Categories

Best Ph Electrode

Hanna HI70300 - 500mL bottle of Electrode Storage Solution, Presented by Magnum Media

  • Always keep the glass bulb and the junction of your pH electrode moist.
  • Store the electrode with a few drops of HI70300 storage or pH7 buffer solution in the protective cap.
Check Stock

5 in 1 PH Meter, TDS/EC/Salinity/Temp/PH Meter for Water, Digital PH Tester 0.01 High Accuracy Water Testing Kits for Drinking Water, Pools, Fish Tank, and Hydroponics, PH Pen Hydroponics Supplies

  • ...r is designed with 5-in-1 function, which can be measured PH, TDS, EC, SALITY, and TEMPERATURE. Satisfy all your testing requirements and fully test water quality! Get Healthy Pure drinking water or other use water with this 5 in 1 pH meter..
  • [ Easy to Use ] : Just dip the electrode in the target solution then press and hold the MODEL / CAL button for 6 seconds after the readings to stabilize(usually 5~10 Seconds) and the ph meter will automatically calibrate. Digital pH meter uses a 3-point calibration method, calibrating the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18,You can calibrate effortlessly to ensure the accuracy of your measurements..
  • [ High Accuracy & Reliable ] : ±0.01 pH accuracy, 3-point calibration and 0-14 measure range of the digital ph meter sure you get a accurate testing result. High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response..
  • [ Pocket Size & Backlight LCD Design ] : Everyone could use this pocket size small but powerful Pen Tester, device to measure your aquarium, pool, fish tank and pond in a garden. And pH meter feature....
Check Stock

Hanna Instruments HI70300L pH/ORP Electrode Storage Solution, 500mL (16.9oz) Bottle

  • To minimize clogging and ensure fast response time, always keep the glass bulb and the junction of your pH electrode moist.
  • Store the electrode with a few drops of HI70300 storage solution in the protective cap.
Check Stock

Apera Instruments, LLC-AI533 PC820 Precision Benchtop pH/Conductivity Multiparameter Meter Kit with Highest Accuracy ±0.002 pH and ±0.5% F.S, up to 5-Point Auto. Calibration

  • The Swiss LabSen 211 pH Combination Electrode and Precision BPB 2401T-F Glass Conductivity Electrode ensure highly stable & accurate pH and conductivity measurements.
  • Quick and Easy auto calibration up to 5 points with calibration guide and reminder function (premixed standard solutions included).
  • Slope display between calibrations helps you monitor the health of your pH electrode.
  • GLP Data management (500 groups of data storage) with USB data output.
Check Stock

Extech PH100 ExStik pH Waterproof Meter

  • Flat surface pH electrode is waterproof and rugged enough to withstand harsh environments.
  • LCD display shows pH from 0.00 to 14.00, temperature and bargraph of trends in acidity or alkalinity.
  • device stores and recalls up to 15 labeled....
  • RENEW feature tells you when it and' time to replace your pH electrode.
  • CAL feature tells you when it and time to recalibrate your meter.
  • Includes meter, protective sensor cap, sample cup, 4 SR44 button batteries and 1 48 Inch (1.2 meter ) neck strap.
Check Stock

Sper Scientific 860040 Turbidity Meter

  • ✅High Accuracy&One-Button Lock Reading Function - With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response.One-button lock reading function helps lock reading even if the tester is taken out of the sample!.
  • ✅Automatic Calibration - The digital ph meter for water uses a 3-point AUTOMATIC calibration method, calibrating the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18 to ensure the accuracy of your measurements..
  • ✅Automatic Temperature Compensation - No longer need to pay attention to the temperature of testing liquid, Allprettyall ph tester digital can accurately determine the pH value of the sample in the temperature range of 0 °C-60 °C (32 °F-140 °F), so as to solve the inaccurate problem caused by changing the liquid temperature..
  • ✅Wide Application-Allprettyall water quality tester designed in pH and temperature can be measured simultaneously with high precision. Omni-directional measurement of water quality to ensure the health of water quality! The ph meter digital water tester is ideal for drinking water,daily household,hydroponics,sewage, lab teaching and ANY water sample..
Check Stock

HM Digital ORP-STOR ORP Electrode Storage Solution for Use with ORP-200, 60cc Volume

  • Electrode Storage Solution Ph/Orp From Hm Digital Can Be Used With Hm Digital Ph-200 And Orp-200.
  • If You Find That Your Sensor Is Dry Then Refill The Cap With The Op-Stor Storage Solution.
  • The Size Of The Ph/Orp Electrode Storage Solution Is Convenient.
Check Stock

GAOHOU PH0-14 Value Detect Sensor Module + PH Electrode Probe BNC For Arduino

  • Getting the voltage varies on what you’re using. The PH for this sensor is not at 0v for a PH7 it’s around 2.51v from the multi-meter and PH4 at 3.03. If you calculate the step, 2.51-3.03 =-0.52. The difference between ph4.01 and PH7 is 2.99..
  • If you’re using a Particle product like the Photon or Argon, be aware of a bug. It’s a hardware issue with the analog ports fluctuating a ghost voltage. This fluctuation is enough at these low voltages reading to make your ph sway by .7 or more. To fix this, you’ll need to add a 0.1uF cap between the analog port your using and ground..
  • This PH electrode probe must be calibrated with standard buffer solution before each use, and the electrode probe cannot be tested continuously for a long time, which will shorten its life. There are two trimmers on the circuit board. One of them is for offset adjustment (closest to BNC connector) accomplished by removing the Ph probe and shorting the BNC connector with a wire. The other trimmer is an upper limit threshold for the digital output pin..
Check Stock

iPower pH and TDS Meter Combo, 0.05ph High Accuracy Pen Type pH Meter +/- 2% Readout Accuracy 3-in-1 TDS EC Temperature Meter

