Categories

Best Pen Turning Mandrel

Penn State Industries PKMSCUP Measuring Cup 4pc Set Woodturning Project Kit (1pack)

  • This is a woodturning project kit. A LATHE IS NEEDED TO 'TURN' INTO A FINISHED MEASURING CUP SET. Blanks, bushings, drill bit, and all other turning accessories are not included..
  • Includes (1) PKMSCUP Measuring Cup 4pc Set Woodturning Project Kit.
  • Each set includes the following measuring cup sizes: 1/4 cup, 1/3 cup, 1/2 cup, 1 cup.
  • Uses bushing set PKABBU. Requires a 7mm drill bit (PK-7MM) and 3/4" x 3/4" x 3-3/8" minimum blank size..
  • Easy to make on a pen mandrel. 'Turn' a must-have kitchen essential. Each set includes four of the most common measuring cup sizes used for cooking and baking.
  • 1/4 cup, 1/3 cup, 1/2 cup, and 1 cup. These cups are plated with durable, food safe stainless-steel inside, and chrome plated on the outside. Easy to hand-wash. The measurements are etched on the side for easy identification..
Check Stock

PSI Woodworking PENPAL Portable 15-Pound Mini Penmaking Lathe

  • 1/5hp 110V variable speed motor (0-4300 rpm).
  • Tailstock uses #1 Morse Taper mount (1MT).
  • Anodized aluminum base with mounting holes and flange to mount lathe on most surfaces.
  • Includes: pen mandrel shaft with collet closer nut for mounting, mandrel saver, (5) 7mm bushings, 7mm drill bit, (2) collet wrenches.
  • Also includes: mini dust collection hood with 2" port, 2" hose clamp, and hood mounting bracket.
Check Stock

Woodland Scenics P357 Pine Car Derby Speed Accessories, Wheel Turning Mandrel

  • PINEPRO-Pine Car Derby Wheel Turning Mandel.
  • This package contains one two-piece Mandrel and two sheets of sandpaper.
Check Stock

GEARWRENCH CV Joint Boot Clamp Tightening Wrench - 3191D

  • CV joint boot clamp wrench securely fastens band-it style free-end clamps, roll band clips and pre-formed CV boot clamps.
  • Use by turning the winding mandrel with a 1/2-inch socket or wrench.
Check Stock

OYOBox Mini Luxury Eyewear Organizer, Wood Display Box for Glasses + Sunglasses, Ebony Teak

  • GET YOUR PROJECT STARTED: 24-piece variety pen blank pack, 6 of each-Bloodwood, Mexican Ebony, Jatoba, and Hard Maple..
  • QUALITY: End and side finishes are tablesaw, planer or jointer surfaces. Guaranteed crack free..
  • PERFECT GIFT: Great for crafting exotic wood pens and project kits for wooden pen makers needing woodturning supplies..
  • CRAFT GORGEOUS PENS: Earlywood Pen Blanks are hardwood solid wood blanks that are the perfect size for turning pens using your existing lathe and pen press.
  • PACKAGE CONTENTS: Package includes (24) 0.75” x 0.75” x 5” inch wood turning blanks in assorted wood types – 6 bloodwood, 6 Mexican Ebony, 6 Jatoba, and 6 Hard Maple.
  • Pen hardware, turner, lathe, press not included.
Check Stock

Exotic Wood Pen Blanks 24-Pack: Bloodwood, Mexican Ebony, Jatoba, Hard Maple, 6 of Each Wood Type, 5 x 3/4 x 3/4 inches

  • GET YOUR PROJECT STARTED: 24-piece variety pen blank pack, 6 of each-Bloodwood, Mexican Ebony, Jatoba, and Hard Maple..
  • QUALITY: End and side finishes are tablesaw, planer or jointer surfaces. Guaranteed crack free..
  • PERFECT GIFT: Great for crafting exotic wood pens and project kits for wooden pen makers needing woodturning supplies..
  • CRAFT GORGEOUS PENS: Earlywood Pen Blanks are hardwood solid wood blanks that are the perfect size for turning pens using your existing lathe and pen press.
  • PACKAGE CONTENTS: Package includes (24) 0.75” x 0.75” x 5” inch wood turning blanks in assorted wood types – 6 bloodwood, 6 Mexican Ebony, 6 Jatoba, and 6 Hard Maple.
  • Pen hardware, turner, lathe, press not included.
Check Stock

Exotic Wood Pen Blanks 12-Pack: Bloodwood, Mexican Ebony, Jatoba, Hard Maple, 3 of Each Wood Type, 5 x 3/4 x 3/4 inches

