Categories

Best Permanent Radiator Stop Leak

Bar's Leaks 1186 Liquid Aluminum Stop Leak - 16.9 oz , Gray

  • Bar’s Leaks Liquid Aluminum Stop Leak seals radiator leaks. Seals freeze plug leaks. Repairs gasket leaks and heater core leaks. Lowers water temperature..
  • Special Shipping Information: This item cannot be returned and has additional shipping restrictions.
Check Stock

BlueDevil Transmission Sealer

  • Permanent Coolant Leak Repair - Just Shake, Pour And Go.
  • Fixes Cracks And Leaks In Radiator, Head Gasket, Freeze Plugs, Cylinder Heads, Heater Core, Water Pump Casing And Engine Blocks.
Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check Stock

K-Seal ST5516 HD Multi Purpose One Step Permanent Coolant Leak Repair

  • Permanent coolant leak repair – Just shake, pour and go.
  • Fixes cracks and leaks in radiator, head gasket, freeze plugs, cylinder heads, heater core, water pump casing and engine blocks.
  • If product did not seal head gasket leak, the system might be Over-pressurized, which causes back pressure and doesn’t allow the product to reach the problem area, on this page below under Technical Specification is a PDF Guide with instructions to follow to complete the repair successfully.
Check Stock

BlueDevil Pour-N-Go Head Gasket Sealer - 16 Ounce 00209 by BlueDevil Products

  • Permanent Coolant Leak Repair - Just Shake, Pour And Go.
  • Fixes Cracks And Leaks In Radiator, Head Gasket, Freeze Plugs, Cylinder Heads, Heater Core, Water Pump Casing And Engine Blocks.
Check Stock

K-Seal ST5501 Multi Purpose One Step Permanent Coolant Leak Repair, Blue

  • Permanent Coolant Leak Repair - Just Shake, Pour And Go.
  • Fixes Cracks And Leaks In Radiator, Head Gasket, Freeze Plugs, Cylinder Heads, Heater Core, Water Pump Casing And Engine Blocks.
Check Stock

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

  • ...ter in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • Wide Application: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible for Cadillac, B....
Check Stock

JIFETOR Radiator Pressure Leakage Tester Tool Kit, 14PCS Automotive Cooling System Water Tank Leak Test Detector Set with Aluminum Hand Pump and Adapters

  • ...bishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab and so on. All these adapters are color coded, number marked and placed exclusively, can be easily selected according to the marked number in instruction, convenient and no confusion. Check if the adapter caps are suitable when get the kit.
  • HAND PUMP LEAK DETECTOR: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly. The flat operation handle design is more convenient for palm to force..
  • EASY TO OPERATE: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that there isleakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • SATISFACTORY CUSTOMER SERVICE: The included stainless steel thermometer with i....
Check Stock

Liqui Moly 20132 Radiator Stop Leak, 0.25 l, 1 Pack

  • LIQUI MOLY Radiator Stop-Leak completely seals such leaks immediately with ease. .
  • Secures the combustion chamber from damages caused by coolant admission.
  • For all cooling water and heating systems with and without water filters.
Check Stock

Liqui Moly 8956 Radiator Stop-Leak - 150 ml

  • LIQUI MOLY Radiator Stop-Leak completely seals such leaks immediately with ease. .
  • Secures the combustion chamber from damages caused by coolant admission.
  • For all cooling water and heating systems with and without water filters.
Check Stock

Make Auto Parts Manufacturing Front Under Radiator Support Undercar Shield Plastic Material For Ford Fusion 2010-2012 - FO1228114

  • Johnsen's 4918 Radiator Stop Leak - 12 oz..
Check Stock

J-B Weld 2120 Radiator and Plastic Repair Kit

  • RADIATORWELD: Our radiator and plastic tank repair kit has all you need for making professional quality, permanent repairs with state of the art components and easy to follow instructions..
  • COUNT ON US: For more than 40 years, our products have earned a loyal following from people who take pride in their work. With each product we innovate, we continue to provide the world's strongest bond for your projects..
  • SIMPLE TO USE: No removal of tank or radiator is required to stop leaks. Easily fix holes up to 3/8" diam. or cracks up to 4" long. Includes epoxy putty, fiberglass cloth, sandpaper, and applicator..
  • VERSATILE & DEPENDABLE: Great for radiators, washer fluid tanks, storage tanks, water tanks, plastics, composites, PVC and more. Professionals, mechanics and avid DIYers know J-B gets the job done..
  • NO PROJECT TOO BIG OR TOO SMALL: We have all the products you need to get the job done right. JB Weld always delivers the legendary performance of the World's Strongest Bond..
Check Stock

OTC Water Pump Holding Tool

  • Coolant pressure tester kit includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1 universal cone rubber adapter, to connect almost all types of radiator openings on the domestic and imported vehicles, help to check the leak of water tank and fill the coolant under vacuum environment. There are also 3PCS radiator cap adapters and 2PCS connectors for testing the leakage of the radiator caps..
  • Manual vacuum pump pressure checker uses high quality aluminium cylinder, much harder than regular plastic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other dam....
Check Stock