Categories

Best Petrol Bicycle

8mm Universal Pulley Chain Roller Slider Tensioner Wheel Guide for Motorcycle Pit Dirt Mini Bike Atv Red

  • ◇ 【Strong Function】-- Specially designed with the swing arm.
  • the chain then runs over it to keep it aligned.
  • ◇ 【Suitable Fitment】-- Inner diameter: 8 mm, can also be used on gas petrol motorized bicycle conversions kits.
  • ◇ 【Convenient Use】-- The chain roller wheel complete with heavy duty bearings very easy to use.
  • ◇ 【Good Quality】-- This Pulley Chain Roller is made from the high quality materials, sturdy and durable for long time service.
  • ◇ 【Warm Prompt】-- 8 mm Inner Diameter, Please check the size and confirm this chain roller meet your need.
Check Stock

Iglobalbuy 50cc/ 80ccBicycle Engine Kit 2-Stroke Cycle Petrol Gas Motor Engine Kit for Motorized Bicycle 26\/28\ Bike (black) (80cc)

  • The 2-stroke petrol engine mixing Ratio of Fuel(90#) and Engine Oil: 16: 1 for New sets, 20: 1 after Running 500Km..
  • This 50cc/80cc bicycle engine easy to install. The rider only needs some basic hardware skills, tools, and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation)..
  • Fits Most 26"&28'' Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • To start the 2-stroke engine, move the choke lever to "on" position, hold in clutch, pedal the bike to get some speed, and then release the clutch gradually..
  • To stop the 2-stroke engine, choke the carburetor completely with the lever on the carburetor. Alternatively, slow speed, hold in clutch and press the kill switch on twist-grip throttle.6. If you want to use your bicycle as a common bike, just disengage clutch, then press the silver button at the side of clutch, the motor will not be started..
Check Stock

SUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red

  • Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

Universal Pulley Tensioner Chain Roller 10mm Chain Roller Slider Tensioner Wheel Guide for Motorcycle Pit Dirt Mini Bike Atv Blue

  • 【Strong Function】-- Specially designed with the swing arm.
  • the chain then runs over it to keep it aligned.
  • 【Suitable Fitment】-- Inner diameter: 10mm, can also be used on gas petrol motorized bicycle conversions kits.
  • 【Good Quality】-- This Pulley Chain Roller is made from the high quality materials, sturdy and durable for long time service.
  • 【Convenient Use】-- The chain roller wheel complete with heavy duty bearings very easy to use.
  • 【Warm Prompt】-- 10 mm Inner Diameter, Please check the size and confirm this chain roller meet your need.
Check Stock

Bicycle chain tensioners - Mini Bike Chain Tensioner 10mm Chain Roller Slider Tensioner Wheel Guide Pit Dirt Mini Bike Moto Atv Blue

  • 10mm Drive Chain Roller --- This pulley tensioner chain roller can also be used on gas petrol motorized bicycle conversions kits. Vary colors for you....
  • Size --- Inner Diameter: Approx. 10mm / 0.39". Outside Diameter: 3.5cm / 1.38". Total Length: 3.3cm / 1.3" for mini bike wheels.
  • the chain then runs over it to keep it aligned for tires for 80cc motorized bike.
  • With Heavy Duty Bearings --- Dirtbike nylon chain roller wheel complete with heavy duty bearings ready to use for 33mm chain tensioner roller.
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every product must go through strict....
Check Stock

STP Gas Treatment (3 pack)

  • STP Car Petrol Treatment 200ml (CLO51200EN) New..
  • STP Petrol Treatment used regularly helps save fuel by keeping fuel intake systems clean of harmful deposits.
  • fight rust and corrosion in the fuel system.
  • reduce exhaust emissions. Use every 1000 miles / 1600 kms. Safe to use with other STP additives..
  • Suitable for all classic and modern engines, catalytic converters..
Check Stock

FEWENi 80cc 2 Stroke Bicycle Engine Motor Gas Motorized Bike Motor Kit

  • Ambienceo 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,which enable you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
  • The bicycle engine kit fits most 26" or 28" wheeled bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 5 horsepower/6000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting..
Check Stock

Froiny 2l Oil Petrol Fuel Mixing Bottle Stroke Tank for Chainsaw Trimmers Lawn Mowers Line Strimmers 16x7.3x16.7cm

  • Easy to pour spout and separate filling points for petrol and oil.There are two parts of the container, the large part is for gasoline and small part....
  • For using with tools with 2-stroke petrol engines, such as chainsaws, lawn mowers, line strimmers etc.
  • Clear graduation marks for ratios 50:1 and 25:1.For using with tools with 2-stroke petrol engines, such as chainsaws, lawn mowers, line strimmers etc..
  • You only need to find the corresponding vertical surface according to your needs. The oil part has a scale of 25:1 50:1, both parts have 1 liter and....
  • 2L Oil Petrol Fuel Mixing Bottle Tank 2 Stroke For Chainsaw Trimmers 1:25 50:1.Made of high quality material, durable and practical to use..
Check Stock