  • PH220-C Kit to include ATC pH polycarbonate electrode (12 mm diameter) with 39-Inch (1 meter) cable.
  • Large LCD displays pH or mV and Temperature simultaneously.
  • Microprocessor provides for Automatic Buffer recognition.
  • Automatic Temperature Compensation via Pt-100 sensor built into electrode.
Check Stock

Digital pH/TDS Meter with ATC pH Tester, 0.01 Resolution High Accuracy 3 in 1 Pen Type Tester, Water Tester for Water, Wine, Spas and Aquariums

  • ...ll-round measurement of water quality to ensure healthy water quality..
  • 【Automatic Calibration pH Tester】With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. And pH meter uses a 3-point calibration method to calibrate the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18. You can calibrate effortlessly to ensure the accuracy of your measurements..
  • 【High Accuracy Water Tester】High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response. Green Backlit LCD Design guarantees that you can read the measuring results in any condition. One-button lock reading function helps lock reading even if the tds Meter is taken out of the sample!.
  • 【Pocket Size Water pH Tester】 You can use this small Pocket Size but powerful pH meter device to measure your aquarium, pool, pond in a garden, bath tub to test the levels of pH value. The digital ph meter can also be used to measure drinking water, RO System, spa, soap mixtures, food, wine, beer or any other liquids..
Check Stock

Apera Instruments PC910 Benchtop pH/Conductivity Multiparameter Meter Kit with Dual-Channel Simultaneous pH/cond. Measurement

  • An advanced yet intuitive user interface with plain language and graphic screen prompts, supporting English, Spanish, German, and Chinese..
  • Dual-channel simultaneous measurement of pH/mV(ORP) and conductivity/TDS/salinity.
  • 1 to 3 points of automatic calibration with a choice of 5 pH standard buffers and smart self-diagnosis to ensure successful calibrations. Slope is ready to view after calibration..
  • The 201T-F All-in-one PC-body pH/temp. electrode with low-impedance lithium glass membrane ensures quick and stable pH readings..
  • The 2301T-F PVC-body conductivity electrode with platinum black coating ensures high accuracy measurement (1% F. S) in a wide range (0-200 mS/cm).
Check Stock

Digital pH Meter with ATC pH Tester, 3 in 1 pH TDS Temp 0.01 Resolution High Accuracy Pen Type Tester, Water Tester for Water, Wine, Spas and Aquariums

  • ...ture with high precision at the same time. All-round measurement of water quality to ensure healthy water quality..
  • 【Automatic Calibration pH Tester】With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. And pH meter uses a 3-point calibration method to calibrate the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18. You can calibrate effortlessly to ensure the accuracy of your measurements..
  • 【High Accuracy Water Tester】High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response. Green Backlit LCD Design guarantees that you can read the measuring results in any condition. One-button lock reading function helps lock reading even if the pH Meter is taken out of the sample!.
  • 【Automatic Temperature Compensation Digital pH Meter】No longer need to pay attention to the temperature of testing liquid, pH meter can accurately determine the pH value of the sample in the temperature range of 32°F-140°F(0°C-60°C), so as to solve the inaccurate problem caused by changing the liquid temperature..
  • 【Pocket Size Water pH Tester】 You can use this small Pocket Size but powerful pH meter device to measure your aquarium, pool, pond in a garden, bath tub to t....
Check Stock

PH Meter, 3 In 1 Garden Soil Test Kit, TDS PPM Meter, Soil Test Kit for Indoor/Outdoor Plants Plant Soil Moisture Tester Combination For Home, Lab, Garden

  • NOTE: A few drops of water are added to the electrode cap before the product leaves the factory. This is to maintain the sensitivity of the electrode. Therefore, when you use it for the first time, it is normal to find water droplets in the electrode cap.
  • range: -2.00 to 16.00 pH, 32 to 122˚F (0 to 50˚C).
  • Auto. Power-Off: 8 minutes without operation.
  • Easy 1-3 points auto. calibration, recognizes 5 types of solutions (1.68, 4.00, 7.00, 10.01, 12.46).
  • Auto Temp. Compensation (ATC) ensures accuracy in various temperatures (32-122˚F).
  • High quality replaceable glass pH probe, suitable for regular water solutions e.g. pools&spas, hydroponics, environmental monitoring, cooling towers, beverage, etc..
  • Large LCD with 3 backlit colors (indicating different modes), dual display of temp./pH, and reminders of completed calibrations and stable readings.
  • The smiley icon indicates stable readings so you won't have to guess when is the right time to record the measurements.
  • COMPLETE KIT with READY-TO-USE calibration solutions, calibration bottles, storage solutions, AAA batteries, and a lanyard all in a rugged portable case.
Check Stock