Categories

Best Penta Driver Bit

TEKTON 3-in-1 Stubby Phillips/Slotted Driver (#2 x 1/4 in, Black) | DMT13002

  • Includes 1-pc. Stubby Driver Handle with 1/4 Inch Nut Driver Bit Tube and 1-pc. Phillips/Slotted Bit, 1/4 Inch Shank: #2 x 1/4 in..
  • One compact and versatile tool gives you access to 2 screwdriver sizes and 1 nut driver size.
  • Chrome-plated steel tube serves as both a 1/4 inch nut driver and a screwdriver bit holder.
  • Extremely durable handle made of glass-reinforced nylon and molded in the USA.
  • Fluted sides provide a natural grip for your fingers.
  • Bit tips are milled 21 mm down the shank, allowing for clearance into tight spaces.
  • A spring-loaded retaining ball holds the bit in the tube.
Check Stock

Real Avid Precision Screwdriver Set for Gunsmithing | 90 PCS Screw Driversets with LED Driver Hex Phillips & Torx Bit Set | Tool Kit Includes Magnetic Bit Driver Turret Tool Multibit Set & Case

  • UNIVERSAL SCREWDRIVER BIT SET: Comes with 87 labeled S2 Steel bits, including flat head screwdriver bit set, torx bit set, phillips screwdriver set &....
  • GUNSMITHING TOOL KIT: Essential gun repair tool kit with long bit driver, small bit driver, complete bit set, scope turret adjustment tool & storage....
  • FOR STUCK SCREWS: Small bit driver doubles as a screwdriver and can be used as an auxiliary handle to loosen stuck screws, precisely tighten screws or....
  • LED SCREWDRIVER BIT DRIVER: Comfortable, long screwdriver illuminated by bright light to easily work on dark, hard-to-reach screws..
  • HOLLOW GROUND SCREWDRIVER SET: A must-have for gun repair. Hollow ground bits are gun smithing essential tools, they match & fill gun screw slots,....
Check Stock

TEKTON 6-in-1 Torx Driver (T10 x T15, T20 x T25, Red) | DMS18012

  • 1-pc. Nut Driver Bit Tube: 1/4 in. x 5/16 in..
  • 1-pc. Torx Bit, 1/4 Inch Shank: T10 x T15.
  • 1-pc. Torx Bit, 5/16 Inch Shank: T20 x T25.
  • One compact and versatile tool gives you access to 4 screwdriver sizes and 2 nut driver sizes.
  • Chrome-plated steel tube serves as both a double-ended nut driver and a screwdriver bit holder.
  • Extremely durable handle made of glass-reinforced nylon and molded in the USA.
  • Fluted sides provide a natural grip for your fingers.
  • Bit tips are milled 21 mm down the shank, allowing for clearance into tight spaces.
Check Stock

Worx WX960L Nitro 20V Cordless Impact Driver & Drill/Driver Brushless Combo Kit

  • [THE POWER TO OUTPERFORM] Worx Nitro tools are engineered to provide greater power, performance, and run time.
  • [BRUSHLESS MOTORS] Brushless motors are more efficient, run 50% longer, are 25% more powerful, and have 10% longer life.
  • [HEAVY-DUTY CHUCK] Drill/Driver features ½ in. ratcheting metal chuck for superior bit retention.
  • [SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family.
  • [QUICK RELEASE CHUCK] Impact Driver features ¼ in. HEX metal chuck for quick bit changes.
  • [ALL-METAL GEARS] Drill/Driver has all-metal gears for dependable performance through the toughest jobs.
  • [3-SPEEDS] Impact Driver uses 3-speeds for adapting to all drilling and fastening applications.
  • [2-SPEEDS] Drill/Driver’s 2-speed gearing and 20+1 clutch settings allow users to find just the right speed and torque for best results..
  • [VARIABLE SPEED TRIGGERS] Provide easy starting and complete control of your drilling and driving.
  • [INCLUDES] Nitro Drill/Driver (WX102L.9), Nitro Impact Driver (WX261L.9), (2) 20V 2.0Ah Batteries (WA3575), 2A charger (WA3881), belt clip, double-ended bit, #2 screwdriver bit, carry bag.
Check Stock