Electric Fuel Pump Assembly for Ram 1500 2012 Ram 2500 2011-2018 Ram 3500 2013-2017

  • YHTAUTO Affordable and Prime Fuel Pump Module Assembly, Directly Fit.
  • Ram 2500 2011-2018 V8 5.7L, 2014-2018 V8 6.4L Petrol.
  • Fits Ram 3500 2013-2017 V8 5.7L, 2014-2017 V8 6.4L Petrol.
  • Reference Number: 4792870AB, 5145587AC, 68086502AA, E7275M, 375GE, FG1432.
  • 1 year unlimited-mileage quality guarantee.
Check Stock

Motorized Bicycle Kit Bike Engine Kit Single Cylinder 49CC 4-Stroke 142F Air-cooled System w/Double Chain Drive Fits normal 28” V frame bike and 26” ATV bike US Stock

  • 【PROFESSIONAL ENGINE KIT】49cc 4 stroke pull start petrol conversion kit for adult bicycles, ideal for convert most traditional hand bicycles into....
  • 【MORE STABLE & HIGH SPEED】4 stroke engines are more stable, more reliable and quieter than the 2 stroke rivals. You can use it in any outdoor....
  • 【SAFE & FUEL-EFFICIENT】 GDAE10 bicycle gasoline engine kit uses a safe capacitor discharge ignition method, so you can use it safely. With 44....
  • 【MAIN PARAMETERS】Engine Model：142F.
  • Engine Type：Air-cooled, 4-Stroke, OHV, single cylinder.
  • Bore x Stroke：41.8 x 36 mm (1.65 x 1.42 in).
  • 【PACKAGES INCLUDES】1 x Quality 49cc 4 stroke engine.
  • 1 x Gas tank,Plastic gasoline fuel line,fuel value.
Check Stock

80cc Bicycle Engine Kit 26' 28' Bicycle Motor Engine Kit 2 Stroke Gas Motorized Bike Motor Kit Upgrade Silver

  • Bicycle 26 & 28 inch: Fits for most 26″ or 28′ wheeled bikes with V-frame. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″).
  • 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

Diesel Fuel Filter for VW Golf Jetta TDI HENGST Made in Germany

  • Applicable Engine: Injector removal tool kit compatible with Volkswagen 1.2, 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compatible with Audi VW TDi 4 cyl 8V 16V Engine.
  • Compatible with Diesel and Petrol Engine: Specially designed for removing and installing of high pressure injector and combustion chamber seal, this professional replace fuel injector tool kit compatible with Volkswagen petrol and diesel engine, compatible with Audi, compatible with Seat, compatible with Skoda.
  • Easy Removal Install Fuel Injector: This tool have multiple different size and shap injector puller, they can compatible with Volkswagen different engine, it's easy pull out injector with slide hammer.
  • Replace Injector Seals: This kit include injector oil seal install tool, help you to reseal and reinstall fuel injectors.
  • Combinate Kit: This kit include different diesel petrol injector puller, slide hammer, injector oil seal reinstall tool, injector brush, this case have all the tools for replace fuel injector.
Check Stock

Yuesstloo Engine Camshaft Timing Locking Tool Kit, Compatible with Jaguar Land Rover Evoque 2.0T Ford Focus 2.0 Ecoboost Ti-VCT Mondeo Focus, Replace 303-1504 303-1595, with Carrying Case & Gloves

  • Yuesstloo Engine Camshaft Timing Locking Tool Kit is used to check and lock the camshaft of petrol injection engines. Help you align camshafts, set crank sensor and balancer, adjust crankshaft in the correct TDC position. Simplify engine work and complete work correctly and efficiently..
  • The timing tool compatible with Jaguar Land Rover Evoque Ford Mondeo 2.0T Engine. Works for 2.0L Duratec-HE (MI4) Petrol, 2.0L EcoBoost GTDI (MI4) Petrol, 2.0L ST EcoBoost GTDI - (MI4) Petrol, Focus (2011.2), Galaxy (2006.5), Mondeo (2007.5)..
  • Replace OEM Equivalent Part Number: 303-1600.
  • 303-1504. Works on the engine code: TNWA, TNWB, TPWA, TNBA, MGDA, XQDA..
  • The camshaft timing tool is made of high-quality steel, coated with black antioxidant layer, strong hardness, durable to use. Comes with a portable heavy-duty case, all parts are neatly placed, and have a pair of gloves can be worn when using tools. Convenient to operate and store, easy to transport and organize..
  • 100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority..
Check Stock