Categories

Best Phase Light Mode

Voltage Monitoring Relay Phase Sequence Protection TG30S Phase Sequence Relay 3-Phase Mini for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Voltage Monitoring Relay Protection 3-Phase AC 220-440V Small Size Phase Sequence Protection Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Mini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications

  • Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
  • Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
  • Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
  • Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
  • The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..
Check Stock

Leviton 51110-SRG Residential Surge Protection Panel

  • LEDs show power and surge protection status for each phase.
  • Protection for up to 26,000 amps of surge current per mode.
  • Compatible with Decora Home Control devices.
  • Cost effective surge-protection for commercial/residential environments.
  • Compatible with Decorah Home Control devices.
Check Stock

YWBL-WH Monitoring Relay,JVRD6 Phase Sequence Protection Relay Monitoring Voltage Control Device

  • Function: Three-phase monitoring of phase sequence, phase loss..
  • Application: This monitoring relay is suitable for pumps, fans, blowers, motor elevators, cranes, central air conditioners, etc..
  • Construction and installation: This phase sequence relay uses standard modular construction and rail-mounted mounting..
  • Power supply mode: Powered by the measurement circuit, no additional auxiliary power supply is required..
  • Accessories: With 2 indicators to indicate various working conditions, the two groups usually open/close contacts..
Check Stock

Tebuyus AD8302 Wideband Logarithmic Amplifier Wideband Linear Multiplier Phase Detector Module

  • The AD8302 is a fully integrated system for measuring gain/loss and phase in numerous receive, transmit, and instrumentation applications. It requires few external components and a single supply of 2.7 V–5.5 V..
  • The ac-coupled input signals can range from –60 dBm to 0 dBm in a 50 ohm system, from low frequencies up to 2.7 GHz. Both subsystems have an output bandwidth of 30 MHz, which may optionally be reduced by the addition of external filter capacitors..
  • The AD8302 can be used in controller mode to force the gain and phase of a signal chain toward predetermined setpoints..
  • The AD8302 includes a phase detector of the multiplier type, but with precise phase balance driven by the fully limited signals appearing at the outputs of the two logarithmic amplifiers..
Check Stock

AMPINVT 6000W Peak 18000W Pure Sine Wave Power Inverter Charger DC 24V to 120V/240V AC Output RV Converter with Battery AC Charger LCD Display,Low Frequency Solar Inverter

  • 120/240 VAC Split Phase,continuous 6000 watt low frequency inverter 110V/220Vac Split Phase, Peak 18000 watt.
  • Adjustable charge current off-0%-100%, Five Stage Smart Charger, 60A Max battery AC charger max For lifep04，Sealed Gel AGM Flooded Lithium, Sealed,....
  • UPS AC output Switch Inverter load Rate 5-10msec transfer time,common household appliances will not power and restart.Remote panel available.
  • Working Mode(optional): 1.AC Input Priority.
  • charging current and charging voltage can be adjusted.
  • customizable voltage for low voltage protection and voltage for low voltage recovery..
Check Stock

AMPINVT 6000W Peak 18000W Pure Sine Wave Power Inverter Charger DC 24V to 120V/240V AC Output Converter Off Grid Low Frequency Solar Inverter for Sealed Gel AGM Flooded Lithium Battery

  • 1. 120/240 VAC Split Phase,continuous 6000 watt low frequency inverter 110V/220Vac Split Phase, Peak 18000 watt.
  • 2. This Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch. High transfer efficiency is above 90%, , complete isolate surge interference of input & output's voltage and current, Impact resistance, super load capacity, built-in AVR stabilizer, continuous stable pure sine wave output..
  • 3. Battery typesetting choose : SLA ,AGM , GEL , Li-ion battery & Customize. Support lifep04，Sealed Gel AGM Flooded Lithium, Sealed, Gel, and Flooded Batteries...
  • 4. Adjustable Charging Current: The max charge current can be adjusted from 0%-100%, 100% is max charge current 35A. Setting the value to 0% will turn off the charging function..
  • 5. Five working mode : AC priority mode , Battery priority mode , Generator mode , ECO mode , Unattended mode. When AC input is present, the battery will be charged first, and the inverter will transfer the input AC to power the load. When you choose battery priority, the inverter will invert from battery dc to ac output . Battery priority mode & Unattended mode have Low volt restore setting and Low volt protect setting..
  • 6. Protections: Battery low voltage alarm / Battery high ....
Check Stock

LM YN AD8302 Wideband Logarithmic Amplifier Wideband Linear Multiplier Phase Detector Module Low Frequency to 2.7G for OPA695

  • The AD8302 is a fully integrated system for measuring gain/loss and phase in numerous receive, transmit, and instrumentation applications. It requires few external components and a single supply of 2.7 V–5.5 V. The ac-coupled input signals can range from –60 dBm to 0 dBm in a 50 ohm system, from low frequencies up to 2.7 GHz. Both subsystems have an output bandwidth of 30 MHz, which may optionally be reduced by the addition of external filter capacitors. 003cbr003e.
  • The AD8302 can be used in controller mode to force the gain and phase of a signal chain toward predetermined setpoints.003cbr003e.
  • The AD8302 includes a phase detector of the multiplier type, but with precise phase balance driven by the fully limited signals appearing at the outputs of the two logarithmic amplifiers. Thus, the phase accuracy measurement is independent of signal level over a wide range. The signal inputs are single-ended, allowing them to be matched and connected directly to a directional coupler. Their input impedance is nominally 3 kΩ at low frequencies. 003cbr003e.
  • The phase and gain output voltages are simultaneously available at loadable ground referenced outputs over the standard output range of 0 V to 1.8 V. The output drivers can source or sink up to 8 mA. A load....
Check Stock

Phase Sequence Meter, 20 Hz ~ 400 Hz Compact Handheld Three Phase Sequence Rotation Meter, No Battery Needed, for General Measuring Tool

  • Wide range of uses: 100% brand new high quality digital phase indicator. An indicator with two functions to check the phase sequence and indicate whether the phase is disconnected..
  • Easy to use: This indicator can check three-phase AC voltage from 200V to 480V, with excellent performance. The LED light can show whether the phase is disconnected and supports buzzer indication..
  • Easy to carry: small size, light weight, convenient to carry, simple operation, safe and reliable to use. Small and light, with a bag for you to take with you..
  • High-quality materials: Made of high-quality plastic, it has excellent insulation, heat resistance, and is not easily damaged by collision. High-quality products provide you with a high-quality guarantee..
  • Professional manufacturing: factory unified standards, excellent, professional manufacturing, CNC edge processing and cutting, long service life, all components meet strict production requirements. You can add it to the shopping cart immediately and enjoy this home digital display test pen quickly..
Check Stock

MYSWEETY TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Hybrid Stepper Motor for CNC

  • 9V-42V DC power supply, H bridge bipolar constant phase flow drive.
  • The maximum 4.0A of the eight kinds of output current.
  • The largest 32 subdivision of the 6 models are optional.
  • Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection..
  • Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode..
Check Stock

Leviton R15-Tbl03-10e 120v Black Universal Led, Cfl, Incandescent Tabletop Dimmer

  • 120/240 Volt Panel Protector 4 Mode Protection.
  • Real time diagnostic visual indicator shows power and suppression status for each protected phase.
Check Stock