StayCoolPumps Impeller Kit Replaces Volvo Penta 21951346

  • New impeller For Use On Volvo Penta, OMC, Johnson F5B pumps, Onan, Perkin, Yanmar, Jabsco and others.
  • Width 1-1/4" (31.5mm) . Diameter 2-1/4" (57mm) . 5/8 shaft 12 spline.
  • Includes O-rings and gaskets to fit mulitple applications. Recommended to replace annually. Install with dish soap..
  • If purchasing for use on Volvo Penta or OMC it only fits pumps with short screws prior to 2005. Please see picture..
  • Compaticle With: Volvo-Penta 825940, 860203, 3855546, 3858256, 3862281, 21213660, 876243, 3862567, 3856039 , 877400, 3862567 , 875811-2, 3856029,....
Check Stock

Klein Tools 80019 Tool Set, Multi-Bit Screwdriver and Nut Driver Tool Kit, 28 Different Industrial Strength Bits and Sizes, 4-Piece

  • Multi-Bit Screwdriver Tool Kit is the ideal 4-Piece Multi-Bit Tool Kit for any professional.
  • Multi-Bit Screwdriver / Nut Driver, 11-in-1 (Cat. No. 32500) holds 8 popular tips (Phillips, Slotted, Square, Torx Bits) and converts to 3 nut driver sizes.
  • Multi-Bit Electronics Screwdriver, 4-in-1, Phillips, Slotted Bits (Cat. No. 32581) has four different non-magnetic tips in one tool, includes #0 and #00 Phillips plus 1/8-Inch (3.2 mm) and 3/32-Inch (2.4 mm) Slotted tips.
  • Multi-Bit Screwdriver / Nut Driver, 6-in-1, Stubby, Phillips, Slotted Bits (Cat. No. 32561) has a compact interchangeable shaft that holds 4 universal tips and converts to 2 nut driver sizes.
  • INCLUDES: Non-magnetic Nut Driver sizes 1/4-Inch and 5/16-Inch and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) Slotted.
Check Stock

Multitool Bit Driver Extender Set, Bit Kits Multi-tool Accessories Bits Holder Adapter Set Compatible with Leatherman Skeletool/Wave Plus/MUT/Surge/Signal Bits (Silver)

  • Bit Extender for Various Multitools: the bit extender is can be widely applied in multitools of different models, compatible with leather skeletool, wave plus, mut, surge and signal series up to 30 different models.
  • Also applies to various bit options including the standard bits.
  • Anti-slip Design: the bit kit driver extender is designed with upgraded grains, which make it easier to pull out and insert in.
  • Please keep positive bit retention in case of the bit fallout while using the multitools.
  • Solid Materials for Longer Use: the multitool accessories bit kit is made of sturdy stainless steel, which is solid and won't break easily.
  • Also make it a great gift that will satisfy every husband, father or friends.
  • Precise Size: the driver extender length is 3 1/4 inch, bit holder diameter length 3/8 inch, accept standard bits and suitable for different multitools.
  • Note: the driver bit extender adapter is designed as a twisting tool and a driver, please avoid using it as a pry bar to protect your multitool for a longer service lifetime.
Check Stock

Wiha 38450 Bit Holding Screwdriver with SoftFinish Handle, 1/4\ x 125mm

  • MULTIPLE DIFFERENT FITS – The B50 comes with a multitude of diameter sleeves, to fit on a variety of screwdrivers and drill bits. Simply slide your Magnet Driver sleeve over the properly fitting power bit and utilize the rare earth magnet to help keep your bits in place. Traditional magnetized bits may help to keep the screw in place but lack the strength to keep the bit from falling off..
  • NEODYMIUM MAGNETS – Rare-earth magnets are extremely powerful, ensuring that your screw stays attached to the bit. The design of the Magnet Driver keeps your screw straight, helping to prevent cross-threading by ensuring a direct drive. This also helps to prevent stripped screws, as the Magnet Driver will keep your screw securely fastened onto your screwdriver..
  • COLOR CODED – Don’t fumble around your tool kit looking for the correct size. The Magnet Drivers easily identified colors allow you to find the proper size with ease. Every item in the Magnet Driver line contains the same color-coded sizing, so no matter which set you get, all sizes will be easily found. Don’t waste time looking for the right bit – use the Magnet Driver to save time and energy!.
  • VERSATILE – Whether you are using a screwdriver or impact driver, the Magnet Driver was made to work w....
Check Stock

HDMI to VGA Cable 3ft, DteeDck HDMI-to-VGA Male to Male Active Converter Connector Cord for Monitor Projector HDTV Laptop Desktop...

