Categories

Best Peltor Comtac Iii

1Pair Headset Helmet Adapter ARC Rail Adaptor Suspension Headphones Bracket Hunting Earmuffs Support Left & Right Side Attachments For Peltor Comtac (Black)

  • ★ [High Performance]Helmet Rail Adaptor 1Pair Tactical ARC Suspension Headset Support Headphones Bracket Hunting Earmuffs Left & Right Side Attachments For Peltor Comtac can match with full range of FAST , ACH , MICH helmet as long as they have arc rails on side. Attach your communications headsets directly to your Tactical Helmet ARC accessory rails.You no longer have to fight for space inside your helmet or remove helmet pads to fit a headset..
  • ★ [Fit For]By testing, Comtac I and Comtac II headset can be combined perfectly with this headset adapter. New version headset adapter can match with full range of FAST helmets (BJ, PJ , MH), ACH helmet, MICH helmet , IBH helmet, as long as they have ARC rails on side..
  • ★ [Convenient]With the hanging after the Comtac intercom headset, headset will be separated out from the arc-shaped headband, used on the card directly to the hanging chain..
  • ★[Rotating Design] Hang buckle can be fixed to the helmet on the 2 sides of the helmet rails, after installation, the Comtac headphones headset can rotate freely. Rotating design allows headset to swing up and out of the way when not in use. Improves the comfort and protection of your helmet..
  • ★ [Easy Installation] Require some assembly, mainly removing th....
Check Stock

baotongle 1Pair 3.9''x 1.8'' Tactical Helmet Headset Support ARC Rail Adaptor Suspension Headphones Bracket Hunting Earmuffs Left and Right Side Attachments For Peltor Comtac (Tan)

  • High Quality Helmet Rail Adaptor: 3.9”x 1.8”1Pair Tactical ARC Suspension Headset Support Headphones Bracket Hunting Earmuffs Left and Right Side Attachments For Peltor Comtac can match with full range of FAST helmets, ACH helmet, MICH helmet as long as they have arc rails on side..
  • Convenient for You:With the hanging after the Comtac intercom headset, headset will be separated out from the arc-shaped headband, used on the card directly to the hanging chain. It can attach your communications headsets directly to your Tactical Helmet ARC accessory rails..
  • Suitable for most helmet: By testing, Comtac I and Comtac II headset can be adapted perfectly for this headset adapter. New version headset adapter can match with full range of FAST helmets (BJ, PJ , MH), ACH helmet, MICH helmet , IBH helmet, as long as they have ARC rails on side..
  • Special Design:Hang buckle can be fixed to the helmet on the 2 sides of the helmet rails, after installation, the Comtac headphones headset can rotate freely. Rotating design allows headset to swing up and out of the way when not in use..
  • Easy assembly: mainly removing the ear muffs from the head band and then snapping them to the adapters. Improveing the comfort and protection of your helmet, you no longer ha....
Check Stock

Universal Low Profile ARC Rail Headset Adapters

  • Low profile, lightweight headset adapters.
  • Slide on and lock to any standard ARC rail, including Crye Airframe rails (no adapters needed).
  • Can also be installed on MLOK rails (MTEK Flux, HHV helmets, etc.).
  • Fits Howard Leight, Walker Razor, and Caldwell headsets and earmuffs with no adapters needed. Also available with tips to fit Peltor Comtac or MSA Sordin headsets.
Check Stock

EXFIL Peltor Quick Release Adapter Kit

  • Works with all Peltor COMTAC systems and a variety of other brands and models, includes one boom microphone adapter.
  • Eliminates rigid metal headband providing better fit and comfort.
  • Wiring is easily routed in or outside the helmet shell.
  • Tool-free attachment directly to the quick release slot on the EXFIL Rail 2.0, EXFIL Rail 3.0 and EXFIL SAR Rail Systems.
  • Open and closed positions allow quick donning and doffing of helmet.
Check Stock

Universal Communication Headset Adapters for ARC Rail Equipped Helmets (MSA Sordin)