  • GET YOUR PROJECT STARTED: 12-piece variety pen blank pack, 3 of each-Bloodwood, Mexican Ebony, Jatoba, and Hard Maple..
  • QUALITY: End and side finishes are tablesaw, planer or jointer surfaces. Guaranteed crack free..
  • PERFECT GIFT: Great for crafting exotic wood pens and project kits for wooden pen makers needing woodturning supplies..
  • CRAFT GORGEOUS PENS: Earlywood Pen Blanks are hardwood solid wood blanks that are the perfect size for turning pens using your existing lathe and pen press.
  • PACKAGE CONTENTS: Package includes (12) 0.75” x 0.75” x 5” inch wood turning blanks in assorted wood types – 3 bloodwood, 3 Mexican Ebony, 3 Jatoba, and 3 Hard Maple.
  • Pen hardware, turner, lathe, press not included.
Check Stock

Woodturning Project Kit for Stainless Steel Mini Cone Bottle Stopper

  • Precision machined to eliminate off-center turning.
  • For use with adjustable bottle stopper project kits.
  • Use with Woodcraft professional mandrel, sold separately.
  • WoodRiver is proudly made by Woodcraft, Americas leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

PSI Woodworking PKMBCM3 Turn Between Centers Mandrel for Drill Chuck Headstock Insert System

  • Turn more accurate, consistent, and concentric pen barrels.
  • Includes a headstock drill chuck insert and a live #2MT tailstock insert.
  • Each insert has a 7mm pin to mount bushings.
Check Stock

TEXALAN Woodworking Drill Chuck with 2 Morse Taper Mount 5/8 INCH

  • [Installation]: This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • [Packing]: Includes the 5/8 inch Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
  • [Application]: Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
  • [Usage]: Tightens with a Chuck key for excellent grip. Removes easily with knock out bar.
Check Stock

Boob Enema

  • 【QUICK-CHANGE HEAD】New Quick-change head design allows for easy changing of mandrels and nose pieces. Unique spring loaded mandrel automatically locks the mandrel lock pin for the fastest mandrel changes on the market..
  • 【ERGONOMIC AND SAVE EFFORT】14 inch longer steel arms and ergonomic handles with double compound hinges maximizing leverage, it can save more effort than those normal 13 inches rivet nut tool do, while being compact in design and easy to use compared with 16 inches..
  • 【EXTRA MANDREL LOCK PINS】Parts included 2 mandrel lock pins, 6-piece mandrel & 90-piece rivet nuts ( Metric M6 M8 M10.
  • SAE 1/4-20, 5/16-18, 3/8-16, 15 rivet nuts for each mandrel ). Please note that the M6 mandrel was installed in the gun..
  • 【Hard-Wearing Quality】AOBEN rivet nut tool is made from thick steel and surface is heat-treated to prevent corrosion and increase the durability and strength of the tool. All pieces are packed in a rugged and compact carrying case. Each tool fits snugly into its respective place to prevent moving around and scraping..
  • 【EXTRA LONG WARRANTY】We provide all hand rivet nut tool with 30 days Money-back and 1-Year Guarantee for your satisfaction. If you have any questions about the product, please feel free to contact us, we wi....
Check Stock

Underline the Black

  • 【QUICK-CHANGE HEAD】New Quick-change head design allows for easy changing of mandrels and nose pieces. Unique spring loaded mandrel automatically locks the mandrel lock pin for the fastest mandrel changes on the market..
  • 【ERGONOMIC AND SAVE EFFORT】14 inch longer steel arms and ergonomic handles with double compound hinges maximizing leverage, it can save more effort than those normal 13 inches rivet nut tool do, while being compact in design and easy to use compared with 16 inches..
  • 【EXTRA MANDREL LOCK PINS】Parts included 2 mandrel lock pins, 6-piece mandrel & 90-piece rivet nuts ( Metric M6 M8 M10.
  • SAE 1/4-20, 5/16-18, 3/8-16, 15 rivet nuts for each mandrel ). Please note that the M6 mandrel was installed in the gun..
  • 【Hard-Wearing Quality】AOBEN rivet nut tool is made from thick steel and surface is heat-treated to prevent corrosion and increase the durability and strength of the tool. All pieces are packed in a rugged and compact carrying case. Each tool fits snugly into its respective place to prevent moving around and scraping..
  • 【EXTRA LONG WARRANTY】We provide all hand rivet nut tool with 30 days Money-back and 1-Year Guarantee for your satisfaction. If you have any questions about the product, please feel free to contact us, we wi....
Check Stock

WEN LA164K 5/8-Inch Keyed Drill Chuck with MT2 Arbor Taper.

  • Holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter.
  • Easily open and close the three chuck jaws using the included key.
  • Compatible with any MT2 drill press, lathe, or mill.
  • Installs easily with the simple tap of a rubber mallet.
  • Designed for use with WEN models 3424, 3424T, 3427, 34018, 34027, 34034, 4214, and 4225.
Check Stock