IWISS F2098 Ratchet One Hand PEX Cinch Clamp Fastening Tools for Clamping Pipe Tubing 3/8 1/2 3/4 5/8 and 1 Easy Operation Stainless Steel Clamps with Holster

  • Purpose: BJ0010C PEX cinch tool is designed for the creating secure stainless steel pinch clamp connections in combination with PEX barb fittings....
  • One Hand Operation: One-handed gripping keeping the other hand free to hold a flashlight, ladder or pipe..
  • Secure Connection: The clamp tool will not release from the clamp ring unless a properly-secured connection has been made. The tool is factory....
  • Applications: Ideal for use in tight spaces such as manifold installations, under closet potable water plumbing..
Check Stock

VIVO 2 Loop 1/2 inch Pex Manifold Stainless Steel Radiant Floor Heating Set | 2 Branch Kit (PEX-M12-2)

  • 2 Loop Manifold, commonly used for radiant floor heat systems.
  • 1/2″ Compression Connectors. If using 5/8″ tubing, please see info for PEX-M12-58A adapter below.
  • *Note: Not compatible with SharkBite brand pex fittings.
Check Stock

IWISS Combo Angle Head Pex Pipe Plumbing Crimping Tool for Copper Crimp Jaw Sets 1/2 & 3/4 with Go/No-Go Crimp Gauge

  • 2-IN-1 PEX Crimping Tool: IWS-1234W PEX crimp dual tool allows you to make a secure connection to 1/2 In. and 3/4 In. PEX with copper crimp rings..
  • Compact Design: The angled head allows easier access to connections in tight spaces. There are no loose components, jaws to change, or adjustments to....
  • Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass....
  • Secure Connection: Connections may be checked for security using the Go/No-Go Gauge (included). Each clamp ring shall be gauged to ensure that it has....
  • Applications: Ideal for use in tight spaces such as manifold installations, under closet potable water plumbing..
Check Stock

Yescom PEX One Hand Cinch Clamp Tool Ratchet Clamping Pinch Wrench Crimper 3/8″ to 1″ Stainless Steel Pinch Clamp ASTM

  • ...r grip for comfortable holding and reducing fatigue, accommodate gloved and bare hands.
  • [Calibration & Wide Application]: Allen key for adjusting the jaw gap and calibration gauge with 1.4mm side and 1.2mm side for measuring the jaw space.
  • widely used for using in tight space such as PEX tubing connection, plumbing, manifold installation and water heater solution.
Check Stock

ATOLS 1632AF Copper Tube Fittings Crimping Tool with 1/2, 3/4 and 1-Inch Crimper Interchangeable Jaws, Copper Pipe Pressing Tool Kit with Cutter & Deburring Tool for Pro-Press Copper Fitting

  • 2-IN-1 PEX Crimping Tool: IWS-1234W PEX crimp dual tool allows you to make a secure connection to 1/2 In. and 3/4 In. PEX with copper crimp rings..
  • Compact Design: The angled head allows easier access to connections in tight spaces. There are no loose components, jaws to change, or adjustments to be made to create a connection..
  • Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly(PPSU) PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Apollo, etc.)..
  • Secure Connection: Connections may be checked for security using the Go/No-Go Gauge (included). Each clamp ring shall be gauged to ensure that it has been crimped properly and for the accuracy of the tool..
  • Applications: Ideal for use in tight spaces such as manifold installations, under closet potable water plumbing..
Check Stock

AB Radiant PEX 1/2" Manifold Connector/Adaptor/Tubing Nuts (Pack of 10)

  • We have 1/2″ and 3/4 ” for all loops and radiant/Pex Manifold..
Check Stock

PEX Manifold Radiant Floor Heating Set 3 Loop System Stainless Steel Heated Hydronic Heating For 1/2" Oxygen Barrier Tubing

  • ★HIGH QUALITY CONSTRUCTION: Made of Stainless Steel and Chrome plated our Radiant PEX manifolds are sturdy and very durable. It easily resists corrosion and provides durability.
  • ★ALL-IN- ONE: Each manifold comes with Flow Meters, Shut-Off Ball Valves, Drain/ Fill Valves, and compression connectors.
  • ★EASY INSTALLATION: Our manifolds comes with their own heavy duty mounting brackets making them easily attachable to any wall. They come pressure tested and pre-assembled.
  • ★COMPATIBILITY: Our manifolds are perfect for Size 1/2 Inch Radiant Heat PEX tubing. (Not recommended for potable water).
  • ★30-DAY MONEY BACK GUARANTEE: Your satisfaction is always our priority. For whatever reason you are unhappy with the product you can simply return the item. No questions asked.
Check Stock

PEX Manifold Radiant Floor Heating Set 6 Loop System Stainless Steel Heated Hydronic Heating For 1/2" Oxygen Barrier Tubing

