Categories

Best Peltor Rail Adapter

1Pair Headset Helmet Adapter ARC Rail Adaptor Suspension Headphones Bracket Hunting Earmuffs Support Left & Right Side Attachments For Peltor Comtac (Black)

  • ... they have arc rails on side. Attach your communications headsets directly to your Tactical Helmet ARC accessory rails.You no longer have to fight for space inside your helmet or remove helmet pads to fit a headset..
  • ★ [Fit For]By testing, Comtac I and Comtac II headset can be combined perfectly with this headset adapter. New version headset adapter can match with full range of FAST helmets (BJ, PJ , MH), ACH helmet, MICH helmet , IBH helmet, as long as they have ARC rails on side..
  • ★ [Convenient]With the hanging after the Comtac intercom headset, headset will be separated out from the arc-shaped headband, used on the card directly to the hanging chain..
  • ★[Rotating Design] Hang buckle can be fixed to the helmet on the 2 sides of the helmet rails, after installation, the Comtac headphones headset can rotate freely. Rotating design allows headset to swing up and out of the way when not in use. Improves the comfort and protection of your helmet..
  • ★ [Easy Installation] Require some assembly, mainly removing the ear muffs from the head band and then snapping them to the adapters..
Check Stock

Universal Low Profile ARC Rail Headset Adapters

  • Low profile, lightweight headset adapters.
  • Slide on and lock to any standard ARC rail, including Crye Airframe rails (no adapters needed).
  • Can also be installed on MLOK rails (MTEK Flux, HHV helmets, etc.).
  • Fits Howard Leight, Walker Razor, and Caldwell headsets and earmuffs with no adapters needed. Also available with tips to fit Peltor Comtac or MSA Sordin headsets.
Check Stock

BAOFENG UV-5RA (New Generation) Long Rang Walkie Talkie,8-Watt Dual Band Two Way Radio with 2100mAh Li-ion Battery Portable Walkie Talkies with Includes Full Kit.Frequency Range 144-148/420-450Mhz

  • This headset is a civilian version compatible with the full range of civilian version tactical PTT adapters (compatible with civilian version TAC-SKY/Z Tactical/Z-TAC's PTT). Not compatible with military-defined versions of PTT (not compatible with PELTOR PTT).
  • We equipped the headset with a K-plug PTT adapter. compatible K jack walkie-talkies. (Compatible with Baofeng UV-5R, UV5RB, UV5RC, UV-82 and other K jack walkie-talkies).
  • This stand version of the headset helmet adapter is an ARC track.The bracket mounts under the side of the helmet's ARC track. The helmet holder can be adjusted in size, can be rotated 360°, and can be moved up and down.The rail adapter of the bracket is the ARC core helmet track,It is suitable for FAST series helmets, ACH series helmets, MICH helmets ..
  • The headset adopts electronic active noise reduction and sound acquisition technology, and the volume of the headset can be adjusted. Headphones provide radio communication/hearing protection/sound amplification/can pick up surrounding sounds..
  • The ear pads of the earphones are silicone ear pads, which have higher elasticity and sealing, providing more comfort and sound isolation. The headphone plug is a standard 7.0mm plug.Detachable microphones can be interchanged left and righ....
Check Stock

baotongle 1Pair 3.9''x 1.8'' Tactical Helmet Headset Support ARC Rail Adaptor Suspension Headphones Bracket Hunting Earmuffs Left and Right Side Attachments For Peltor Comtac (Tan)

  • ...headset will be separated out from the arc-shaped headband, used on the card directly to the hanging chain. It can attach your communications headsets directly to your Tactical Helmet ARC accessory rails..
  • Suitable for most helmet: By testing, Comtac I and Comtac II headset can be adapted perfectly for this headset adapter. New version headset adapter can match with full range of FAST helmets (BJ, PJ , MH), ACH helmet, MICH helmet , IBH helmet, as long as they have ARC rails on side..
  • Special Design:Hang buckle can be fixed to the helmet on the 2 sides of the helmet rails, after installation, the Comtac headphones headset can rotate freely. Rotating design allows headset to swing up and out of the way when not in use..
  • Easy assembly: mainly removing the ear muffs from the head band and then snapping them to the adapters. Improveing the comfort and protection of your helmet, you no longer have to fight for space inside your helmet or remove helmet pads to fit a headset..
Check Stock

Tactical Headset, Over The Head, Black

  • HELP PROTECT YOUR HEARING: NRR 23 decibel. Helps protect your hearing and can help improve situational awareness and communications in challenging environments.
  • COMFORT: The small and lightweight design helps improve overall comfort and user experience.
  • MICROPHONES: Environmental microphones for level dependent hearing protection and situational awareness.
  • RECHARGEABLE LI-ION BATTERY: Provides up to 16 hours of continuous operation. Recharges in approximately 90 minutes. Rechargeable via micro USB or 3 AA alkaline batteries.
  • WATERPROOF RATING: Earpiece and case (with lid and USB port securely closed) are IP67 compliant.
  • MULTIPLE USES: Construction, Maintenance, Manufacturing, and Law Enforcement.
  • KIT CONTAINS: Portable charging case, 1 pair 3M PELTOR UltraFit Eartips Small, 1 pair 3M PELTOR UltraFit Eartips Medium, 1 pair 3M PELTOR UltraFit Eartips Large, 1 pair 3M PELTOR Triple C Eartips, 15 pairs wind screen foam, 3 AA batteries, retention cord, and user instructions.
  • Industrial/occupational uses only. Not for consumer sale or use.
Check Stock

DLP Tactical Helmet ARC Rail Adaptor Set for Peltor ComTac Headsets

  • Attach your 3M Peltor Comtac or similar communications headsets directly to your Tactical Helmet ARC accessory rails. (Will also fit most other 3M hearing protection earmuffs with similar headband mounting posts).
  • Drastically improves the comfort and protection of your helmet, you no longer have to fight for space inside your helmet or remove helmet pads to fit a headset..
  • Rotating design allows headset to swing up and out of the way when not in use.
  • Installs in seconds on any mil-standard ARC rail and replaces existing headband, no permanent modification to headset or helmet required.
Check Stock

3M Peltor Hard Hat Adapter for Visors P3EV/2-10, Face Protection

  • Adapter allows mounting of 3M Peltor Visors (sold separately).
  • Snaps easily into most hard hats with universal accessory slots.
  • Use of adapters along with visors (sold separately) helps provide face protection.
  • Adapters weigh only 1.3 ounces to maintain lightweight hard hat gear.
Check Stock

Gotical- 4 Products Combo KeyMod 45 Degree Offset Picatinny Rail Mount with KeyMod Modular, 7 Slots Key mod Rail and 5 Slots Aluminum Key mod Rail (Pack of 4)

  • GOTICAL- 4 Products Combo KeyMod 45 Degree Offset Picatinny Rail Mount with KeyMod Modular, 7 Slots Key mod Rail and 5 Slots Aluminum Key mod Rail.
  • 45 DEGREE MOUNT : Use this 45 degree Picatinny mount in conjunction with a red dot sight, laser, flashlight, strap, or open sight..
  • KEYMOD QD MODULAR : Low Profile rail mounting adapter to increased mobility and decreased "snag" factor. Quick detach operation just push button to get swivel in and out from mount..
  • 7 SLOTS KEYMOD RAIL :Keymod Picatinny Rail Base Section for Key Mod Mount Rail System Converter Adapter Perfect for attaching picatinny flashlights, bipods, forward grips, Sights, or other accessories, greatly compatible with any standard keymod handguard mounting system, accepts all standard picatinny accessories.
  • 5 SLOTS KEYMOD RAIL :Keymod Picatinny Rail Base Section for Key Mod Mount Rail System Converter Adapter Perfect for attaching picatinny flashlights, bipods, forward grips, Sights, or other accessories, greatly compatible with any standard keymod handguard mounting system, accepts all standard picatinny accessories.
Check Stock

Armorwerx Replacement Headband for Peltor Comtac Ear Muffs

  • Complete replacement headband for 3M Peltor Comtac headsets.
  • Perfect for converting Peltor neckband earmuff models into over-the-head models.
  • Fits Comtac 1, Comtac 2, Comtac 3, Comtac 4, Sport 100, Sport 300, Sport 500, Rangeguard and more.
  • Includes removable Multicam cover and boom mic compatible guide arm.
  • Made by Armorwerx (a division of The Mercenary Company).
Check Stock

Makita 194368-5 55\ Guide Rail

  • 55" guide rail for use with Makita Plunge Saw models XPS01, XPS02, and SP6000J.
  • Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting.
  • Alternate use with select routers and circular saws, must use with router guide rail adapter (194579-2) and saw guide rail adapter (196953-0).
Check Stock

Ulightfire 46mm Low Profile Rail Adaptor,20mm to 11mm

  • 【Function] This low profile rail adapter is an excellent conversion of 20mm base to 11mm without causing any height raising.
  • 【Low Profile& Design] Low profile rail adaptor with spring loaded allows repeatable/consistent alignment and removable stop pins for secure installation .Constructed with aluminium alloy which is sturdy and durable..
  • 【Easy Installation] This rail adaptor with spring tension retraction expansion design easily to snap into picatinny or weaver base.
  • 【Specification] Size approximately 46mmX22mmX6mm.
Check Stock

Hearangel ARC Rail Adapter Accessories for Comta ii Comta iii Tactical Headsets

  • Rail adapter for arc rail, from headband verion to helmet mounting version, offer user-friendly experience.
  • With a full 360-degree rotative design, save space while no using.
  • Compatibel with comta ii comta iii airsoft headsets, easy to install, more comfortable using experience.
  • Rails of adapter can match with ARC RAIL ,many range of Ops-Core FAST helmets, ACH helmet, MICH helmet,etc,which has arc rail on side..
  • The ARC track has been installed beneath the side of the helmet, making it easier to modify the position of the tactical headsets..
Check Stock

Gogoku Bipod & Sling Combo with Adapter Mount Sling Swivel for M-Rail Pivot Bipod with S Lock Hunting 6 to 9 Inches Bipod

  • [PACKAGE INCLUDED]1 x 6-9” bipod, 1 x 2 point sling and 1 x adapter mount for M- rail, 1 x Sling mount with QD swivel for M- rail.
  • [S LOCK RATCHET LEVER PIVOT]Design for all the "S" Series (swivel) bipods, replaces the tension adjusting knob for an easier and firmer level control.
  • [ADJUSTABLE BIPOD LEG] Return spring adjustable leg of bipod,5 settings, 6” – 9”, you could adjust the length to meet different needs.
  • [ADAPTER MOUNT] Come with one adapter for M-rail, you could install the bipod to your rail or to QD sling stud.
  • [2 POINT SLING] Adjustable length of the sling strap: from 42” to 60”, and the quick pull loop allows for one handed fast adjustments.
Check Stock