Categories

Best Photocell Controller

Titan Controls Atlas 3 Day/Night Carbon Dioxide CO2 Monitor & Controller with Photocell 120V - ETL Listed

  • Atlas 1 Co2 monitor/controller comes with a 25 foot remote sensor.
  • It features adjustable set point and elevation levels, a built in 'self calibration' function and an integrated photocell that enables operation in....
  • Simple to use and easy to operate 12 amps/115 volt/60 hz.
  • The sensor comes factory calibrated for precise Co2 readings and utilizes low voltage technology to avoid radio frequency interference (rfi) from....
Check Stock

Lee Electric 209DN 600-Watt Door Light Switch,White

  • 【DUSK TO DAWN PHOTOCELL SENSOR SWITCH】 - ADUB photocell sensor switch features auto on/off function to your light fixtures, no need for manual operation. Anti-interference delay feature of this dusk to dawn sensor prevents interference from passing cars or lightning. Save your time and bills!.
  • 【MULTI VOLTAGE PHOTOCELL SENSOR】 - Applicable Voltage: 120-277VAC, 50/60Hz. Rated Loading: 500W TUNGSTEN. Threaded Diameter 0.78 inch, 10~20Lx on and 30~60Lx off operate level. Great for controlling outdoor lights such as post-street lights, parking lot lights, yard lights, barn lights, floodlights, entry lights, driveway, walkway lighting, and other outside security lights..
  • 【EASY TO INSTALL & USE】 - Before installation of the photocell sensor, please disconnect the power, then place the screw thread of the photocell sensor switch in the knockout hole and fasten it with a rubber gasket and zinc alloy lock-nut. Adjust the swivel base and point the outdoor photo cell sensor at the precise spot where you need it..
  • 【ADJUSTABLE DESIGN & WATERPROOF】 - The photoelectric tube can be rotated 180° to achieve a beautiful light direction, and focused on the position you need. Heavy-duty body and IP65 Water-resistant protects the photocell sensor against....
Check Stock

2 Pack Outdoor Photoelectric Sensor,120V AC Photocell Light Sensor Switch,Dusk to Dawn Swivel Mount Conduit Lighting Control,IP65 Waterproof Photocell for LED Post Light,Wall Pack,Porch Lights

  • 【Outdoor Lighting Controller】This outdoor light controller automates lights, lamp posts or lanterns in the driveway and entryway so that your....
  • 【Automatic Outdoor Light Remote Control】With the photocell light sensor, the outdoor lighting remote control can sense the amount of sunlight and....
  • 【Energy Saving & Hassle-Free】Conserve energy as switch comes with a light control sensor that will automatically turn your lights on at dusk and....
  • 【Weather-Proof Remote Control For Outdoor Lights】This remote control for outdoor lights has a RAIN TIGHT case to protect it from the elements,....
  • 【Very Broad Application Scenarios】Perfect for wiring into a lamp or lighting system requiring photoelectric automation. Can work with most types....
Check Stock

2 Pack Photocell Sensor Switch, UL Listed Outdoor Conduit Lighting Control with Swivel Mount, IP65 Dusk to Dawn Hardwired Photoelectric Switch for LED Post Light, Wall Pack, Shoebox, Porch Lights

  • 【Convert Fixtures to Auto On/Off 】- The photocell in the outdoor lighting control senses sunlight and auto turns on at dusk/off at dawn. No need for manual operation anymore and saving your energy and money..
  • 【UL Listed Outdoor Light Controller】- Our 120-277V photoelectric switch sensor is UL listed to ensure quality and your safety. Heavy-duty body and IP65 waterproof protects the sensor against weather elements such as rain and dust. 3 Years Warranty, any problem, just feel free to let us know at your convenience..
  • 【Intellegent Photocell Sensor Switch】- 30~120s time delay feature in the outdoor motion sensor light control prevents the accidental triggering off the light due to a stray animal, the headlights of a passing car or lightning..
  • 【Simple Installation & Easy to Use】- Place screw thread of the switch in the knockout hole and fasten with rubber gasket and zinc alloy lock-nut. The swivel base can be positioned at the precise spot, focusing light on where you need it to be is effortless..
  • 【Specifications & Wide Applications】- AC 120-277 input voltage, 50/60Hz, threaded diameter 1.06 inch, 10~20Lx on and 30~60Lx off operate level. Great for controlling outdoor area lights, post light, porch lights, yard lights, floodlights, ....
Check Stock

