Categories

Best Phoenix Contact Ferrule Crimper

Ferrule Crimping Tool VLIKE Wire Crimper Pliers with 1200 Terminal Ferrules Connector Sleeves for Stripper Wiring Projects

  • Complete Crimp Tool Kit – Every order comes with a crimping tool and 1200 insulated wiring terminals to support small DIY projects and large....
  • Ergonomic Handle Design – The handle with nylon material, non-slip, and using the leverage theorem, the operation more effort..
  • Square Crimping Pliers – For insulated and uninsulated sleeve terminals, wire ferrule & end sleeves 0.25-10mm², ferrule crimper AWG23-7 HSC8 6-4..
  • Professional Craftmanship – This crimping tool makes short work of terminals and connectors for electricians, contractors and builders..
  • Self adjustable Crimper Plier Tool – According to the requirements of the terminal, it automatically adjusts itself to the appropriate diameter for....
Check Stock

Wire Terminals Crimping Tool Kit Self-Adjusting Automatic Ratcheting Wire Terminals Crimper Tool AWG22-16 0.5-1.5mm² with 300PCS Male and 300PCS Female Spade Connectors

  • High Quality: The crimping tool is constructed by Alloy Steel with black oxidation treatment on the surface form a dense layer of oxide film which is....
  • Ratcheting Mechanism: This crimper is with adjustable Crimping Force, Adjusts crimping height to ensure the right amount of crimping force depending....
  • Dies Changeable: The crimping end is removable, and there are two screws on it, you can take a replacement of the dies for different types of crimp on....
  • Wire Crimper Size: Crimping range is AWG22-16, 0.5-1.5mm², suitable for TAB 2.8mm, 4.8mm, 6.3mm spade connectors. This ferrule wire crimper kit comes....
  • 100% satisfaction guarantee: If you have any issues with the Terminals Crimping Tool Kit, simply contact customer service for troubleshooting help,....
Check Stock

Ferrule Crimping Tool Kit, LUNEY Wire Ferrule Kit with 1250PCS Wire End Ferrules & Crimper Plier, Self-adjustable Ratchet Tool Set for AWG 23-7 Electrical Wire Connectors, 0.25-10mm²

  • ...ower supply, car audio, lamp, speaker wiring project, and so on..
  • 【Important】Before you start installing ferrules, make sure the wire is not live. You should never install ferrules on live wires! If you are not satisfied with our products or have any questions, you can contact us and we will reply you within 24 hours..
Check Stock

Mayntop Women Coat Jacket Hooded Striped Color Block Flannel Fleece Lined Faux Fur Pocket Loose Oversized Zipper Plush Warm Outerwear A Brown,5XL

  • [PROFESSIONAL CRIMPING TOOL] The ferrule wire crimping tool has efficient ratcheting mechanism, professional grade crimping die and ergonomic....
  • [EVERYTHING IN ONE KIT] The electrical tool kit also comes with a 1200pcs wire terminal kit and a storage bag. The ferrule connectors are made with....
  • [ADJUSTABLE CRIMPING FORCE] The crimper tool has a star wheel that allows to adjust crimping height to ensure the right amount of crimping force....
  • [PRECISE RATCHETING MECHANISM] Wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases....
  • [QUALITY COMMITMENT] We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We....
Check Stock

Wire Rope Crimping Tool Kit with 1/16-304 Stainless Steel Cable 165 ft 7x7 Strand Core 100 Cable Ferrule Aluminum Loop Sleeve Stops

  • ♛ What You Get - In this crimping tool set, it include a heavy duty crimping pliers, 1/16 stainless steel wire rope 165 foot length (7x7 strand core cable, 380 Lbs breaking strength) and 100pcs double barrel ferrule crimp sleeve set (1.5mm).
  • ♛ Crimping and Cuttin - 4 Crimping Positions: 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm. It can easily crimp copper / aluminum sleeve and more from 50-450 lb test line. The Crimper is Made of heavy duty stainless steel for maximum corrosion resistance to be preserved by sea water corrosion or occasional inappropriate and rust..
  • ♛ Comfortable - Cushioned non-slip grips and Feature a Safety lock. Crimping tool with self locking mechanism design makes it more relax to provide optimum pressure, and the safety lock is easy way to keep you crimper close..
  • ♛ Wide Applications - Crimping tool coordinate with barrel ferrule can be widely used for wire rope, cable line dog leashes and etc. It can also work well in hanging string lights, clothes, photos, or decorations in your bedrooms, patios, gardens, pergolas, etc. Suitable for DIY designs, commercial activities, wedding celebrations, and festival occasions.
  • ♛ 100% SATISFACTION GUARANTEE - We’re so confident that our products will meet or exceed your expectations, s....
Check Stock

