Categories

Best Pex Pipe Fitting

LOKMAN 50 Pack 1/2 Inch PEX Cinch Clamps, Stainless Steel Cinch Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (1/2 Inch)

  • HIGH QUALITY- 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion, construction..
  • 360 °SEAL PROTECTION - These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using system..
  • WIDELY USED- Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • WIDELY APPLICATIONS - Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
  • SIZE - 1/2 inch (17.5mm) PEX cinch clamp rings, fit for 1/2 inch PEX pipe..
Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • 【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....
Check Stock

Pex Ring Removal Tool with Pex Pipe Cutter - Removes 1/2' -1' Pex Rings (Forging Process) with Pex Pipe Cutter

  • Pex Ring Removal Tool Cuts Pex Copper Crimp Rings in sizes 3/8″ to 1″.
  • Allows Removal of Improperly Crimped Pex Crimp Rings or Disconnect the pipe and fitting.
  • Come with Free Metal Structure Pex Pipe Cutter.
Check Stock

PEX Pipe Plumbing For Beginners: Complete Guide To Plan, Design, Install And Maintain PEX Plumbing Systems

  • Directly from One of the Biggest Pex Systems Manufacturers.
  • NSF Certified Pex Pipe/Tubing 1/2" Blue and Red 100 ft x2 Rolls for Potable Water.
  • Pex Crimp Lead Free Brass Fitting 1/2" coupling, Elbow, Tee 5 PCS/each -15 PCS.
  • Pex Cinch Clamp Tool with 50 PCS Stainless Steel Cinch Clamps.
Check Stock

60 Pack 3/4 Inch Pex Expansion Rings Sleeves F1960 Pex A Fittings Pex Expansion Tool with Stop for Pex a Piping System

  • Compatibility: these pex crimp rings are made of PEX A material, designed for Pex A pipe and fitting connections only.
  • Safe Use: through ANSI/NSF-61 and ASSE 1061 product standard certification, the pex expansion tool is safe and reliable, to ensure that you can use it with confidence.
  • Set of 60: you will get 60 3/4 pex crimp rings, enough to make your purchase one off for ongoing demand.
  • Ease of Use: there is an end stop, the pex expander tool to help locate for proper installation, simple and practical.
  • Reliable and Tight: the pex sleeve has a strong memory function, which can always maintain a close fit with the pipe connection, and can provide a strong connection function without auxiliary tools such as glue and solder.
Check Stock

SharkBite 24947 Plumbing Straight Stop, Metal 1/2' x 1/2'

  • PEX CLAMP TOOL: Time and cost savings in combination with SharkBite PEX Stainless Steel 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch Stainless Steel Clamp Rings.
  • FAST: No waiting for glue to dry or joints to cool.
  • USE: Works in conjunction with PEX Stainless Steel Clamp Rings, PEX Barb Fittings and PEX Pipe Tubing.
  • ASSURANCE: PEX Clamp Tool will not release until a secure connection is made removing the need to check each fitting with a go/no go gauge.
  • RESIDENTIAL and COMMERCIAL: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

(Pack of 10) EFIELD Pex A Full Flow Expansion Brass Fitting 3/4'x 3/4' Elbow ONLY For Pex-A Tubing Connection, ASTM F1960, Lead Free

  • This Efield Product is Compatible with all Types of Brands of Pex A Pipe/Tubing, Uponor(Wirsbo), Sious Chief, Etc..
  • Certified to ANSI/NSF-61 and ASSE 1061 Product Standard.
  • This Efield Product is Compatible with Expanding Fitting System, NOT Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems.
  • Only for Pex A Pipe/Tubing Fitting Connection.
Check Stock

1/2'' Pex Expansion Fittings Kit 100 PCS, LIONMAX Poly Pex A Fittings with Expansion Rings, include Elbow(10 PCS)+Tee(10 PCS)+Coupling(10 PCS) +Expansion Sleeves(70 PCS), Lead Free

