Categories

Best Performance Brake Hose

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

CooMeng Zoom H876E 2-PIN 4-Pistons E-Bike Electric Power-Off Hydraulic Brake Set with 180mm Rotors Pre-Bled Hydraulic Disc Brake Caliper Lever for eBike/E-Scooter Included Mounting Adapter - Black

  • Powerful braking force: Each brake caliper is equipped with 4 pistons to achieve fast braking and escort every ride..
  • Designed for E-bikes: Equipped with brake automatic power-off sensor, using 2-pin connector. When braking, the power output is automatically cut off to quickly realize braking..
  • Sufficient length of hose: Front brake hose length - 950mm (37.4in), rear brake hose - 1850mm (72.8in). Before purchasing, please confirm the required hose length to avoid the situation that cannot be installed..
  • Larger rotors and More durable pads: The set is equipped with the original 180mm rotors, which have stronger braking performance than 160mm rotors. At the same time, the set is equipped with the original universal pads, which is compatible with SHIMANO BR-M8120/M7120/M6120M8020/M820/M810/M640MT520/MT420.
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Brake Pads 003e All Hardware To Install.
  • Parking Brake Cable Kit: 003e Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission | Flexline Kit: 003e Steel braided brake lines, caliper fittings, and chassis fi....
Check Stock

LIUYE 1000mm-1600mm 28 Degree M10 Hydraulic Brake Oil Hose Line Pipe for Motorcycle Pit Dirt Bike ATV Motocross Street Bikes Sport Bikes (Green 140cm)

  • High performance reinforced Hydraulic Brake Oil Hose Line Pipe.
  • Fit for Most Of Motorcycle Dirt Pit Bikes Motocross Street Bikes Sport Bikes Motors UTV,ATV etc.
  • The diameter of mounting hole is 10mm, two end banjo is 28 Degrees to 28.
  • Package includes: 1 x Brake Oil Hose Line.
  • In order not to cause trouble to you, please confirm the size you need before purchase.
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • [Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
  • [Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
  • [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
  • [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....
Check Stock

Mtsooning 60cm Motorcycle Hydraulic Brake Oil Hose, Universal Clutch Oil Pipe Braided Steel Gas Clutch PVC Tube Replacement for Enduro, Motocross, Street Bikes

  • * Excelent performance- Disc brake conversion tool, directly provide brake pressure to the brake calipers, improve brake sensitivity and braking force, and effectively shorten the braking distance..
  • * Double Protection- The outer layer is PVC wrapped, which is heat resistant.
  • The inner layer is wrapped with stainless steel casing to effectively avoid problems such as tubing expansion and damage..
  • * Superior quality- Use of high quality material to ensure its durability and security.This is a perfect choice if you are in need of a oil hose!.
  • * Easy Installation- Just direct fit it in your engine, easy installation and use..
  • * Wide Application- This Hydraulic Brake Hoses is Suitable for most of the bikes, enduro, motocross..
Check Stock

Tektro HD-e350 eBike Hydraulic Disc Brake with 2Pcs 160/180mm Rotor

  • 【Electric Induction Control System】With power cut-off sensor, when braking, the signal is sent to the electronic control system to power off the motor. Cable length 190mm. Please pay attention to check whether the segment of the wiring port matches..
  • right rear 1850mm. This hydraulic disc brake is only suitable for ebikes. 【Oil】Non-corrosive environmentally friendly mineral oil..
  • 【Caliper】 Forged aluminum body. Open system, 2 piston. Weight Front: 302g / Rear: 322g. 【Brake Lever】:Cast aluminum lever & bracket. Two-pieces clamp. 3 finger blade..
  • 【Rotor】Diameter 180mm. Thickness 1.8mm. Weight 150g each. Lightweight polygonal guide design. High heat dissipation and heat resistance. 【Pads】High-performance metal-ceramic composites, low noise resin pad..
  • Note: the rear calipers and lever came in separate pieces so you can route internally. The brake hose were already filled with brake fluid, so you need to be careful not to spill the brake fluid when you install it..
Check Stock

BJTDLLX Complete Rear Axle Kit with Brake Assembly & Pillow Blocks for DIY Go Kart ATV Quad Buggy Mini Bike (No Chain)

  • 【Material】The rear brake assembly kit of the kart is a high-performance aluminum cylinder with pre-installed brake fluid.
  • the brake disc is made of high-quality steel, which is durable and has a long service life..
  • 【Rear Axle Kit】length is 740 mm/29 inches, disc size is 160 mm x 4 mm/6.3 inches x 0.16 inches, T8F 58T sprocket (without chain). This is a complete rear axle kit for karts..
  • 【Rear Brake Caliper Assembly】with master cylinder and caliper, 61 inches/1550 mm brake hose length. This rear brake assembly should fit most pit bikes made in China..
  • 【Wide Range of Applications】very suitable for DIY karting projects or reconstruction. Suitable for four-wheel ATV off-road karts. Suitable for many 50cc 70cc 90cc atv quad bikes, karts, such as atomik, motowork, DHZ, LEI, etc..
  • 【Package Content】rear axle kit + brake assembly + a pair of pillows (without chain). (Package size: 30'' x 8'' x 3'', shipping weight: 12lb)..
Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

Sunsong 2203199 Brake Hydraulic Hose

  • Each brake hose is precision engineered to exact fit and includes brackets, grommets, molded plastic guards, wire clips, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
  • Brake hoses exceed DOT, Federal Vehicle Safety Standards (FMVSS 106) and SAE J1401 standards with a burst pressure rating of 8,700 psi, and a tensile strength of 560 lb. Durability test (Whip test) results exceed original equipment requirements by 300%.
  • All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
  • Every brake hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing.
Check Stock

ARES 70923-1-Liter Vacuum Brake Fluid Bleeder - Hanging Hook and Locking Trigger Allows for Hands Free Operation

  • ITEM SPECIFICATIONS: This Brake Fluid Bleeder uses a standard workshop air supply and features a working pressure of 71-113 PSI with a maximum pressure of 113 PSI..
  • CONVENIENCE: Our 1L Vacuum Brake Fluid Bleeder features a convenient hanging hook and locking trigger that allows for hands free operation..
  • TRANSPARENCY: The transparent drain hose allows you to visually inspect the old fluid during the draining process. You can easily flush your entire disc or drum brake system with this brake fluid bleeder!.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES 1L Vacuum Brake Fluid Bleeder, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization..
Check Stock

48V1500W Electric MTB Bicycle E Bike Hub Motor Conversion kit MTX Rim theebikemotor (26", Rear Wheel + TFT Display)

  • ...o be replaced. You may find it a gift option to your husband, wife, boyfriend, girlfriend, or gift for your kids' bike for back to school gift, Christmas gift, Valentine's day gift, Mother's day or Father's day gift, thanksGiving gift or New year gifts.
  • - Ourstanding Performance, Brakes = Safety, assembled as Left for Front,reach adjustable, including B01S resin pads, alway measure your existing brake hose length for appropriate size. People still using cable mechanical disc brakes,time to upgrade with this affortable Hydraulic Brake, the difference is night vs. day, a customer avoided a 25mph accident with our brakes.
  • - We Support Business, We offer business price for bike bicycle shops, schools, rider team, just place bulk order and replace the brakes for your other family bikes, recommend to your community, we love to be your business partners and trusted vendors.
  • - Match DIY Options, find rotors or bleeding kits for your brakes, find mtb pedals, cassette, single chainring from store page, even groupset to build your bike. We commit for the most affortable bicycle parts to improve your performance and experience!....
Check Stock

SHIMANO Bicycle Disc Brake Assembled Set - BR-M8100-KIT Rear

  • Brakes are pre-bled, Includes metal pads and hose.
  • BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding.
  • Servo Wave Action technology means quicker brake engagement with shorter free stroke.
  • The BR-M8100 2-piston brake caliper is optimized for cross country riding styles.
  • Brake Lever Use: Right // Hydraulic Hose Length: 1700.
Check Stock