Pelican 1120 Case With Foam (Desert Tan)

  • MULTI-PURPOSE HARD CASE – Crushproof, dustproof, watertight, universal hard case for the best outdoor protection of camera, GoPro, gear, equipment, electronics, drones, pistol, iphone, tablet and more. Great for lockable storage and protection.
  • FEATURES: Watertight, crushproof, and dustproof hard case with customizable Pick N Pluck foam. Has an O-Ring seal and automatic pressure equalization valve to balance interior pressure and keep water out. Has two hole design for cable or padlock.
  • DIMENSIONS (LxWxH Inches): Exterior 8.41 x 6.76 x 3.87 in | Interior 7.29 x 4.78 x 3.33 in – Weight 1.43 lbs.
  • MADE IN USA: Trusted protection in use by the military, divers, first responders (fire, police, EMT) since 1976.
  • Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring..
  • Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out..
  • Pelican’s Pick N’Pluck foam lets you customize the interior..
  • Stainless steel reinforced padlock protectors.
Check Stock

Seahorse 710 Heavy Duty Protective Dry Box Case With Foam - TSA Approved / Mil Spec / IP67 Waterproof / USA Made for Cameras Firearms Camping Laptops Consoles VR Yellow

  • Heavy Duty - This case is made from a high quality and high density polypropylene, so it can take a beating. Impact resistant, crushproof, dustproof....
  • Waterproof - Rated IP67 waterproof, each case is made to keep water out even when submerged. Each case can be submerged at a depth of 1 meter for 30....
  • Pick and Pluck Foam - The included pick and pluck foam provides plenty of protection for storing sensitive equipment and allows easy customization for....
  • Perfect for Any Use - Our cases are made to store and protect anything. Works great for protecting cameras, pistols, microphones, laptops, tablets....
  • Dimensions - (internal): 18.1” x 12.9” x 4.0” inches (external) 20.1” x 15.5” x 5.5” / weight 7.16 lbs.
Check Stock

Pelican 1032 Foam Set

  • An easy do-it-yourself system for customizing the interior of you Pelican case.
  • Contents stay in place and get extra protection at the same time..
  • Pick N' Pluck foam for microcases gives you added protection for your valuable gear.
Check Stock

Pelican 1602 2-Piece Foam Set

  • 1602 Pick N Pluck replacement foam. Sections Only (set of 2) for 1600 Case.
  • An easy do-it-yourself system for customizing the interior of you Pelican case.
  • Contents stay in place and get extra protection at the same time.
  • Layers of foam are pre-scored into cubes.
Check Stock

Pelican 1171 3 Piece Foam Set for 1170

  • 1171 3 -Piece Replacement Pick N Pluck Foam Set for 1170 Case.
  • An easy do-it-yourself system for customizing the interior of you Pelican case.
  • Contents stay in place and get extra protection at the same time.
  • Layers of foam are pre-scored into cubes.
Check Stock

Foam Game Plus Pluck Tray Storage Case (4 Inch)

  • LifePod 2.0 Pluck Foam upgrade. Create the perfect fit..
  • Use pluck foam to create custom pocket shapes for handgun(s), magazines, EDC gear, and more..
  • 5-Piece full foam upgrade set comes with (2) pluck foams, (1) additional crate foam piece, and (2) additional thin foam pieces for extra bottom cushioning as needed..
  • Use pluck foam in the tray as well as under the tray, or swap out foam inserts altogether for a second setup. .
Check Stock

Plano 36 All Weather Tactical Case 108364 Replacement Foam Inserts 1 Piece

  • FOAM INSERT: Our gun storage foam is pre-cut and customizable with a pick-and-pluck design. Foam only, case not included.
  • FITS: Our gun case foam is designed for the HQ Issue Rifle/Bow carrying case but will fit any hard gun case with the same interior dimensions.
  • DIMENSIONS: The foam insert fits any case with interior dimensions of 44"l. x 18"w. x 6"h.
  • CUSHIONING: Our foam inserts for cases provide shock absorption, cushioning and damage prevention for your rifle or bow.
  • DURABLE: Pre-cut from a durable military-grade gun foam.
Check Stock

Pelican 1495 Laptop Case Black

  • PREMIUM LAPTOP HARD CASE: Compatible with 17 inch laptops, MacBook Air, and select MacBook Pro models.
  • FEATURES: Watertight, crushproof, dustproof hard case design, customizable Pick N Pluck foam and convoluted lid foam. Includes 3 dial combination....
  • DIMENSIONS (LxWxH Inches): Exterior 21.62 x 17.25 x 4.87 | Interior 18.87 x 13.12 x 3.81 - Weight 8.37 lbs.
  • MADE IN USA: Trusted protection in use by the military, divers, first responders (fire, police, EMT) since 1976.
Check Stock

Pelican 1510 Case With Padded Dividers Black

  • Watertight with Automatic Pressure Equalization Valve.
  • Single Layer padded dividers with Velcro adjustments.
  • Exterior Dimensions: 22"L x 13.81"W x 9"D (55.9 x 35.1 x 22.9 cm).
  • Interior Dimensions: 19.75" x 11.00" x 7.60" (50.1 x 27.9 x 19.3 cm).
  • Foam Layer 1 (Lid)-1.81 inch (Convolute), Foam Layer 2 (Base)-2.63 inch-Pick N Pluck ( 0.75 inch x .50 inch squares), Foam Layer 3 (Base)-2.63 inch ( 0.75 inch x .50 inch squares), Foam Layer 4 (Base)-0.50 inch (Solid).
Check Stock

HQ Issue Gun Case Rifle Case Bow Case Replacement Foam Customizable Foam Insert

  • FOAM INSERT: Our gun storage foam is pre-cut and customizable with a pick-and-pluck design. Foam only, case not included.
  • FITS: Our gun case foam is designed for the HQ Issue Rifle/Bow carrying case but will fit any hard gun case with the same interior dimensions.
  • DIMENSIONS: The foam insert fits any case with interior dimensions of 44"l. x 18"w. x 6"h.
  • CUSHIONING: Our foam inserts for cases provide shock absorption, cushioning and damage prevention for your rifle or bow.
  • DURABLE: Pre-cut from a durable military-grade gun foam.
Check Stock

HQ Issue Pistol Case Gun Case Replacement Foam Customizable Foam Insert

  • FOAM INSERT: Our foam insert is suitable for use with pistol cases for handguns. It’s pre-cut and customizable with a pick-and-pluck design. Foam....
  • FITS: Our gun case foam is designed for the HQ Issue Handgun Carry Case but will fit any tactical pistol hard gun case with the same interior....
  • DIMENSIONS: The foam insert fits any case with interior dimensions of 14.75"w. x 10"d. x 7"h. Can be cut to fit a wide range of cases.
  • CUSHIONING: Our foam inserts for cases provide shock absorption, cushioning and damage prevention for your pistol.
  • DURABLE: Pre-cut from a durable military grade gun foam.
Check Stock

Pelican 1085 Laptop Case With Foam Black

  • PREMIUM LAPTOP HARD CASE: Compatible with 14 inch laptops, MacBook Air, and select MacBook Pro models.
  • FEATURES: Watertight, crushproof, dustproof hard case design with customizable Pick N Pluck foam and convoluted lid foam. Has an O-Ring seal and automatic pressure equalization valve to balance interior pressure and keep water out.
  • DIMENSIONS (LxWxH Inches): Exterior 15.64 x 12.41 x 2.50 | Interior 14.29 x 10.37 x 1.97 - Weight 3.10 lbs.
  • MADE IN USA: Trusted protection in use by the military, divers, first responders (fire, police, EMT) since 1976.
Check Stock

3 Pcs Pick Pluck Foam Pre Cubed Foam Insert for Interlocking Cases Tool Box Foam Padding with Separated Bottom for Camera Packing Storage Board Games, 16 x 12 x 2 Inch

  • ...ormation: our foam inserts for cases come with a total size of about 16 x 12 x 2 inches, the top is about 4 cm/ 1.6 inches in thickness, with 1/2 inch precut grid configuration, easy for you to pick cubes by hand, and the separated bottom base is approx. 10 mm/ 0.4 inches in thickness.
  • Quality Material: our pick and pluck foam is made of charcoal urethane foam, which is soft in texture and can provide cushion for fragile and valuable items in different directions, so that they can keep in place sturdily and get rid of jarring and sudden impacts.
  • Provide Protection: the toolbox foam inserts are ideal for keeping your fragile and important items, applicable for protecting them in transit to avoid potential impacts, suitable for protecting cameras, tools and other stuff in your suitcase.
  • Convenient to Use: these foam divider inserts adopt pre cubed design for easy adjustment, you just need to pull and pick away foam blocks to DIY the pad shape to match your product, no need for die cutting or extra complete steps.
  • Ideal Case Additions: our tool box foam comes with an easy to see grid and allows you to plan your layout easily, you can insert it into a tool box and remove foam cubes to proper shapes, no worry about inner ....
Check Stock