Categories

Best Per galvanized Steel Channel

DuroSTEEL Janus 8'x10' Insulated Commercial 1000i Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

BEAMNOVA 2200lb (1 Ton) Electric Hoist Lift Overhead Winch 4.92 Ft Remote Control Hook Pulley Lifting Strap Installation Kit Push Button Switch

  • ...ht, not easy to break, strong in bearing capacity, efficient, and safe. The metal case is bright red, strong and impact-resistant, and easy to remove..
  • SAFE & CONVENIENT - Built-in safety brake mechanism to maintain load even when power is off. The stopper device prevents the topping and greatly improves safety. Two-channel mount brackets are designed for easy flush mounting on a beam. The remote control makes operation easier. Accessories needed for installation are sent together with the electric hoist..
Check Stock

BEAMNOVA 1500lbs Electric Hoist Kit with 4.92 Ft Remote Control Overhead Winch Hook Pulley Lifting Strap I-Beam Installation Kit Push Button Switch

  • ...ht, not easy to break, strong in bearing capacity, efficient, and safe. The metal case is bright red, strong and impact-resistant, and easy to remove..
  • SAFE & CONVENIENT - Built-in safety brake mechanism to maintain load even when power is off. The stopper device prevents the topping and greatly improves safety. Two-channel mount brackets are designed for easy flush mounting on a beam. The remote control makes operation easier. Accessories needed for installation are sent together with the electric hoist..
Check Stock

4 Wheel Trolley Assembly, Stable Welded Roller Trolley for 1-5/8' Wide and All 1-5/8' or Taller Strut Channel (4)

  • Heavy Duty Build: Our roller trolley assembly is made using highs strength solid steel that’s impact resistant and zinc galvanized to offer protection against rust and corrosion. It features a solid bearing steel pin shaft in the strut channel as well.
  • Secure And Stable Performance: The four bearing trolley assembly features a welded bearing and pin shaft to offer more stability for secure use. It uses deep groove ball bearings to make sure you can operate it smoothly without making any noise.
  • For Long Term Use: Each pack comes with 2 beam trolleys that offer just the right balance of quality, durability, and performance. They offer low noise operation as well as being galvanized to provide smooth opening/closing even in the long term.
  • Versatile And Multi-Purpose: Each 4 wheel trolley assembly offers 450 lbs weight support and is suitable for use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel. It has a Diameter Hole of 9/16" (14mm) and 1/4" (6mm) Thickness.
  • We Have Your Back: If you have any issues with the trolley assembly 4 wheel then just let us know and we will help you resolve them quickly to ensure you are completely satisfied. Please Note: It’s recommended that you use the strut channel horizontally.
Check Stock

Croyant et le mecreant (Coédition MOLS) (French Edition)

  • ✅ Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, M10 (3/8inch) Bolt in the middle, 80mm (3.15inch) in length,Design Load in 770 pound..
  • ✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid alloy steel, which ensures the high strength of the Wheel trolley.Intermediate support of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection.
  • ✅ Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work..
  • ✅ Can used upside down: 3 nuts are prepared in the accessory,so that you can use the dollies upside down..
  • ✅Apply: For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel.
Check Stock

Champion Power Equipment-12003 ATV/UTV Winch Kit 2000-lb.

  • Powerful – 2000-lb. rated line pull powered by a 1-horsepower (12-volt) DC motor.
  • Efficient – Line speed of 3.3 feet per minute with a full load, and 10.5 feet per minute with no load.
  • Convenient – Included mounting channel, remote control and roller fairlead create an easier than ever winching experience.
  • Hassle-Free –The roller fairlead creates a safe and smooth pull with the dependable 49-foot galvanized super-duty aircraft cable which is able to withstand abrasive terrain without fraying. Rope Length 49 ft, Rope Diameter 5/32 in.
Check Stock

Genuine Unistrut P1000T 1-5/8 12 Gauge Metal Strut Channel Slotted Back Pre-Galvanized Zinc 5 Foot Length

  • 9/16" x 1-1/8" Short Slotted Back Channel.
Check Stock

Caddy Erico 812MB18 B18-Z Box/Conduit Hanger w/Rod/Wire Clip, (25-Pack)

