Categories

Best Peak Values Cardss

VANPO Digital Torque Wrench 3/8 Inch drive(5-99.5 ft-lbs./6.8-135Nm), ±2% Torque Accuracy, Electronic Torque Wrench with Preset Value, Buzzer and LED Indicator, Small Torque Wrench Set for Bike Moto

  • 【Preset Mode】 (Upgrade) This torque wrench adds a preset mode, which can preset 6 sets of values in advance. Frequently used values are set for each section, which is convenient even when switching to adjacent values. For bicycles, motorcycles and mechanical equipment, etc..
  • 【Memory Mode】 This digital torque wrench provides Track and Peak modes. In Track mode, a balanced force can be applied by changing the value of the display. Added 500 sets of data storage function, the torque value generated will be recorded in Peak mode, which is convenient for you to check at any time..
  • 【Measurement Mode】The electric torque wrench has four measurement modes: kg-cm, Nm, in-lb, ft-lb. Only need simple operation, you can clearly see the numerical conversion between the measurement units through the display screen. It will meet the switching use between the measurement units according to different situations..
  • 【Reminder Mode】 When using the 3/8 drive torque wrench to reach the preset torque value, a rapid buzzer will sound, and the LED light will change from a flashing green light to a solid red light. The reminder can effectively avoid screw damage caused by excessive force..
  • 【Quick release and high precision】This small torque wrench can easily and....
Check Stock

Beslands HF-500N Digital Force Gauge Push and Pull Dynamometer Portable Tester High Precision LCD Measuring Instruments Thrust Pressure Meter (HF-500N)

  • 5 Testing Modes and 3 Display Method: N(Newton),Kg (Kilogram) and Lb (Pound) three measuring units for selection and conversion. Min.value:5N/0.51kg/1.12Lb.
  • Peak Value Maintaining: Maintain the display of peak value until manualzero clearing, can set up automatic PEAK time,from 1-9999 seconds.
  • Data Storage and Output Function: 447 testing values can be stored, The data can be input into computer through data line for various analyses.
  • Easy Reading: 6 digits large screen display, High precision and high resolution.
  • Chargeable Power Supply: The charging voltage is available from 100V to 240V, which can accommodate most areas in domestic and at abroad, It has also protection functions for short circuit, leakage and overload.
Check Stock

DSO 138 Oscilloscope Kit Open Source with Probe 2.4

  • This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Partially open-sourced,the MCU has been programmed.The oscilloscope circuit boards components are pre-soldered, no need soldered by yourself.The case is unassembled and requires assembly..
  • Adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

Mark-10 MTT03-10Z Series TT03 Torque Gauge 10ozFin Capacity

  • Ergonomic torque sensor with Jacobs chuck.
  • USB data output (for continuous output, see Model 5i indicator with Series R50 torque sensor).
  • Programmable set points with pass/fail indicators.
Check Stock

Mark-10 MTT03C-50 Series TT03C Cap Torque Gauges, 50lbs Capacity

  • Ergonomic torque sensor with Jacobs chuck.
  • Programmable set points with pass/fail indicators.
  • Live load bar graphs with set point markers.
Check Stock

Oscilloscope Multimeter, 2-in-1 Intelligent Digital Scope Meter Multimeter, Professional LED Handheld Oscilloscope Multimeter with 200ksps A/D Automatic Waveform Capture Function

  • DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
  • DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

3 PCS Vmax Dx Gx Metal Gold Plated Card Collector Rare Shiny Rainbow Gold Card Collection Cards The Best Gift for Collectors (Cards Box)

  • Excellent Material:The Vmax Gold Metal Card Is Made Of High-Quality Metal Materials, And The Laser Engraving Technology Makes The Font Of The Vmax Metal Card Clear And Accurate..
  • Shape And Size: These Gold Metal Cardss Are The Same Exact Size Of An Actual Cards, And Will Easily Fit In 5-Hole Cartoon Collectable Binders!.
  • Best Combination:There Are 5 Pcs Unique Rare Cards In One Pack. Rare Artwork That Can Express Your Love For Vmax Gold Cards..
  • Best Collection:This Vmax Metal Card Is Different From Other Paper Cards. The Cartoon Card Is Made Of Pure Metal, With Bright Colors And Luster, And Can Be Stored For A Longer Time..
  • As A Gift: These Vmax Gold Metal Cards Are A Must-Have For Collectors And Enthusiasts, And Your Child Will Jump With Joy When They Receive This Gift..
Check Stock