Solsop Ferrule Crimping Tool Kit + Automatic Wire Stripper AWG23-7 Self-adjustable Ratchet Wire Crimping Tool Kit Wire Ferrule Kit with 1250PCS Wire Terminals

  • Wire Ferrule Kit - Comes with a ferrule crimping tool, Self Adjusting Wire Strippers 8-inch and 1250 insulated wiring terminals to support small DIY....
  • Ferrule Crimper & Wire Stripping Tool - For insulated and uninsulated sleeve terminals & connectors, the crimping area is 0.08-10mm² (AWG 28-7).
  • Self-Adjustable Feature - Automatically adjusts itself to the appropriate diameter for crimping, easy to operate.
  • Ergonomic Handle Design - Labor-saving ratchet mechanism. The non-slip nylon handle is well designed for providing you with easy operation and sturdy....
  • Our Worry-Free 18-Month Warranty and Toll-Free Tech Support, and friendly customer service. If you are not satisfied with your purchase within....
Check Stock

Crimping Tool, Wire Rope Crimping Tool, Up To 2.2mm Swager Crimper Fishing Wire Crimping Tool with 100 PCS Aluminum Double Barrel Ferrule Crimping Loop Sleeves Kit with Cutting Function for Cable

  • 【Premium Quality】- The wire crimping tool was made of heavy-duty stainless steel, which is corrosion and rust resistance. 4 positions: 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm, It can easily crimp copper/aluminum sleeve and more from 50-450 lb test line..
  • 【Special-Purpose】- Cable crimper tool With non-slip grips and self-locking. The safety lock is an easy way to keep your crimper closed when you don't use it. And the mechanism design makes it more relaxing to provide optimum pressure..
  • 【Wide Application】- Crimping tool kit comes with 2 hardened steel side cutters, which can help you cut the wire without frays and the strong spring opens the cutters instead by your hands. Coordinate with aluminum double-barrel ferrule crimping loop sleeve can be widely used for wire rope..
  • 【Package Included】- High precision wire rope crimping tool with a 100Pcs Aluminum double-barrel ferrule crimping loop sleeve kit..
  • 【Pay Attention to】- ❶ The crimping tool can only be crimped to aluminum sleeves of 3/32" and below. ❷ The cutting section can only cut wire ropes 1/16" and below..
Check Stock

Victor 0384-2101 Journeyman Edge 2.0 540/510, 90° Plus Outfit

  • Includes 2 barbed hose splicers and 4 hose ferrules.
  • Common USA torch inlet and regulator outlet connections.
  • Low pressure, less than 200 psig gas service.
  • Repair your 1/4-Inch hose in the field, (ferrule crimper not included).
Check Stock

HKS Ferrule Crimping Tool Square Crimper for AWG 30-5 0.08-16mm² End-Sleeves Ferrules Wire Ends Terimnals Self-Adjusting Piler Ratchet Wire Crimping Tool Crimper 16-4H

  • CRIMP RANGE: 30-5AWG (0.08mm²-16mm²) With a three-stage adjustable knob function, so you do not have to buy extra ferrule crimper to cope with the....
  • MORE ACCURACY - Due to the special design of the crimping jaw, the crimping force is more uniform. This feature is particularly important in the....
  • EXCELLENT INDUSTRIAL DESIGN makes the product more durable! This crimper design solution allows the spring to have a shorter stroke, while the....
  • LIGHTER WEIGHT ! Only 1.12 lbs (0.51 kg)! The ergonomic anti-skid handle makes it easier for you to use this tool..
  • FULL RATCHET CRIMP ensuring fully crimped terminals, crimped insulated and non-insulated end sleeves and ferrules!.
Check Stock

Crimping Tool Set Qibaok Ratcheting Wire Crimper Tool with 4 PCS Interchangeable Dies for Heat Shrink Connectors Non-Insulated Ferrule Terminals and Insulated Connectors