  • ★HIGH QUALITY CONSTRUCTION: Made of Stainless Steel and Chrome plated our Radiant PEX manifolds are sturdy and very durable. It easily resists corrosion and provides durability.
  • ★ALL-IN- ONE: Each manifold comes with Flow Meters, Shut-Off Ball Valves, Drain/ Fill Valves, and compression connectors.
  • ★EASY INSTALLATION: Our manifolds comes with their own heavy duty mounting brackets making them easily attachable to any wall. They come pressure tested and pre-assembled.
  • ★COMPATIBILITY: Our manifolds are perfect for Size 1/2 Inch Radiant Heat PEX tubing. (Not recommended for potable water).
  • ★30-DAY MONEY BACK GUARANTEE: Your satisfaction is always our priority. For whatever reason you are unhappy with the product you can simply return the item. No questions asked.
Check Stock

Exchilerator Ready To Brew - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counter Flow Wort Chiller

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo).
  • READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included).
  • 5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • 【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....
Check Stock

RIDGID 43858 3/4-Inch ASTM F 1807 Close Quarters Manual PEX Crimp Tool

  • 【HIGH QUALITY】This PEX Clamp Tool is made from durable high quality material steel with forging process to ensure integrated mechanical property and long service life. Pex clamps made from high quality 304 stainless steel..
  • 【UNIVERSAL】Meets ASTM 2098 standard. Compatible to work with all brand stainless steel clamps with sizes 3/8", 1/2", 5/8", 3/4" and 1"..
  • 【DURABLE】The stainless-steel clamp rings provided in this cinch clamp tool kit resist corrosion more effectively than other crimp rings, which can be a major benefit in direct-burial applications..
  • 【EASY TO USE】PEX Crimp Tool features a comfort grip which makes PEX installation easier. It is suitable for making copper crimp ring connections in potable water lines, radiant heat, snow melt, ice rink systems and among other applications..
  • 【PACKAGE INCLUDES】1pc x PEX Clamp Cinch Tool, 10pcs x 3/8" PEX Clamps, 15pcs x 1/2" PEX Clamps, 10pcs x 3/4" PEX Clamps, 5pcs x 1" PEX Clamps..
Check Stock

TICONN 70PCS PEX Clinch Clamps Kit, 304 Stainless Steel PEX Clamp Rings for PEX Pipe Tubing Connection (70CPS Kit)

  • [PREMIUM QUALITY] – The PEX fittings Clamp are made of thick premium 304 stainless steel with smooth edge. The ring clamp will seal the pipe 360° tightly. The stainless PEX rings provide excellent corrosion and rust resistances when used in harsh conditions..
  • [SIZE RANGE AND QUANTITY] – The PEX kit contains 70 pcs PEX pipe clamps include 12 pcs 3/8'', 20 pcs 1/2'', 12 pcs 5/8'', 20 pcs 3/4'' and 6 pcs 1'' PEX rings..
  • [WIDE APPLICATIONS] – The PEX pipe clamp can be used to secure PEX tubing with PEX crimping tool for home plumbing, garden, hydronic heating and air conditioning system. This clamp set contains vary diameters that meet your needs for different applications..
  • [STAY ORGANIZED] – The PEX tool kit assortment come within a storage box, easy to store and carry. The size range is engraved on each PEX clamps which makes it easy to identify the right size of the tube clamp..
  • [TICONN BRAND QUALITY COMMITMENT] – We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12-month warranty. 100% Satisfaction Guarantee for risk-free shopping!.
Check Stock

IWISS Angle PEX Crimping Tools Combo Kits for 1/2\ & 3/4\ Pex Crimp Rings with Go/No-Go Gauge with PEX Pipe Cutter Suits for All US F1807 Standards Copper Rings

  • All-in-One PEX Piping Tool Kit: IWS-1234C PEX plumbing kit is designed to make copper crimp ring and copper sleeves connections in sizes 1/2-inch to 3/4-inch. The tool set includes PEX crimping tool(1), PEX cutter(1), 1/2’’ copper crimp ring(20), 3/4’’ copper crimp ring(10)..
  • Patented Copper Crimp Ring: Annealed copper crimp rings are used to secure PEX piping to F1807 Brass or PPSU fittings. Designed for longevity and durability..
  • PEX Crimping Tool: Dual cavity plumbing PEX crimping tool for PEX Copper Crimp Rings 1/2" & 3/4". Allows for a one-handed crimp. Angle head design is useful for working overhead and in tight areas as it easily fits between joists. .
  • PEX Cutter: Shear cutter tool ideal for cutting tubing for water applications. Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. Cuts through PEX tubings like butter..
  • Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Apollo, etc.)..
Check Stock