  • Low profile, lightweight headset adapters.
  • Slide on and lock to OPS-Core Helmet ARC Rails.
  • Fits Howard Leight, Walker Razor, and Caldwell headsets and earmuffs with no adapters needed - Also available with tips to fit Peltor Comtac or MSA Sordin headsets (spade ends of headset adapters will need to be trimmed for use with Sordin tips).
  • Can be locked open for easy donning and doffing - Can be rotated to rear for storage.
  • Made by Armorwerx (a division of The Mercenary Company).
Check Stock

DLP Tactical Helmet ARC Rail Adaptor Set for Peltor ComTac Headsets

  • Attach your 3M Peltor Comtac or similar communications headsets directly to your Tactical Helmet ARC accessory rails. (Will also fit most other 3M hearing protection earmuffs with similar headband mounting posts).
  • Drastically improves the comfort and protection of your helmet, you no longer have to fight for space inside your helmet or remove helmet pads to fit a headset..
  • Rotating design allows headset to swing up and out of the way when not in use.
  • Installs in seconds on any mil-standard ARC rail and replaces existing headband, no permanent modification to headset or helmet required.
Check Stock

Replacement Gel Ear Pads Compatible With Peltor Tactical 100,300,500,Rangeguard, 3M WorkTunes Headsets Silicone Hearing Protector Hygiene Kit Hocazor G-1003

  • TWO WAYS TO INSTALL - 1. The adhesive allows you to peel and stick the gel ear cushion to headset(NOTE - You need to attach the silicone ear pads to your original plastic pads! This way more suitable for Peltor 100/500 and Rangeguard). 2. And they come with plastic plates that allow you to replace the original plastic base, and then stick the pads on the new base(This way more suitable for 3M other headphones). (And there are install tips on the package.).
  • DESIGNED FOR MOST 3M HEADSET - The above two methods are suitable for most of 3M Earmuffs, WorkTunes Connect, Peltor Tactical 100,300,500, Rangeguard, Shotgunner II, ComTac, ProTac, Sound Trap, Swat Tac, Tactical 6-S, TacticalPro, Peltor X1A-X5A. ZOHAN EM042, EM033..
  • SUPERIOR GEL CUSHIONS - HOCAZOR G-1003 has an ultra-thin sheet of polyurethane that Great outer skin allows silicone gel to not easily break and spill. Meanwhile with addictive touch, durable and skin-friendly. Earpads need to be cleaned or replaced regularly to keep ears healthy. The G-1003 material is easy to clean and greatly increases the service life of the ear cushions and helps you save money..
  • MORE COMFORTABLE, MORE CONVENIENT - There is a hole on the gel cushions, which provide anti-sweat, and is easy to clean, you could clean th....
Check Stock

Wildoor Tactical Helmet ARC Rail Adapter Suspension Headphones Bracket Hunting Earmuffs Left & Right Side Attachments for Peltor Comtac Headsets Support -Black (Pack of 2)

  • By testing, Comtac I and Comtac II headset can be combined perfectly with this headset adapter..
  • New version headset adapter can match with full range of FAST helmets (BJ, PJ , MH), ACH helmet, MICH helmet IBH helmet as long as they have arc rails on side. Attach your communications headsets directly to your Tactical Helmet ARC accessory rails. Improves the comfort and protection of your helmet, you no longer have to fight for space inside your helmet or remove helmet pads to fit a headset..
  • The OPS CORE style Helmet Rail Headset Accessories use for MSA Sordin headphones, Comtac I and Comtac II headset can be combined perfectly with this headset adapter..
  • Hang buckle can be fixed to the helmet on the 2 sides of the helmet rails, after installation, the Comtac headphones headset can rotate freely. Rotating design allows headset to swing up and out of the way when not in use..
  • Require some assembly, mainly removing the ear muffs from the head band and then snapping them to the adapters..
Check Stock