DSO138 Oscilloscope, DIY Mini Oscilloscope DSO-138, 2.4″ TFT 1MSPS Digital Oscilloscope Kit Handheld Pocket Sized 13803K (Welded Version)

  • 【WIDELY USE】DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay). Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
  • 【EXCELLENT QUALITY】This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • 【PRODUCT FEATURE】DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
  • 【NO NEED SOLDERED】DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • 【DIY DESIGN】Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

ALMOCN for Digital Oscilloscope Kit Open-sourced 2.4″ TFT 1MSPS for Digital Oscilloscope DIY Kit Handheld Pocket Sized 13803K, SMD pre-soldered

  • Digital DIY Oscilloscope Kit uses ARM Cortex-M3 processor (STM32F103C8), 2.4-inch color TFT display screen can be used as ARM test development board. Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Adjustable vertical displacement, and with instructions..
  • With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable..
  • With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
Check Stock

Dorhea DSO 150 Digital Oscilloscope Kit with Protection Box Color 2.4″ TFT LCD Full Assembled with Allicator Chip Cable Probe and Case Cover, Sensitivity for Oscilloscope DIY Kit

  • DSO 150 kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4″””” color TFT LCD (320×240) display and optical encoder for navigation..
  • Auto/normal/single trigger modes, easy to capture the moment waveform. use 9V DC power charger (NOT Included)..
  • Convenient to capture the instantaneous waveform. 2.4-inch color TFT display, waveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value. with secondary development on the basis, can be changed to voltmeter, data loggers..
  • Used for secondary development on the basis of this kit, it can be changed to millivoltmeter, data loggers with instructions, easy to install and operate..
  • waveform storage function: waveform will not lose when save/tune out the waveform/shutdown waveform, available rising or falling edge trigger, observable previous waveform before trigger (negative delay), can freeze waveform display at any time (HOLD function)..
Check Stock

Digital Force Meter, 0N/100N/300N/500N Digital Display Dynamometer Force Gauge Push and Pull Tester Meter with 5 Side Heads for Industries Machinery (100)

  • HIGH QUALITY: This push-pull force gauge is made of high-quality metal + plastic materials, strong and durable, not easy to damage, and long service life..
  • TWO MODES: This digital push-pull force gauge supports peak/real-time two modes, adapting to changes.
  • it supports real-time display of values and also supports keeping the peak value unchanged..
  • INSTANT READING: high-definition large-screen display, high sensitivity, graduation value of 0.01, accurate value of thrust and pull, digital display design, reading is more intuitive, clear and convenient..
  • MULTIPLE UNIT CONVERSION: Newton, kilogram, pound and other commonly used measurement units can meet a variety of needs and are more convenient to use..
  • WIDELY USED: Digital push-pull force gauges are now widely used in electronics, high and low voltage electrical appliances, automobiles, chemicals, light industry, construction and other industries and scientific research institutions for tensile and compression loads, insertion and extraction forces, destructive test tests, etc..
Check Stock

TAGVIT Digital Torque Wrench(7.38-147.5 ft-lbs./10-200 Nm), 1/2-Inch Drive Digital Torque Wrench Electronic Torque Wrench with Buzzer and LED Flash Notification for Bike Motorcycle Car Maintenance

  • ... torque value during use. The motorcycle torque wrench adopts a large LCD display, which is clear and easy to read. The highly backlit screen makes it easy to use even in dimly lit environments..
  • 10 Preset Modes: By adjusting the M0-M9 mode of the bicycle digital torque wrench , multiple sets of commonly used torque values and upper and lower limit alarm ranges of torque values can be preset (M0 Mode: preset torque value.
  • M1-M9 Mode: preset torque value Upper and lower limits). Ideal for beginners and professionals, it is widely used in bicycles, motorcycles, auto repair and industrial use, etc..
  • Quick Release Button: The quick release button on the head of the electronic torque wrench enables quick installation and removal of the socket, holding the socket firmly to prevent it from falling off. The extended handle design is ergonomic, comfortable to hold, non-slip, anti-rust, anti-corrosion, and more labor-saving during use. Made of high-quality materials can effectively extend the life of the wrench..
  • Led Light Flashing & Buzzer Alarm When approaching the set torque value, the digital torque wrench's LED light and buzzer will provide you with visual and audible feedback to remind you to stop applying force to prevent damage from over-tightening. The d....
Check Stock

DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Pocket-Size Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Electronic Learning Set, Assembled Vision (Welded)

  • This DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • This oscilloscope board uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • 2.4″ Oscilloscope with automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • 2.4 inch TFT handheld pocket-size digital oscilloscope with waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Partially open-sourced,the MCU has been programmed, adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock