Categories

Best Pe x Pipe Extrusion Line

Twinkle Star Sewer Jetter Kit for Pressure Washer -100 ft Hose, 1/4 Inch NPT, Drain Cleaning Hose, Button Nose & Rotating Sewer Jetting Nozzle, Orifice 4.0, 4.5, 5.5, 4000 PSI

  • ...ong toughness sewer line hose with couplings, allowing hose and nozzles to fit through sewer line. PE tube, PVC cover, Dual-layer terylene reinforcement, which is very durable and can resist weather,oil, ozone and abrasion..
  • [3 + 1 Sewer Jetter Nozzle]: 3 Button Noses, 1 front jet at 0° to clear the blockage in the pipe, 3 rear jets at 33° pushes forward and washes loose debris before. Orifice: 4.0, 4.5, 5.5. Rotating Nozzle rotates 3 rear jets at 33° for shot blasting, the water unblock pipe, clear and flush debris. Orifice: 4.5..
  • [Widely Used]: Work with lots electric and gas-powered pressure washers up to 4,000 PSI. The sewer jetter hose can be used for pressure washer pump with American standard M22-14 Solid Brass. It also can be connect to trigger gun or pressure washer wand with 1/4″ quick connector..
  • [Tips]: Always disconnect the accessory when finished using it. Do not leave the fitting unattended or under pressure when not in use. If for any reason you’re not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND..
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 5/16\ 3.3ft Blue for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 5/16-inch(5mm x 8mm)(ID. x OD.), 1/16-inch(1.5mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

General Tools Hose and Tubing Cutter #115 - Cuts up to 2 Inch Flexible Rubber, PVC, ABS and Polyethylene Tubing

  • CUTS RUBBER TUBING: Cuts up to 2-inch rubber hose or tube..
  • CUT PE OR ABS PIPE: Cuts up to 1-1/2 inch PE and ABS pipe..
  • CUTS PVC PIPE: Cuts up to 1-1/4 inch PVC pipe..
  • HOLDS TIGHT: The curved holder supports the hose or tubing during square cuts..
  • LONG HANDLES: Long handles for added leverage..
Check Stock

MECCANIXITY Petrol Fuel Line Hose 3/16\ x 3/8\ 3.3ft Yellow for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc..
  • Fuel line hose, is in size of : 3.3ft long, 3/16-inch x 3/8-inch(4.5mm x 9.3mm)(ID. x OD.), 3/32-inch(2.4mm) wall thickness.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine.
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

Gas Flex 1/2 Tubing Pipe KIT 33ft with 2 MALE Fittings Gasflex

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • Comes with a 1/2" MALE NPT fittings on both ends.
  • Running gas lines to remote areas in the yard (BBQ -Jacuzzi - FIRE PIT).
  • ½" Nominal Pipe size: 12mm ID x 16mmOD (0.48" ID x 0.63" OD)..
Check Stock

Longing Home 2 Pack Rain Gutter Downspout Extensions, Flexible Drain Down Spout Hose Extension Gutter Connector Rainwater Drainage Gutter Extender from 21 to 60 Inches - Black

  • ...sion is retractable and can easily be extended from 21 inches to 60 inches to direct rainwater to where you want it to go. Also it is easy to bend and hold various shapes to suit various situations at different home entrances..
  • 【Easy Installation】 Simply screw the pipe inlet to the extension tube, then screw it in after you have connected it to the gutter and you are done. A detachable adapter allows you to quickly and easily attach it to an existing downpipe..
  • 【Package】 2 x Downspout drainage extensions.
  • 2 x raw material straps. The raw material tape can be wrapped around the threads of the pipe connection and then screwed into the pipe inlet. This effectively prevents rainwater from leaking through the connection. Giving you a better experience of using the product..
Check Stock

Gas Flex 3/4 GAS Tubing Pipe KIT 33 Ft with 2 Fittings GasFlex Natural GAS Propane

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • 3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
  • CAPACITY: 220,000 BTUH FOR LPG APPLIANCES : 200,000 BTUH FOR NATURAL GAS APPLIANCES.
  • KIT arrives with the brass connectors hand tightened for ease of installation.
  • Comes with 2 fittings , the fittings are MALE NPT 3/4" both ends.
Check Stock

Gas Flex 3/4 GAS Tubing Pipe KIT 66 Ft with 2 Fittings GasFlex Natural GAS or Propane

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • Comes with 2 fittings , the fittings are MALE 3/4" NPT thread.
  • CAPACITY: 150,000 BTUH LPG APPLIANCES, 140,000 BTUH FOR NATURAL GAS APPLIANCES.
  • KIT arrives with the brass connectors hand tightened for ease of installation.
  • 3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
Check Stock

Amazon Basics Ratcheting Plastic Pipe Cutter - 1/8-inch to 1-5/8-inch

  • Pipe-cutting tool for cutting plastic pipes and tubes ranging from 1/8 inch to 1-5/8 inches in diameter.
  • lightweight yet sturdy aluminum handle and a sharp stainless steel blade.
  • Suitable for multilayer tubing and most types of plastic, including PVC, CPVC, PP, PEX, PE, and rubber hose.
  • Ratchet drive mechanism ensures energy-efficient cutting.
  • Locking hook on the end of the handle for locking the tool securely closed when not in use.
  • Product dimensions: 8.9 x 4.4 x 1.1 inches (LxWxH).
Check Stock

SharkBite U701 PEX Tubing Cutter, For 1/4 Inch, 3/8 Inch, 1/2 Inch, 3/4 Inch, and 1 Inch Pipes

  • CUTS IN SECONDS: Place your PEX or PE-RT pipe in the pex into this pipe cutter and squeeze.
  • VERSATILITY: For clean, straight cuts, use with 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch and 1 inch SharkBite PEX tubing or PE-RT Pipe.
  • QUALITY: SharkBite's quality and performance is field-proven and is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • PERFORMANCE: Use this PEX tool to create a clean cut for your SharkBite fittings.
  • PREFERRED BY THE PRO: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

MISSIGO Tee Adapters for Outdoor Cooling System Patio Misting System 3 Pcs

  • Package Includes- 1*35ft preassembled misting Line, 10 T-type tees and 1 straight-through, 10 brass misting nozzles, 1* 3/4" faucet connector,1 misting hose cutter, 10 hanging snap clips, 30 hanging clamps, 30 cable ties,1 teflon tape,1 user manual.
  • Excellent Tube Material- Using PE pipe, the pipe thickness is 0.4mm, thicker than others. 35 FT misting hose, 10 T-Joints with a cutter, you can freely customize the length and angle you want. Flexible and sunlight-resistant black PU tubing for long-life use..
  • High-Quality Nozzles: Made from brass material, anti-rust and mist effectively. The holding part is made from recyclable plastic material, which is good sealing, no leak, sleek and sturdy..
  • Effective Misting Cooling Systems- The misting system produces water mist, which absorbs the heat from the outdoor surrounding in hot summer, and provides cooling outdoor areas, cools the surrounding air temperatures up to 20℃ - 68℉.
  • Wide range of uses- Misting cooling system widely apply for garden, vegetable land, landscaping, greenhouse, humidification, trampoline water park, umbrella, shade sail, swimming pool/animal cage.Bring you a cool summer.
Check Stock

TIPU 1-3/8

  • Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock