Categories

Best Photoelectric Switches

3pcs DEVMO 3D Printer Limit Switch Mechanical Switch Module Endstops Switch with 39.4 inch Cable Compatible with Ramps RepRap Tevo Tornado

  • Compatible with Ramps Tevo 3D Printer Parts, Optical Endstop switch with 1M Photoelectric Light Control.
  • Endstops for 3D Printer: usedd for Tevo, if you want to in all creality 3D Printer, CR -10 CR 10S S4 ,S5.
  • Must 3D Printer Limits: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch.
  • Warm Tips: Generally, the printer DIY system need at least three optical switches.
  • Under normal circumstances, the system must be configured to at least three mechanical switches.
Check Stock

AC 120V Dusk to Dawn Sensor Photoelectric Switch Light Photocell Sensor Lighting Switch

  • water pitcher.Brand new photoelectric switch with automatic illumination detection circuit, and it will shut down during the day and open during the night automatically.120v photoelectric switch.
  • pitcher with lid.Dusk to Dawn Sensor Photoelectric Switch is perfect for wiring into a lamp or lighting system requiring photoelectric automation.dusk to dawn light sensor.
  • light sensor switch.Easy to install, it can work with most types of light lamps, such as LED, incandescent, halogen and fluorescent bulb, etc.light control with photocell light sensor.
  • Dusk to Dawn Sensor Photoelectric Switch makes your lighting is only used when it should be. Helps to increase energy efficiency and bulb life by reducing daily operating life.neutral night and day sensor.
  • Dusk to Dawn Sensor Photoelectric Switch is ideal for putting outdoor lighting, controls driveway and walkway lighting, post lamps, pole lanterns, coach and entry way porch lights.pc 100 photoelectric switch.
Check Stock

Isolation Amplifiers 4.5 - 5.5 SV 8 dB (5 pieces)

  • Isolate and amplify the weak control signal (only a few milliamps of current) by photoelectricity, and finally output a higher power control signal to directly drive the motor, contactor, solenoid valve, etc..
  • The response time is as low as milliseconds and there is no limit on the number of switches. It can directly replace traditional relays, reducing maintenance time and costs..
  • Photoelectric isolation is used between the input stage and the output stage, and the two stages are completely independent, which effectively avoids the instability caused by mutual interference of the system and effectively protects the output node of.
  • Made of high-quality electronic components, stable and reliable performance..
  • Hole punching and PCB module mounting are more convenient..
Check Stock

Fosmon Wireless Remote Control Electrical Outlet Switch (2 Pack) - ETL Listed, (15A, 125V 1875W) Remote Light Switch Outlet Plug with Braille (On/Off) Mark for Lamp, Lights, Fans, Expandable

  • Photoelectric design: photo eye light sensor is reliable and quality, weatherproof and anti-rust, stable and safe, you can use with confidence.
  • Built-in external photosensitive switch, also applied as a small and rainproof street light controller photoelectric switch.
  • Intelligent detection design: this light sensor photocell turns on your exterior lights at dusk and dawn, automatically control lighting according to ambient lighting levels.
  • The internal design has an automatic ambient light level detection circuit that automatically switches off during the day and on at night.
  • Waterproof to withstand bad weather: equipped with a waterproof cap, photo eye sensor for outdoor lights is designed to double protect the sensor lens, assists the conversion to work better in harsh environments, like rainy, windy, snow day and so on.
  • Multiple compatibility: light switch daylight sensor's voltage is 120V AC, can be compatible with most lamps, such as incandescent, fluorescent, CFL, HPS, LED.
  • Remember that LEDs operate on DC power, other voltages are not suitable.
  • Broad utilization: dust to dawn sensor features time-delay detection circuit, accurate detection of natural light, no accidental light, such as oncoming traffic lights, can be applied to street lights, dome....
Check Stock

FYSETC 3D Printer Parts and Accessories Limit Switch Mechanical Switch Module Endstops with 3 Pins 39.4 inch Cable for Ramps RepRap Tev Tornad- 3 Pcs

  • Original Tornad 3D Printer Parts, Optical Endstop switch with 1M Photoelectric Light Control.
  • Endstops for 3D Printer: used for Tev, if you want to in all crealty 3D Printer, CR -10 CR 10S S4 ,S5, please research another item: B07ZCSXNF3.
  • Must 3D Printer Limits: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch.
  • Warm Tips: Generally, the printer DIY system need at least three optical switches.
  • What you get? 3Pcs endstop with connect cables.
Check Stock

VELLEDQ Field Assembly Sensor/Actuator Panel Mount Connector M12 5-Pin Male A-Coding Rear Flange Joint

  • Connector locking system: M12, Panel locking system: M16, Coding: A-coding interface, Contacts: 5 pins layout, Gender: Male, EMV compliance: Unshielding, Type: Rear flange panel mount..
  • Core material: Cu(Gold)+Zn, Core diameter: 26AWG / 0.25mm², Crimp range: 0.14-0.75mm², Termination: Welding, Tightening torque: 0.4Nm, Shell Meterial: Metal, Sealing: O-ring..
  • Rated voltage: 125V AC/DC, Current per contact ( 40 °C ): Max 4A, Volume resistivity: ≤3mΩ, Ambient temperature: -20℃~+80℃, Mehcanical operation: 003e100 mating cycles..
  • Standard: IEC 61076-2-101, Flame Retardant Rating: UL94-HB, IP Rating: IP67, Certification: CE / ISO 9001..
  • Perfect for the application on automated terminal connection, process control, and commercial electronic, can be easily connected to proximity switches, photoelectric barriers, flow monitoring devices, sensor devices and ctuator devices and field bus components..
Check Stock

VELLEDQ Industrial Field-wireable M12 Sensor Connector 8-Pin Female Adaptor PG 9 Cable Gland Screw Terminal Plug Fittings

  • M12 standard female thread connector, A-coding interface, screw terminals, industrial layout 8-core copper pins..
  • IP67 EN60529 in locked condition protection when pluggde and screwd down, no shielded function..
  • Rated voltage: 30V, Current per contact ( 40 °C ): Max 2A, Insulation resistance: ≥100MΩ, Contact resistance: ≤3MΩ, Temperature range ( Insulator / Wire ): -40 to 85°C / -30 to 80°C..
  • This product is perfect for the application on automated terminal connection, process control, and commercial electronic, can be easily connected to proximity switches, photoelectric barriers, flow monitoring devices, sensor devices and ctuator devices and field bus components.
  • Modern industrial production has increasingly stringent requirements for the safety, reliability, and rapid installation of the connection systems in all its aspects. We can provide customers with safe, reliable, convenient and quick overall connection scheme..
Check Stock

HiLetgo 3pcs E18-D80NK Infrared Photoelectric Switch Obstacle Avoidance Sensor Module

  • This is a collection of emission and reception in one photoelectric sensor..
  • Detection distance can be adjusted according to requirements..
  • The sensor has a detection range, interference by visible light small, easy to assemble, easy to use and so on..
  • Can be widely used in robot obstacle avoidance, assembly line and many other automated products..
  • Photoelectric sensor (photoelectric switch) NPN normally open..
Check Stock

FYSETC 3pcs Ender 3 Limit Switch Mechanical Endstop Module 3D Printer Part for CNC RepRap Makebot Prus RAMPS 1.4 Board Ender 3/Pro Ender 5 CR-10 S4 S5 Series

  • 3D Printer Accessories Limit Switch 3Pin N/O N/C control, replacement for Ender-3/CR-10/CR-10S/CR-S4/CR-S5/CR-10S Pro, Ender-3/Ender-3 Pro 3D printer..
  • Optical Endstops switch with 1M Photoelectric Light Control.
  • DIY Must-have 3D Printer switch: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch.
  • Maximum voltage: 125V, Maximum current: 1A. Size: 1.0x0.8 x 0.3in/2.6 x2 x 0.7cm. Small and compact size, easy installation, just plug and play.
  • What you get? 3Pcs endstops no include cables. Generally, the printer DIY system need at least three optical switches.
Check Stock

4 Pieces Photocell Sensor Switch Dusk to Dawn Photocell Sensor Outdoor Photoelectric Switch for Outdoor Wall Porch Light (120V)

  • Different styles: These photoelectric switch sensors are packaged with NK-GT120VAC 50/60Hz size.
  • Please check the product size before purchasing.
  • Easy to use: This photoelectric sensor switch automatically turns on the light at dusk and turns off the light at dawn, without manual operation.
  • The delay function of the outdoor light sensor prevents accidental triggering of the light due to the headlights of passing vehicles.
  • Compatible with LED, fluorescent, incandescent and other types of bulbs, so you can use this photoelectric switch sensor for most applications, such as outdoor lighting, outdoor lighting, road lighting, road lighting and doorway lighting.
  • Easy to install: using the rotary installation method, this outdoor light controller can be easily installed on the precise focusing lamp.
  • Just disconnect the power supply, put the screw wire of the switch into the faucet hole, and lock it with a rubber washer and zinc alloy nut fixed.
  • Adjustable design: the angle can be adjusted at will, the photoelectric tube can be rotated to achieve a beautiful light direction, and the light can be easily focused on the position you need.
Check Stock

3 Pack Smoke Detector Battery Operated with Photoelectric Sensor and Silence Button Travel Portable Smoke Alarm White

  • Sound LED warning：When the alarm senses products of combustion and goes into alarm,the red LED will flash rapidly(one flash per second).The rapid....
  • Photoelectric Technology: Our photoelectric smoke alarm with Photoelectric technology which is optimized to detect slow smoldering fires which....
  • Easy Installation: Can be installed in several minutes. Coming with screws and bracket. Powered by one 9V battery(included), it will not be affected....
  • Suitable for multiple places: This smoke alarm does not contain any radioactive material. Smoke alarms should be installed in every room (except the....
Check Stock

Omron E39-R1 Reflector for Use W/ E3F2 Photoelectric Sensors

  • M12 PNP NO ATO Through-beam photoelectric sensor consists of a light projector and a light receiver.
  • Infrared photoelectric sensor can distinguish the opaque reflective object, with a detection range, easy to assemble and use, and less susceptible to interference, long life and so on.
  • Material: Housing:Nickel plated brass, Detection surface (lens): PMMA.
  • Package Content: 1 Pair x Photoelectric Switch.
  • 【Customer First】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

EDISHINE Dusk to Dawn Sensor, 120V Lamp Post Light Sensor, Photoelectric Switch for Outdoor Pole Light, Automatic On/Off, Waterproof, UL Listed

  • 【Automatic Light Control】 Automatically switches on post light at dusk and off at dawn, no need manual operation. On level: 10-16 lux, Off Level: ＜65 lux, 30-180S sensor delay prevents accidental triggering of the other lights..
  • 【Easy to Replace & Mount】Exact replacement for your existing post light sensor, male-female connector design, plug and play, change the original sensor in seconds. 1-3/8" diameter mounting hole for easy installation..
  • 【Waterproof】High quality PC material, protects the sensor against from rain, snow, dust and abrasion, withstands years of use. Shock and erosion resistant, suitable for wet locations. Works with -40°C ~ +70°C Ambient Temp..
  • 【Wide Application】 Compatible with most bulbs: up to 1800W Tungsten/ 1800VA Ballast/ 5A E-Ballast. Works with most lamp posts, coach lights and pole lights. Black finish matches any apperance..
  • 【UL Listed】120V AC input voltage, 60Hz, threaded diameter 1-3/8" inch. The photoelectric switchis UL certified. DEWENWILS offers 24/7 troubleshooting and hassle-free return policies through Amazon.
Check Stock