E-Z Lok Externally Threaded Insert 303 Stainless Steel 3/8 -16 Internal Threads 9/16 -12 External Threads 0.515 Length Made in US

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 316 stainless steel threaded inserts machined out of solid steel for strength. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

Sawyer Products SP134 TAP Water Filtration System, Fits Faucets & Hose Bibs, Blue (one Size)

  • Makes bacteria contaminated tap water potable.
  • Ideal for use in rural locations, emergency kits, boil alerts, at campgrounds, festivals, events, in RVs, and for travel.
  • Filter up to 500 gallons of water per day.
  • reusable high-performance 0.1 micron absolute inline filter fits taps 17mm to 20mm (11/16" to 3/4").
  • Removes 99.99999% of all bacteria (salmonella, cholera, and E. coli).
  • removes 99.9999% of all protozoa (such as giardia and cryptosporidium).
  • TAP adapter attaches directly to other Sawyer filters such as MINI, Dual Threaded MINI, Micro Squeeze, and Squeeze Water filter (not included).
  • Includes: TAP filter, backwash adapter, threaded spigot adapter, dual threaded adapter, tap gauge, extension hose for use in a shallow sink.
Check Stock

Brass Ceramic Stem Disc Cartridge Faucet Valve Replacement Quarter Turn 1/2\ for Bathroom Kitchen Tap (1 Pair Hot & Cold)

  • Solid brass body and stem. 20 teeth on spline (top of stem) for handle, stem drilled with M4 threaded hole..
  • Clockwise (Blue) and Anti-clockwise (Red) to turn the tap on..
  • Rubber O ring at the bottom, with threaded collar..
  • Fit for taps of basin in bathroom, kitchen, etc. Suitable for both cold water and hot water..
Check Stock

E-Z LOK - 653-6 E-Z Lok Externally Threaded Insert 303 Stainless Steel/Metric M6-1.0 Internal Threads 3/8 -16 External Threads 10.31mm Length Made in US Pack of 5

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 303 stainless steel threaded inserts machined out of solid steel for strength. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, #10-32 Internal Threads, 5/16\-18 External Threads, 0.315\ Length, Made in US (Pack of 10)

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 1/4\-20 Internal Threads, 7/16\-14 External Threads, 0.437\ Length, Made in US (Pack of 10)

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

Tactical Pen - Multitool - 6 in 1 Tactical Gear and EDC - Tactical Flashlight Bottle Opener Screwdriver 12 Black Refills.. Mens Dad Husband Gifts Christmas Gifts Ideas Gift Boxed

  • Unique Design : Our multifunctional tool pen is made with high-quality, long lasting materials that will stand up to the elements. The threaded design....
  • 6-in-1 Tactical Pen : As a perfect tactical pen, it contains many functions. It has advanced tungsten steel head, LED flashlight, bottle opener,....
  • Multifunctional Tool: LED flashlight, can be used in lighting and strobe modes, easy mode-switch by light taps of button, perfect for camping, hiking,....
  • Higher Perceived Value: Smooth writing & easy to grip,Writes perfectly on most surfaces and is excellent for every day use. That means you can jot....
  • Perfect Gift: If you are looking for a perfect present, then your search will eventually be found here. Perfect for college, university, and law....
Check Stock

ABN Spark Plug Thread Repair Rethreading Set 14mm Metric – Rethreading Tool Kit – Comprehensive Taps Inserts & More

  • REPAIR DEEP-SEATED PLUGS: The ABN Spark Plug Thread Repair Rethreading Set, 14mm Metric – Rethreading Tool Kit is a comprehensive and time-saving kit that incorporates taper and lug taps together with integrated ream to allow you to fix a stripped spark plug threaded port and repair deep-seated plug configurations.
  • VARIOUS APPLICATIONS: High-speed steel (HSS) ST14x1.25 M14x1.25 (14mm thread size) suitable for damaged spark plug threads to clean and rethread spark plug ports with either a tapered seat or a gasket seal type spark plug assembly on a lawn mower, car, or other vehicle engine.
  • Stepped tap ensures correct alignment of cutter in existing spark plug hole.
  • Extension tools allow easy access to the bottom of the plug recess (includes plug inserts).
  • EASY TO USE: Cut a larger threaded hole in cylinder head with tap, screw insert into head, screw plug into insert, use expander to help seat insert by tapping with a hammer.
  • Select insert that covers as much of the plug threads as possible to avoid carbon buildup (this can make unscrewing plug from insert difficult).
  • Use grease on flutes and any cutting tool to catch shavings, clean often, and vacuum when finished (grease not included).
  • EASY STORAGE: Heavy-duty 9.6” x 4.75” x 1.5” inch ....
Check Stock

E-Z LOK - 650-10 E-Z Lok Externally Threaded Insert C12L14 Carbon Steel M10-1.5 Internal Threads 9/16 -12 External Threads 13.08mm Length Made in US Pack of 10

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – C12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14/Metric, M6-1.0 Internal Threads, 3/8\-16 External Threads, 10.31mm Length, Made in US (Pack of 10)

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – C12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z Lok Externally Threaded Insert C12L14 Carbon Steel Meets AISI 12L14/Metric M8-1.25 Internal Threads 1/2 -13 External Threads 12.29mm Length Made in US Pack of 10

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – C12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, M3-0.5 Internal Threads, M6x1.0 External Threads, 6.48mm Length, Made in US (Pack of 10)

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock

E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14/Metric, M12-1.75 Internal Threads, 3/4\-10 External Threads, 16.66mm Length, Made in US (Pack of 5)

  • THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
  • INSTALL WITH STANDARD TOOLS – C12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Check Stock