  • PACKAGE CONTENTS- This crimping tool kit includes a wire crimper, 4 interchangeable jaws with different crimping ranges and a a storage case..
  • WIDE CRIMPING RANGE- 4 interchangeable dies works with heat shrink connectors(crimping range:0.5-6.0mm²/20-10AWG), insulated nylon connectors(0.5-6.0mm²/20-10AWG), non-insulated terminals(1.5-10mm²/16-8AWG), ferrule terminals(0.5-6.0mm²/20-10AWG). Fits for various projects. Please use a Screw Driver to change to another die set..
  • ADJUSTABLE CRIMPING FORCE- The tool has a star wheel that allows to adjust crimping height to ensure the right amount of crimping force depending on your crimping project. A designated quick release lever allows to open the crimper jaws in any position..
  • PRECISE RATCHETING MECHANISM- Wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically..
  • ERGONOMIC COMFORTABLE HANDLES- The ergonomic, cushioned, non-slippery handles were designed to ensure strong grips in any condition..
Check Stock

Wirefy Crimping Tool Set 8 PCS - Ratcheting Wire Crimper - Heat Shrink Non-Insulated Open Barrel Flag Ferrule Connectors

  • VERSATILE WIRE CRIMPER TOOL SET - Works with heat shrink, insulated nylon, non-insulated, open barrel, ferrule, and flag terminals.
  • PERFECT CRIMP EVERY TIME – Precise ratcheting mechanism makes proper uniform crimps every time.
  • EFFORTLESS CRIMPING - Professional grade crimping mechanism for all day crimping without hand fatigue.
  • INCLUDES PRECISION WIRE STRIPPER – Effortlessly cut and strip your wires with a professional wire stripping tool.
  • LIFETIME WARRANTY - All Wirefy tools are backed by our best-in-class lifetime warranty.
Check Stock

KOTTO Ferrule Wire Terminal Block Crimping Tool Plier Tool Kit Set with 860 Ferrules, Wire cutter, Storage Bag, UL Color AWG Guidelines, Industry Standard Coded Ferrules

  • Complete Crimp Tool Kit – Each set comes with a crimping tool, Wire Cutter, and 860 pieces insulated wiring terminals to support small DIY projects and large electrical repairs..
  • The ferrule crimping tool range is 0.25-10mm²/ 26 - 8 AWG, suitable for most typed insulated, non-insulated sleeve terminals and connectors. While our wire cutter and stripper is compatible with 10-22 AWG solid core and stranded wires..
  • Our ferrules are compliant with the industry-standard guide for color coding and wire AWG size. Many products assign random colors, but we follow the UL industry-standard color coding and AWG guide for compliance. We do the research of each of our tool packs to follow the industry set guidelines..
  • Ferrule sleeves are made of high-temperature polypropylene, and the tube is made of corrosion-resistant tin-plated copper..
  • Our steel crimper features non-slip, ergonomic handle design labor-saving ratchet device provides improved gripping power. Ratchet type linkage mechanism allows for automatic and precise crimping as well as one-handed operation. Making the operation easier, faster, and more reliable..
Check Stock

Ceramic Hair Crimper Iron,Hair Crimping Iron,Hair Waver for Beach Waves,Deep Barrel Curling Iron,3 Barrel Curling Iron 0.59 inch / 15mm Instant Curls Valentines Day Gifts for Women

  • ✿FULLY ADJUSTABLE TEMPERATURE: Seamlessly adjust the temperature from 100℃(212℉) up to 230℃(446℉) to suit fine, normal, and even thick hair. Kindly note that this crimper iron is Celsius ONLY..
  • ✿EASY TO USE & CURL: 360° rotatable power cord stretches up to 6.56ft/2.0 m - 40% longer than similar hair crimper iron.
  • Built-in stainless steel support lets you easily lay the 3 barrel crimper iron to cool down.
  • ✿SAFE BUILD & OPERATION: Avoid scalding with the thermally insulated wand tip and safety lock.
  • This crimper iron will turn automatically off after 60 minutes for extra peace of mind.
  • ✿FAST HEATING PTC & CERAMIC COATING: Heats up to 230℃(446℉) in only 60 seconds for fast curling.
  • Ceramic construction allows for a smooth operation without pulling the hair.
  • ✿FOR ALL HAIR TYPES & FAST CUSTOMER SUPPORT: Benefit from a finely-proportionate build that measures 12 inch/31cm in length and 1.9 inch/4.9cm in width to suit both long and short hair.
  • MANNICE CUSTOMER SUPPORT-If you are not satisfied with this hair crimper iron ,within 12 months, for any issue or concerns, you can contact us directly and ask refund or replacement.You can contact us and we will reply within 24 hours..
Check Stock