  • Directly from One of the Biggest Pex Systems Manufacturers..
  • Includes: 1/2-inch Pex-A Tubing 100 ft Blue +100 ft Red , Pipe Cutter, 30 PCS 1/2-inch Pex Lead free Brass Expansion Fitting (Coupler, Elbow, Tee 10 PCS/each), 100 Pcs 1/2-inch Expansion Rings.
  • EFIELD Pex A is Most Flexible Tubing for Potable Water and Plumbing Application. The Pipe Can be Expand for the Connection.
  • Recommended Connection For Full Water Flow: Expansion Connection (Need to Order Expansion Tools).
  • Meets Standards: ASTM F876, F877, F1807, F1960, F2023, F2080 and F2169.
Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

  • 【Package Includes】1 pcs disconnect tongs tool.
  • 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
  • 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
  • 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
  • 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check Stock

SharkBite 1/2 Inch Clamp Ring, Pack of 100, Stainless Steel Plumbing Fitting, PEX Pipe, PE-RT, UC953CP100

  • EASY INSTALLATION: Slide the 1/2 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool.
  • COMPATIBILITY: Use with brass or poly PEX crimp fittings, PEX or PE-RT pipe and clamp tool.
  • QUALITY: SharkBite's quality and performance is field-proven and is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • PREFERRED BY THE PRO: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

Highcraft PXBND12-10 PEX Bend Support 1/2 in, Wall Mount Tubing Pipe Hanger 90 Degree with Nail Plate, Polyethylene (10 Pack), Black

  • ✔ULTRA SECURE FIT PEX HANGER: Provides Rigid 90° Bend Support for PEX Tubing Running Next to Wall or Beam.
  • ✔EASY INSTALLATION: Reduce Labor Costs Significantly With This High Performance PEX Angle Support. No Tools, Soldering, Or Crimping Required. Just Nail The Mounting Plate To The Surface (Pre-Drilled Holes For Added Convenience), And Click The PEX Tubing Into The Fitting. It’s As Easy as That! Can Be Removed And Reused Multiple Times..
  • ✔SMOOTH PLASTIC CONSTRUCTION: Reduces Noise, Vibration, Kinks, Over Bending and Water Flow Restriction.
  • ✔DIMENSIONS: 5 in. Long, Fits 1/2 in. PEX Pipe, with Nail Plate with 2 Pre-Drilled Holes (Nails Not Included).
  • ✔THE PEX REVOLUTION: PEX Is The Preferred Choice For Water Supply And Hydronic Heating Applications, Featuring Decreased Cost, Quicker Installation, Flexibility, Durability, Freeze Resistance And Corrosion Resistance! !.
Check Stock

ISPINNER 15pcs 1/2 Inch Stainless Steel PEX Cinch Clamps, Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections, Pack of 15

  • HIGH QUALITY MATERIAL - Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties..
  • 360-Degree SEAL PROTECTION - These interlocking rings form a complete 360- Degree watertight seal, provide reliable and fast connection of all PEX pipes fittings..
  • WIDE APPLICATION - Widely used in all plumbing system, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing etc..
  • EASY INSTALLATION - Slip these pex clamps over the tubing, then slip tubing onto insert fitting. Use the correct cinch tools to close the clamp ear until it is fully engaged. Providing a strong, leak-free and reliable crimp fitting connection..
  • SIZE - 1/2 inch PEX clamps, fit for 15.0-17.5mm outside diameter pipe. Width x Thickness of 1/2 inch clamp is 7.0 x 0.8mm..
Check Stock

PEROMI 170 Pcs Single Ear Hose Clamp 11 Sizes 1/4-1 Inch Stepless Stepless Cinch Rings Crimp Assortment Kit for Water Pipe Plumbing and Automotive Use

  • [Include Size]This fuel line clamp kit set comes with 7 common sizes: 6-7mm, 7-8.7mm, 8.8-10.5mm, 9.6-11.3mm,9.8-12.3mm, 12-14.5mm, 13.7-16.2mm,15.3-18.5mm, 17.8-21mm, 20.3-23.5mm, 22.4-25.6mm,all size of tube clamp packed in a sturdy convenient case, can be used for a storage box..
  • [Premium Quality] High precision single ear stepless hose clamps are Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, a good choice for long-term use.Hose clamps are used to seal various types of hoses..
  • [Leak-Proof] These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. Great secure in any PEX pipe using..
  • [Easy to Use] The slide the clamp ring onto the pipe, push the pipe onto the fitting and squeeze it with a clamp tool. Provide a firm, leak-free and reliable crimp joint connection..
  • [Application] Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application..
Check Stock