MULANDI Pathway Lights Outdoor, 45LM LED Low Voltage Landscape Lighting Garden Warm White Light, Stake Plastic Waterproof Auto On/Off Landscape Lighting for Driveway Yard Lawn Pathway Garden(4 Pack)

  • ... are perfect for lining your home's walkways, pathways, garden, deck, patio and more!.
  • LONGER LASTING - Included in the package are 4PCS low voltage 1.2W lights with ground plug, 1PC photocell, 1PC 6W transformer, and a 9.15m 18AWGSPT-2W cable. Chinese cap design, effectively protect the light source..
  • PHOTOSENSITIVE CONTROLLER - after the installation of photosensitive, it will automatically close or open the light source according to the light, without manual switch, it will be off in the daytime, it will be open in the dark..
  • EASY INSTALLATION - Just fix the wiring head of each lamp on the main line and keep the voltage in use at low voltage, turn on the switch, install the pole and stake, then insert the light into the soft ground. Connect to the power and you'll get a shiny pathway light..
Check Stock

Honeywell Home RPLS740B ECONOswitch 7-Day Solar Programmable Switch, Lights and Motors, Indoor and Outdoor, Energy Saving

  • 【2 Pack Outdoor Lighting Controller】This outdoor light controller automates lights, lamp posts or lanterns in the driveway and entryway so that your house will be well-lit and will less likely attract burglars..
  • 【Automatic Outdoor Light Remote Control】With the photocell light sensor, the outdoor lighting remote control can sense the amount of sunlight and automatically switches on at dusk and off at dawn.
  • this saves you the trouble of having to remember to switch it off at certain times..
  • 【Energy Saving & Hassle-Free】Conserve energy as switch comes with a light control sensor that will automatically turn your lights on at dusk and offs at dawn. No more worries..
  • 【Weather-Proof Remote Control For Outdoor Lights】This remote control for outdoor lights has a RAIN TIGHT case to protect it from the elements, dirt and dust - other brands are not rain tight..
  • 【Very Broad Application Scenarios】Perfect for wiring into a lamp or lighting system requiring photoelectric automation. Can work with most types of light lamps, such as LED, incandescent, halogen and fluorescent bulb, etc.Suitable for installing places where needs lighting at night or low light environments. Can be used with garden light, yard light, entry lights, walkway light....
Check Stock

KOOBOOK 2Pcs AC 120-277V Photoelectric Switch Dusk to Dawn Button Flush Mount Photo Control Eye Switch Light Photocell Sensor

  • This photocell sensor is perfect for street lights, wall packs, barn lights and any other outdoor fixture that you need to have a dusk to dawn feature..
  • The internal environment has an illumination, and the circuit is automatically detected. When the environmental susceptibility changes to a value, it is automatically turned off during the day and automatically turned on at night..
  • Internal IC import components, program control circuit anti-interference design, outdoor same light perception conditions, multiple sensors synchronous opening, induction precision, high sensitivity..
  • Small volume light controller is easy to install..
  • Save energy, safe and reliable, long service life..
Check Stock

Space Heater Photocell PP236 M16656-24 for Reddy Remington Master Knipco Heaters Parts Replacement

  • PP236 M16656-24 Photocell for Reddy Remington Master Knipco Heaters Parts.
  • for DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, TSC: (PP236, M16656-23, M1665623, M16656-24, M1665624).
  • PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-016-1010, 710161010).
  • This photocell is used with heaters that have the hot surface ignitor (glow plug). UNLESS you have the DESA upper tier heaters that have the plastic handle and shroud that covers the fuel tank. That photocell is part M16656-21.
Check Stock

ZFLXH Space Heater Replacement Parts PP236 Photocell For Reddy Remington Master Knipco Heaters M16656-24

  • ⭐PP236: Photocell Assembly should be used with 104068-02 ignition control boards on oil fired heaters..
  • ⭐This photocell is used with heaters that have the hot surface ignitor (glow plug). UNLESS you have the DESA upper tier heaters that have the plastic handle and shroud that covers the fuel tank. That photocell is part# M16656-21.
  • ⭐PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-016-1010, 710161010).
  • ⭐DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, and TSC: (PP236, M16656-23, M1665623, M16656-24, M1665624).
Check Stock

