Categories

Best Pei Sheet 500mm X 500mm

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

Official FLSUN V400 3D Printer Fast 400mm/s 8000+ mm/s² FDM Delta 3D Printer with Pre-Installed Klipper Firmware Pad, 300℃ Nozzle, Direct Drive Extruder, PEI Bed, Printing Size Φ300x410mm

  • ..., Especially suitable for printing with flexible consumables and hard consumables such as PLA. Bi metal 300℃ high-temp nozzle, Allow you to choose more kinds of filament like PLA PLA+ WOOD TPU ABS PETG PC NYLON(NEED DRIED)..
  • 【Auto-Leveling System & Steel Spring PEI Sheet Bed.
  • 】 FLSUN V400 upgrade automatic leveling system with a 25-point smart and precise calibration, easy to start printing.Steel spring PEI sheet bed,The bonding is more firm and the model is easy to take..
Check Stock

Official FLSUN V400 3D Printer Fastest 400mm/s 8000+ mm/s² FDM Delta 3D Printer with 7" Klipper Firmware Pad, 300℃ Nozzle, Direct Drive Extruder, PEI Bed, Printing Size Φ11.8x16 Inch

  • ...ion, Especially suitable for printing with flexible consumables and hard consumables such as PLA. Bi metal 300℃ high-temp nozzle, Allow you to choose more kinds of filament like PLA PLA+ WOOD TPU ABS PETG PC NYLON(NEED DRIED)..
  • Auto-Leveling System & Steel Spring PEI Sheet Bed.
  • FLSUN V400 upgrade automatic leveling system with a 25-point smart and precise calibration, easy to start printing.Steel spring PEI sheet bed,The bonding is more firm and the model is easy to take..
Check Stock

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

  • ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
  • ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
  • ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
  • ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
  • ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Check Stock

Maternity Robes and Matching Swaddle Blanket Set, Women Mommy Postpartum Robe Hospital Labor and Delivery Gown

  • Each Sheet size = 500mm x 300mm, Thickness = 12mm (1/2").
  • Fire Retardant FMVSS302, Temperature Range = -60°C > +160°C.
  • Self adhesive high quality liner can maintain shape under pressure yet be flexible enough to trim easily in many areas of the vehicle..
  • Sold as Carton of 1 Sheets, Pack Coverage = 0.15sq.m / 1.61sq.ft.
  • Our 455 MIL - 1/2" self-adhesive closed cell foam material is easy to cut, 100% waterproof and our sheet size 19.6" x 11.8" is easier to install.
Check Stock

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

  • ...Cr-10 S4, Formbot T-rex, Wombot Modus 3D printer, Creatbot, Tevo Black Widow, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol ....
Check Stock

Pair Rockville RV69.2C 6x9 Component Car Speakers 1000 Watts/220w RMS CEA Rated

  • Includes: (2) 6×9” speakers, (2) tweeters, (2) Crossovers, (2) Grills, Flush and surface Mounting accessories, Speaker wire..
  • Rockville RV69.2C 6×9 Component car speakers (pair). Peak Power Rating: 1000 Watts per Pair / 500 Watts Each. CEA Compliant RMS Rating: 220 Watts per Pair / 110 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids..
  • 1.2” PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover..
  • Frequency response: 30-22,000 Hz. Sensitivity: 91 dB @ 1w/1m. Mount depth: 3.35″. Impedance: 4 Ohm. Grilles included 1.2 Inch. Aluminum voice coils. 100% oxygen free copper voice coil windings. Black electro-plated T-yoke and washers..
  • Cotton spider material. Copper terminals. Cutout diameter: 8.58” x 5.83”. Magnet: 27 Oz Y25 magnet. Magnet dimensions: 120mm x 18mm. Fs: 60.735 hz. Re: 3.6 OHM. Qes: 1.638. Qts: 1.066. Qms: 3.05. Fits 6×9”..
Check Stock

Vlasy 3.4mm Microlink Beads Non-Silicone Copper Tubes Beads Locks Micro Link Ring Tube (1000Pcs, Black)

  • Disameter:3.4mm outside,3.0mm inside and 6mm length.
  • Ideal for extending your hair,increase length,volume,highlight.
  • The micro tubes also known as beads,which are primarily used for hair extensions.These micro-links are small,round beads,made of lightweight copper..
  • Quantity and color choose.You can choose the color according to your own demand.2500Pcs multi-color means that you will get Black x 500pcs,Brown x 500pcs,Blonde x 500pcs,Light Brown x 500pcs,Dark Brown x 500Pcs..
Check Stock