  • 【USB to VGA Adapter】Built-in most advanced IC chip converts USB signal to VGA signal (Must｜Computer with USB and Monitor/TV/Projector With VGA).
  • 【Install Driver】1. For first time to use, you need to install the driver. The driver has been recorded in the CD. 2. If your devices has no CD Player, You can also to download the latest driver from the link we provide..
  • 【Wide Compatibility】Compatible with Windows 11 x64 Drivers,Windows 10 64bit,Windows 10 32bit,Windows 8.1 64bit,Windows 8.1 32bit,Windows 8 64bit,Windows 8 32bit,Windows 7 64bit,Windows 7 32bit. Not support other device with usb 3.0 port like PS3/PS4, Xbox, chromebook, roku ect..
  • 【UH 1080P Video】Supports resolutions up to 1920×[email protected] (1080p Full HD) including 720p, 1600×1200, 1280×1024 for high definition monitors or projectors (Male USB to VGA Female)..
  • 【Not Bidirectional】USB to VGA adapter cable is one-way design. Can NOT be used as a VGA-to-USB converter cable,it only does USB to VGA on one way..
Check Stock

OEMTOOLS 25541 Cut and Drive Multi Tool, Drop Point Knife, Screwdriver, Bit Set, Ruler, and Bottle Opener, EDC, Contractor, HVAC Tool, Green and Black

  • MULTIFUNCTION POCKET TOOL: This all-in-one everyday carry tool functions as pocket knife and a screwdriver, eliminating the need to carry around a knife, driver, and bits.
  • Screwdriver knife has a ruler, bottle opener, and PH1, PH2, 5MM, and 7MM bits.
  • VARIETY OF USES: Our everyday folding knife is ideal for use as a tactical knife, pocket knife bottle opener, survival multitool, mechanic multitool, an everyday knife, HVAC tool, contractor tool, home maintenance all purpose tool, and many more uses.
  • HEAVY-DUTY KNIFE MULTITOOL BLADE: This multitool knife features a 3.4" drop point heat-treated stainless-steel blade.
  • Black heat-fortified coating protects the blade on this multitool bit set, knife, and screwdriver for the toughest jobs.
  • EASY BIT STORAGE: Both sides of the EDC pocket knife handle have a spring-loaded bit compartment for easy bit storage.
  • Multitool with bit set preloaded in the bit compartments.
  • EDC bit driver fits all standard 1/4" hex drive bits.
  • PRODUCT SPECIFICATIONS: Folding Magnetic Bit Driver Fits All Standard 1/4" Hex Drive Bits.
  • Spring Loaded Bit Compartments Preloaded with PH1, PH2, 5MM, and 7MM Bits.
  • Driver Shaft Marked with 1/8" and MM Markings for Quick Reference.
Check Stock

TEKTON 6-in-1 Phillips/Slotted Driver (#1 x 3/16 in, 2 x 1/4 in, Red) | DMS18010

  • 1-pc. Nut Driver Bit Tube: 1/4 in. x 5/16 in..
  • 1-pc. Phillips/Slotted Bit, 1/4 Inch Shank: #1 x 3/16 in..
  • 1-pc. Phillips/Slotted Bit, 5/16 Inch Shank: #2 x 1/4 in..
  • One compact and versatile tool gives you access to 4 screwdriver sizes and 2 nut driver sizes.
  • Chrome-plated steel tube serves as both a double-ended nut driver and a screwdriver bit holder.
  • Extremely durable handle made of glass-reinforced nylon and molded in the USA.
  • Fluted sides provide a natural grip for your fingers.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • Phillips, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down ....
Check Stock

Water Pump Impeller Kit for Volvo Penta Replaces 21213660 3855546 825940 3858256 3862281 21951348

  • New impeller used by Volvo Penta, OMC, Johnson F5B pumps, Onan, Perkin, Yanmar, Jabsco and others.
  • Width 1-1/4" (31.5mm) . Diameter 2-1/4" (57mm) . 5/8 shaft 12 spline.
  • Includes O-rings and gaskets to fit mulitple applications. Recommended to replace annually. Install with dish soap..
  • If purchasing for Volvo Penta or OMC it only fits pumps with short screws prior to 2005. Please see picture..
  • Replaces: Volvo-Penta 825940, 860203, 3855546, 3858256, 3862281, 21213660, 876243, 3862567, 3856039 , 877400, 3862567 , 875811-2, 3856029, 21951346.....
Check Stock