000749, 601002454, 636715110, 613223, 613223R, 719-613223-B, 72950-92100, 4133-713-4101, 4133-713-4102..
  • ❄️ Hint ! ! ! When not sure if this blade is right for you, you can measure the hole size and overall length of the blade, this is a very versatile blade that fits most brands..
Check Stock

Simthread Brother 40 Colors 40 Weight Polyester Embroidery Machine Thread Kit 550Y(500M) for Brother Babylock Janome Singer Husqvarna Bernina Embroidery and Sewing Machines

  • ★ For Use With: Brother PE700, PE750D, PE150V, PE170D, PE180D, PE700II, PE780D, PE770, Simplicity SB7050E, DreamMaker XE VE2200, HE1, BP2100, Designio DZ820E, PE500.
Check Stock

Sew Tech Embroidery Hoops for Brother PE800 SE1900 PE770 780D PE700 PC6500 Brother Innovis 1250 700 Babylock Embroidery Machine Hoop

  • This hoop set is compatible with Brother PE800 SE1900 PE770 PE700 PE700II PE750 PE750D PE780D PE800 PE8200 PE810L, Brother Innovis 700Ell 750E 1000 1200 1250, Brother PC8500 PC6500 embroidery machines and some baby lock embroidery machines.
  • Sew Tech embroidery machine hoops are accurate and strong.
  • Clear markings on hoops for easy reference.
  • Adjustable metal screw on the hoop help you to clamp a wide range of fabric firmly.
  • Used as a perfect replacement of the old hoops or have extra hoops to speed up your embroidery projects.
Check Stock

1 Inch CTS Yellow Medium-Density Poly Pipe Line for Gas Distribution PE2708 100 Feet

  • Yellow Medium-Density poly pipe for natural gas or liquid propan distribution. Bimodel MDPE (PE2708).
  • Min. Wall Thicknes: 0.090 (100 Foot Length).
  • Outstanding strength and durability providing longer pipeline service and enhanced pipeline integrity..
  • Provides outstanding resistance to slow crack growth (SCG) and rapid crack propagation (RCP) which provides for a safer gas distribution system..
  • IMPORTANT NOTE: There are various pipe sizes described as 1". This for CTS pipe not IPS pipe. These are different pipe sizing standards with different....
Check Stock

Embroidery Hoops Compatible with Brother PE800 PE770 780D PE700 PC6500 Brother Innovis 1250 700 Babylock Machine Hoop

  • SET OF 4 SIZES - Small Embroidery Hoop: SA442(EF82), Medium Embroidery Hoop: SA443(EF83), Large Embroidery Hoop: SA444(EF84), Extra Large Embroidery....
  • WIDE COMPATIBILITY - This hoop set is compatible with Brother PE800 SE1900 PE770 PE700 PE700II PE750 PE750D PE780D PE800 PE8200 PE810L, Brother....
  • PRODUCT FEATURES - Delicate touch and excellent polishing effect, make each one perfect. Adjustable metal screws on the hoop help you to clamp a wide....
  • DETAIL PROCESSING - Our embroidery machine hoops are accurate and strong with clear markings on hoops for easy reference..
  • MULTIFUNCTIONAL - Suitable for crafting dream catchers, making wind chimes, macrame creations, medicine wheels, plant hangers, spirit shields and....
Check Stock