Jadedragon Tactical Helmet Headset Adapter ARC Rail Adaptor Suspension Headphones Bracket for COMTAC Headset Fast Helmet Fast Helmets BJ PJ MH ACH/MICH/IBH/Helmet Side Rail Brown

  • Two application mode：1.General mode, 2.extended mode：Can be equipped with some tactical equipment.
  • Comtac I and Comtac II headset can be combined perfectly with this headset adapter. New version headset adapter can match with full range of FAST....
  • Special Design:Hang buckle can be fixed to the helmet on the 2 sides of the helmet rails, after installation, the Comtac headphones headset can rotate....
  • It is easily assembled and suitable for most of Comtac style head phones..
Check Stock

Tactical Helmet Rail Suspension Headset Support,2pcs Plastic+Steel Helmet ARC Adapter Headphones Bracket Hunting Earmuffs Left and Right Side Attachments for Peltor Comtac (Tan)

  • Can match with full range of FAST helmets, ACH helmet, MICH helmet as long as they have arc rails on side​​.
  • By testing, Comtac I and Comtac II headset can be combined perfectly with this headset adapter.
  • With the hanging after the Comtac intercom headset, headset will be separated out from the arc-shaped headband, used on the card directly to the hanging chain.
  • Hang buckle can be fixed to the helmet on the 2 sides of the helmet rails, after installation, the Comtac headphones headset can rotate freely.
  • Require some assembly, mainly removing the ear muffs from the head band and then snapping them to the adapters.
Check Stock

Tactical Headset, Over The Head, Black

  • HELP PROTECT YOUR HEARING: NRR 23 decibel. Helps protect your hearing and can help improve situational awareness and communications in challenging environments.
  • COMFORT: The small and lightweight design helps improve overall comfort and user experience.
  • MICROPHONES: Environmental microphones for level dependent hearing protection and situational awareness.
  • RECHARGEABLE LI-ION BATTERY: Provides up to 16 hours of continuous operation. Recharges in approximately 90 minutes. Rechargeable via micro USB or 3 AA alkaline batteries.
  • WATERPROOF RATING: Earpiece and case (with lid and USB port securely closed) are IP67 compliant.
  • MULTIPLE USES: Construction, Maintenance, Manufacturing, and Law Enforcement.
  • KIT CONTAINS: Portable charging case, 1 pair 3M PELTOR UltraFit Eartips Small, 1 pair 3M PELTOR UltraFit Eartips Medium, 1 pair 3M PELTOR UltraFit Eartips Large, 1 pair 3M PELTOR Triple C Eartips, 15 pairs wind screen foam, 3 AA batteries, retention cord, and user instructions.
  • Industrial/occupational uses only. Not for consumer sale or use.
Check Stock

Conversion Tips for MSA Sordin Headsets compatible with 3M Peltor Comtac ARC Rail Headset Adapters

  • For converting MSA Sordin / TCI Liberator headsets to fit on 3M Peltor Rail adaptors..
  • Compatible with 3M Peltor Rail adaptors..
  • Simply trim spade tip from existing 3M Peltor headset adapters and bolt these CNC machined Sordin compatible tips to your headset adapter arms..
  • Includes 4x MSA Sordin tips, set screws, snap retaining rings, and installation hex wrench..
  • Conversion kit only- Helmet, headset, accessory rail adapters etc. not included..
Check Stock

ATAIRSOFT Tactical Helmet Headset Adapter for COMTAC Headset Fast Helmet Side Rail

  • ★ Made by high quality nylon plastic material, Connect the Fast Helmet Side Rail and ZTAC COMTAC series headphones firmly. It can be easily installed in the Fast helmet side rail..
  • ★ Package including: 1 pair of Rail Adapter Headset Holder Set, 1 pair of 20mm rails, 1 Installation Fittings. Available in 4 colors: Black / DE / FG / OD green.
  • ★ Only suitable for FAST helmet rails and ZTAC COMTAC series headset..
  • ★ The 2pcs 20mm rails are used to connect flashlight or laser pointer..
Check Stock