  • SECURE ASSEMBLY: Ensure that your strut assembly is secure to floors or other surfaces when you have this Post Base Single Channel as part of your everyday tool set..
  • MULTIPLE MOUNTING HOLES: Complete with two mounting holes, this post base single channel for 1-5/8” struts, supplies you with the tools you need for electrical and construction applications..
  • DURABLE CONSTRUCTION: Find ultimate durability with this post base single channel 2 hole standard made from galvanized steel..
  • LARGE BASE: This post base single channel features a 4-inch by 6-inch base and 2 mounting holes to give you just the right amount of space you need to get the job done..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

uxcell RC Model Airplane Orange Plastic DIY Belt Drive Gear Pulley 20 Pcs

  • Used at stationary or spring pulley positions.
  • 5/16 in. channel, from inside wall to inside wall.
  • Heavy duty galvanized case-hardened steel.
  • Steel ball bearing ensure a smooth and fluid operation.
Check Stock

Thunder Group Work Table Stainless Steel Food Prep Restaurant Supply Worktable 24 X 24 NSF

  • Stainless Steel Work Table Restaurant Food Supply Prep NSF Approved Heavy Duty.
  • Heavy Duty NSF Aprroved Prep Supply Food Restaurant Work Table Stainless Steel.
  • 18 Gauge 430 Stainless Steel Top Galvanized Adjustable Under Shelf Feet Legs Gussets.
  • L Wrench Easy To Assemble Reinforced Hat Channel Frame ABS Feet Legs NSF.
  • NSF Finished Edges Extra Safety Stainless Steel Top Food Restuarant Equipment.
Check Stock

Champion Power Equipment-14560 4500-lb ATV/UTV Wireless Winch Kit

  • Convenient – Operate the winch from anywhere within a 50-foot radius with the wireless remote and antenna, which automatically powers off when not in use to preserve your vehicle's battery.
  • Efficient – The 4500-lb. rated line pull powered by a 1.6-horsepower (12-volt) DC motor has a line speed of 4.6 feet per minute with a full load, and 12.8 feet per minute with no load.
  • Complete Setup – Included wireless remote and antenna, mounting channel, roller fairlead and wiring kit with contactor and mini-rocker handlebar switch create an easier than ever winching experience.
  • Hassle-Free – The roller fairlead creates a safe and smooth pull with the dependable 38-foot galvanized super-duty aircraft cable which is able to withstand abrasive terrain without fraying.
Check Stock

Drainage Trench - Channel Drain With Grate - Gray Plastic - 3 x 39" - (117" Total Length)

  • Low-profile channel drain system for lightweight to medium applications. Dimensions of each channel: 5" W x 3" H x 39" L - (117" Total Length if you choose the 3-PACK Option) Available Colors: Black, Gray and Gray with Galvanized Steel Grate..
  • This Drain Channel System can be connected on multiple bottom positions and side outlets, easy cut out guides. Included Outlet Connector and Adaptor fit 4" sewer and drain pipe. The grates on this system are fully hand-removable for easier cleaning, No screws or bolts..
  • Interlocking connections for a fast and easy installation. Anti-flotation feet stop the channel from moving or floating during the concrete pouring and beds the channel directly on the prepared trench base..
  • Lightweight Polypropylene plastic with structural reinforcements makes these channels tough and durable. Ideal for the multiple applications: Driveways, Gardens, Pools, Sports Courts, Patios, Walkways, Etc. Check installation guidelines..
  • Available in 1-PACK and 3-PACK Kits. All Kits Include: 1 x Bottom/Adaptor Outlet Connector, 1 x End Outlet Conn....
Check Stock

RHKING 4 Wheel Trolley Assembly Roller Trolley 2Pcs Silent M10 Bolt for use with 1-5/8\ Wide and All 1-5/8\ or Taller Strut Channel

  • ✅ Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, M10 (3/8inch) Bolt in the middle, 80mm (3.15inch) in length,Design Load in 770 pound..
  • ✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid alloy steel, which ensures the high strength of the Wheel trolley.Intermediate support of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection.
  • ✅ Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work..
  • ✅ Can used upside down: 3 nuts are prepared in the accessory,so that you can use the dollies upside down..
  • ✅Apply: For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel.
Check Stock