Cool Blocks Bandsaw Blade Guide Block Size 3/8" x 3/8"
- Made from a specially formulated graphite impregnated phenolic laminate.
- Cool Blocks are self-lubricating, enabling them to withstand the heat.
- Eliminate blade damage that occurs when teeth contact the metal blocks.
- 4 blocks per pack to fit upper and lower guides.
Check StockCool Blocks Bandsaw Blade Guide Block Size 1/2" x 1/2"
- Made from a specially formulated graphite impregnated phenolic laminate.
- Cool Blocks are self-lubricating, enabling them to withstand the heat.
- Eliminate blade damage that occurs when teeth contact the metal blocks.
- 4 blocks per pack to fit upper and lower guides.
Check StockLeecraft RG-2 Zero Clearance Insert for RIDGID TS2400-1 2400LS and 2410LS Colors May Vary
- Table saw insert for Ridgid jobsite saws models TS2400-1, TS2400LS, and TS2410LS..
Check StockOlson Saw CB50010BL 12-Inch Sears TTB Band Saw Accessory Cool Blocks
- For Sears 12″ Tilting Table Band Saws, Skill 10″ HD3640 and Dermal 10″ 1120.
- Contains: 4 guide blocks 3/8″ x 3/8″ x 3/4″.
- Cool Blocks blade guides are made from a high tech, non-metallic composite material, “Graphite Impregnated Phenolic Laminate”.
Check StockLeecraft RG-4 Table Saw Zero-Clearance Dado Insert for RIDGID R4510 Colors May Vary
- Fits Ridgid R4510 jobsite saw for use with dado sets.
- 14" x 3-3/4" x 3/8" thick without riving knife slot.
- Precision machined from melamine faced high density phenolic laminate.
Check StockLeecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746
- Table saw insert for eWalt DW744 and DW746.
- Significantly reduces saw noise, dust, chip-out, and splintering.
- Constructed of high-density phenolic laminate with a bonded-melamine surface.
- User-friendly with leveling and lateral adjustment screws, rear anti-life pin, and precut blade bottom pocket.
Check StockLeecraft RG-1 Zero Clearance Table Saw Insert for Ridgid TS3650 Table Saw
- Table saw insert supports work right up to the blade for smooth, more precise cuts.
- Offers superior rigidity, flatness, durability, and low friction.
- Made from high-density phenolic laminate with a bonded-melamine surface.
- Includes leveling screws, side and end adjustment screws.
- precut blade bottom pocket for fully retracted blades and bevel cuts.
- designed for Rigid table saw with carbide-tipped blades only.
Check StockCMT 222.080.10 Industrial Plexiglass and Plastic Saw Blade, 10-Inch x 80 Teeth MATB Grind with 5/8-Inch Bore
- Heavy-duty cutting, smooth finish with no melting. For radial arm saws, miter/table, special saws..
- Cut thin plastic, phenolic, plexiglass, vinyl, laminate flooring and plywood..
- 0.110 kerf thickness, 0.087 plate thickness, -3° hook angle, Alternate top bevel with chamfer grind..
- Chrome carbide cutting edges guarantee long cutting performance..
- Anti-vibration design, expansion slots to reduce noise, tight tolerance, longer lifetime..
Check StockBosch PR004 Offset Base With Roller Guide for the Bosch Colt PR20EVSK & PR20EVSNK Palm Routers
- Offset base designed to work with Bosch palm routers PR20EVSK and PR20EVSNK.
- Permits routing of near-vertical surfaces such as laminate applied to the top of a countertop backsplash.
- Quick-Clamp System allows motor to be easily moved from base to base.
- Includes base, base cover, phenolic sub-base, 1/4-inch self-releasing collet, drive gear, roller guide for PR004, wrench..
Check StockLeecraft DW-4 Zero-Clearance Insert for Dewalt Sliding Compound Miter Saws DHS780 DHS790 DWS779 DWS780 and DWS782 Colors may vary
- Leecraft model DW-4 fits DeWalt sliding miter saws: DHS790, DWS779, DWS780 and DWS782.
- Miter saw insert supports work right up to the blade for smooth, more precise cuts.
- Offers superior rigidity, flatness, durability, and low friction.
- Made from high-density phenolic laminate with a bonded-melamine surface.
Check StockBosch Model 4000 & 4100 Series Table Saw Zero-Clearance Blade Insert 4130 Approx Dims 13-5/8 in x 3-3/4 in x 3/8 in
- Insert Dimensions: Fits 4100/4000 series jobsite table saws 13-9/16" x 3-3/4" x 7/16".
- Made from high-density phenolic laminate with a bonded-melamine surface.
- Bosch insert insert fits various Bosch models of table saws..
- Includes leveling screws, side and end adjustment screws.
- Please check your Length x Width x Thickness of your current insert before ordering to ensure that you get the correct insert..
Check StockWoodline 8PC Cool Blocks Bandsaw Blade Guide Block Size 1/2" x 1/2" 1" fits 14" JET, Grizzly, General, Reliant Craftsman, Rigid and most imports
- 14″ JET, Grizzly, General, Reliant, Craftsman, Rigid and most imports..
- Specially formulated impregnated phenolic laminate..
- Cool Blocks are self-lubricating enabling them to withstand the heat..
- Eliminate blade damage that occurs when teeth contact the metal blocks/bearings.
- 8 blocks per pack. Only need 4 to fit upper and lower guides at a time..
Check Stock
Pneumatic Adjustable Height Laptop Desk, Sit and Stand Mobile, Ergonomic Design, Excellent Computer Workstation for Classrooms, Offices, and Home! 25.5''x18'' CARTMAY(White)
- Adjustable Desk: Raise and lower the desk from 27.9" to 45.3" inches with the lever-operated air-powered cylinder. Easy and fast adjustable height desk..
- Strudy & Professional Design: Made of Phenolic Compact Laminate (HPL). High quality materials ensure that this mobile laptop desk can back up your arms strongly..
- Ergonomic Design: This adjustable standing desk provides ergonomic work space for you. Choose comfortable height, no pain..
- Multifunctional Podium: Stand up or sit down, different heights for different needs. This mobile desk is ideal for the office, school, classroom, conference room, training, tradeshow, or home..
- Ultra-stable and portable: The four-legged design gives the table sufficient stability. You don't have to worry about slipping or unevenness at all. This mobile computer desk has 4 wheels so it's portable mobile ability allows you to use it in many different places..
Check Stock