V-fox 40 Cavities Rectangle Caramel Silicone Molds for Chocolate Truffles, Ganache, Jelly, Candy and Praline, Ice Cube Tray, Random Color, Medium

  • Premium quality: Temperature resistant from -40 F to 500 F to allow for use in the freezer as well as the oven.
  • Each of the 40 rectangle cavities is 50 x 20 mm with a height of 15 mm, and a capacity of 0.5 oz., while the entire sheet measures 11.6 x 8.7 inch..
  • Multiple Uses: Can be used for chocolate truffles, jelly, candy, ice cube, ganache, and caramel for easy-to-create perfect sweet treats.
  • ideal for forming small sweets like candy tablets.
  • Long lasting: Withstands repeated use day after day.
Check Stock

Franke EDOX33229-1 Sink, 33\ x 22\ x 9\ deep, Onyx

  • Number of chambers: 1. Cut in countertop by template: no. Drainer position: reversible model. Additional information: hidden transfer. Cut in countertop: 764 x 484 mm..
  • External dimensions: 780 x 500 mm. Dimensions of the main bowl: 350 x 430 x 180 mm..
  • With draining board, Auto Plug, round knob, stainless steel/Silky Sheen.
Check Stock

SuperATV Winch Mounting Plate for Polaris Ranger Midsize 400/500 / Crew / 570/800 (See Fitment) | Powder-Coating Prevents Corrosion | Compatible with Many OEM and Aftermarket Winches

  • ✔️【Fits】2011-2014 Polaris Ranger Midsize 400 | 2011-2013 Polaris Ranger Midsize 500 | 2012-2013 Polaris Ranger 500 Crew | 2017+ Polaris Ranger Midsize 500 | 2014-2021 Polaris Ranger Midsize 570 | 2014 Polaris Ranger Midsize 570 Crew / 800 | NOTE: 2017+ mounts are only compatible with the 3500lb winch..
  • 【Ride More, Worry Less】SuperATV’s Polaris Ranger Winch Mounting Plate for the Polaris Ranger Midsize provides a secure mounting point for your Black Ops Winch, ensuring a safe and easy escape when you find yourself stuck in the mud. Knowing that you’re prepared for anything lets you ride more and worry less, because isn’t that what off-roading is all about?.
  • 【Powder-Coated Steel Construction】 Made out of 3/16” heavy-duty steel plating. They arrive at your doorstep with all required hardware, making installation a breeze. Your winch mount is laser cut and CNC brake press bent to give you a product that is as tough as you are. ....
Check Stock

Comgrow Textured/Smooth Double Sided PEI Sheet 235mmx235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

  • ✔️ 【Simple Installation】✔️ The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top..
  • ✔️ 【Excellent Adhesion】✔️ Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃..
  • ✔️ 【Wide Application】✔️ We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!.
  • ✔️【Easy Removal】✔️ This surface is easily removed and flexible. Prints come off the surface easily wh....
Check Stock

labwork Bottom & Top Engine Mount Rubber Damper Kit Replacement for 2004-2007 Yamaha Rhino 660

  • Replaces OEM Part Numbers: Polaris 3086811, 3089256, 3085369, 3085526,3085634, 3087170, 3087221, 3085377, 3085530, 3085635, 3085866, 3087224,3085379, 3085534, 3085371, 3089966,3084851,3085370, 3085074.
  • Compatible with Polaris Models: 2004-2005 Polaris ATP 500 4x4 HO, 1998-1999 Polaris Big Boss 500 6x6, 2002 Polaris Magnum 500 2x4, 1999-2003 Polaris Magnum 500 4x4, 2005-2009 Polaris Ranger 500 2x4,.
  • Compatible with Polaris Models: 2006 Polaris Sportsman 500 4x4 Browning HO EFI, 2007 Polaris Sportsman 500 4x4 Deluxe HO EFI, 2001-2002 Polaris Sportsman 500 4x4 DUSE, 2001-2010 Polaris Sportsman 500.
  • Compatible with Polaris Models: 2001 Polaris Sportsman 500 4x4 RSE HO, 2000-2008 Polaris Sportsman 500 6x6, 2008-2010 Polaris Sportsman 500 Touring EFI, 2010 Polaris Sportsman 500 Touring HO, 2007.
  • Includes Cylinder with bore and stroke 92.00mm x 75.00mm, Piston, Piston Rings, Wristpin and Circlips (2) and Chain Tensioner, Head Gasket, Base Gasket, Head Cover Gasket and Chain Tensioner Gasket.
Check Stock