Categories

Best Pe100 Pipe Fittings

Gas Flex 3/4 GAS Tubing Pipe KIT 66 Ft with 2 Fittings GasFlex Natural GAS or Propane

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • Comes with 2 fittings , the fittings are MALE 3/4" NPT thread.
  • CAPACITY: 150,000 BTUH LPG APPLIANCES, 140,000 BTUH FOR NATURAL GAS APPLIANCES.
  • KIT arrives with the brass connectors hand tightened for ease of installation.
  • 3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

  • 【Package Includes】1 pcs disconnect tongs tool.
  • 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
  • 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
  • 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
  • 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check Stock

SharkBite U701 PEX Tubing Cutter, For 1/4 Inch, 3/8 Inch, 1/2 Inch, 3/4 Inch, and 1 Inch Pipes

  • CUTS IN SECONDS: Place your PEX or PE-RT pipe in the pex into this pipe cutter and squeeze.
  • VERSATILITY: For clean, straight cuts, use with 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch and 1 inch SharkBite PEX tubing or PE-RT Pipe.
  • QUALITY: SharkBite's quality and performance is field-proven and is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • PERFORMANCE: Use this PEX tool to create a clean cut for your SharkBite fittings.
  • PREFERRED BY THE PRO: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs

  • Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
  • Made of quality plastic and stainless steel.
  • 3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • Working Temperature: 0-60°C | 32～140°F.
  • The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
  • Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
  • The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
Check Stock

SharkBite 1 Inch PVC x 3/4 Inch CTS Ball Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE 25551LF

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC, HDPE, and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
  • QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand....
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

  • ❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
  • and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
  • ❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
  • ❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
  • ❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 1-1/2 x 1 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Gas Flex 1/2 Tubing Pipe KIT 33ft with 2 MALE Fittings Gasflex

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • Comes with a 1/2" MALE NPT fittings on both ends.
  • Running gas lines to remote areas in the yard (BBQ -Jacuzzi - FIRE PIT).
  • ½" Nominal Pipe size: 12mm ID x 16mmOD (0.48" ID x 0.63" OD)..
Check Stock

SharkBite 1 Inch Ball Valve, Push to Connect Brass Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22223-0000LFA

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

3/4\ 6-Way Side Outlet Cross, Home TZH Cast Malleable Iron Pipe 6-Way Outlet Corner Fittings for Industrial vintage style DIY Project/Furniture/Shelving Decoration(10, 3/4\)

  • 1.Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 6-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • 2.Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 6-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 6-way outlet tee work great without sacrificing functionality..
  • 3.Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 6-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • 4.Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retr....
Check Stock

3/4\ 4-Way Side Outlet Tee, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project/Furniture/Shelving Decoration (10, 3/4\)

  • 1.Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable Black Iron fittings are 100% tested and protected right at the factory. Home TZH 4-way side outlet tee of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. 4-way outlet tee are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our 4-way outlet tee work great without sacrificing functionality..
  • 3.Without DIY Difficulty:The pipe fittings are threaded, just connect the threaded rods or pipes to the 4-way outlet tee, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • Your Personal DIY Style: The simple and industrial design complements traditional and contemporary decor. Because of its industrial malleable iron material and rustic design, it will bring your house or store a Loft Retro In....
Check Stock