120v Ac Dusk to Dawn Sensor for Outdoor Lighting Photoelectric Switch Photocell Light Sensor Hardwired Post Eye Light Control Most Outdoor Lamp Fixtures Bulbs, 3 Pieces

  • UL Listed: Our photocell sensor is UL listed to ensure quality and your safety, for a wide range of residential and commercial applications..
  • Function: The photocell sensor inside senses sunlight and automatically turns lights on at dusk and off at dawn.Time delay function inside the sensor eliminates the load temporarily switching off due to car headlights, lightening or another temporary light source..
  • Specifications: The rated voltage of photocell light sensor is 120Vac, 50/60Hz, 1.2W max power consumption, 96%RH related humidity, -40℃~70℃ ambient temperature, 10~20Lx on and 30~60Lx off operate level..
  • Occasion: The photoelectric switch is applicable to control the street lighting, passage lighting and doorway lighting automatically in accordance with the ambient lighting level..
  • Easy Installation: Disconnect power, remove junction box cover, place the switch in knockout hole and fasten with locknut.Remember that don't install the switch with the Photocell facing artificial or reflected light,this will cause the unit to cycle on and off at night..
Check Stock

Pro-Parts New Replacement PP236 Photocell Heaters for Reddy Remington Master Knipco DESA M16656-24

  • PP236: Photocell Assembly should be used with 104068-02 ignition control boards on oil fired heaters..
  • Apply to DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, and TSC: (PP236, M16656-23, M1665623, M16656-24, M1665624) PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat.
  • This photocell is used with heaters that have the hot surface ignitor (glow plug). UNLESS you have the DESA upper tier heaters that have the plastic handle and shroud that covers the fuel tank. That photocell is part# M16656-21.
  • A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable)..
Check Stock

J.LUMI YCA1030 Outdoor Hard-Wired Post Eye Light Control with Photocell Light Sensor, Photocell Sensor, Dusk to Dawn Light Sensor, Photocell for Outdoor Light, UL Listed

  • | UL LISTED | Our photocell sensor is UL listed to ensure quality and your safety, for a wide range of residential and commercial applications..
  • | AUTOMATIC ON/OFF | The photocell senses sunlight and automatically turns lights on at dusk and off at dawn. Ideal for outdoor lamp post lighting, wall packs or wall scones..
  • | FLUSH MOUNT PHOTOCELL BUTTON | Standard size for use residential outlet box, post lamp poles or wall pack fixtures. Time delay function inside the sensor eliminates the load temporarily switching off due to car headlights, lightening or another temporary light source..
  • | FOR OUTDOOR USE | This photocell control has IP65 protection rating for outdoor use. The heavy duty body – without the frosty cover - protects the sensor against weather elements such as rain and dust. Frosty cover is optional and will not increase protection rating of this sensor..
  • | ELECTRICAL SPECIFICATIONS | 120V 60Hz, 600W Tungsten.
  • incandescent, fluorescent, LED, halogen, mercury vapor, high pressure sodium, and CFL compatible. For user manual, please scroll down to the Technical Specification section in the lower right of this page..
Check Stock

ALEKO GGARM450/900 Actuator for Swing Gates Opener

  • RUST RESISTANT ALUMINUM - ALEKO Electric Gate Opener is rust resistant with aluminum frame, light and easy to install. Automatic gate opener for 45 ft gates, system remote controlled and 2 remotes included..
  • DIY INSTALLATION - All materials included: (1) AC120 V motor, (2) wireless remote controller (1) 20 ft chain (1) metal base + cover (1) accessories set, nuts and bolts, Photocell, Wireless Keypad, Wall Push Button, Wall Mount Box (1) user manual - video guides, tech support, customer service and online instructions available..
  • SMART SAFETY SENSOR - Upgrade to luxury ALEKO Sliding Gate Kit for 1500lb gates. Features soft start and soft stop performance for long lasting motor. Electric system stops for safety and reverses if sensor detects obstruction. Wireless operator clicker used to control ALEKO gate hinges..
  • ELEGANCE AND QUALITY - ALEKO Automatic Sliding Gate Opener provides long lasting service for your home. We are proud to offer Amazon 30-day money-back guarantee. Customer service is available M-F to assist with shipment, delivery, measurement, install, and tech support needs..
Check Stock