Categories

Best Pilot Counterbore Reamers

8 Pack Woodworking Countersink Drill Bits Set 3in1 Heavy Duty M2 Pilot Drill Bits Depth Adjustable 82-Degree Chamfer 1/4” Hex Shank for #4#6#8#10#12#14 Screws in Soft & Hard Wood

  • 3in1 Countersink Drill Bit Set – Enable you to Drill, Countersink and Counterbore in one step, ideal woodworking tools for setting screws flush with....
  • Meet All Your Needs–8 pcs Countersink drill bits assortment in size 5/64”, 3/32”, 7/64”, 1/8” (x2), 9/64” (x2), 5/32” for perfect....
  • Easy To Use–3 sharp edged 82-degree chamfer design Counter sink bits built with 1/4" Hex Shanks with groove for quick size changes without bit....
  • Drilling Depth Adjustable–Extra Pilot bits included.
  • Working length of the pilot drill bit is adjustable for precise depth control.
  • Compatible with More Materials – Pilot bits are made of high quality M2 steel, countersink bits make of high carbon steel, able to drill in hard....
Check Stock

BOSCH SP515 5 Piece Hex Shank Countersink Drill Bit Set with #6 #8 #10 and #12

  • VERSATILITY: Bosch hex shank countersink bits feature adjustable depths and provide precise, clean pilot holes in wood, plastic and composite materials.
  • 3 in 1: Drill, Countersink and Counterbore in one step.
  • UNIVERSAL FIT: The Bosch SP515 countersink set fits all Bosch and competitive brands drill/drivers.
  • USE WITH: For use with Allen wrench (included in set).
  • the hex shanks fit 3/8 in. and 1/2 in. corded and cordless drills.
  • ACCESSORIES: Replaceable bits offered (sold separately).
Check Stock

Drill America - DEWPIL1/4X3/16 DEWCBR Series Qualtech High-Speed Steel Pilot for Counterbore, 3/16\ Shank Diameter, 1-3/4\ Length, 1/4\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Available in 1-3/4-inches overall length.
Check Stock

uxcell Knurled Insert Nuts, M8 x 10mm(L) x 10mm(OD) Female Thread Brass Embedment Assortment Kit, 5 Pcs

  • [SIZE] - M8x1.25mm thread size, 0.39" (10mm) long, 0.39" 10mm outer diameter ,OD tolerance: +0.02"/0"..
  • [MATERIAL] - Made of brass, rust resistance, good thermal conductivity and heat resistance, can ensure long time using..
  • [FEATURE] - Can be installed by ultrasonic or heat into thread tapered hole, or in during injection..
  • [ADVANTAGE] - No need to counterbore or countersink the boss hole since the insert has guide pilot..
  • [APPLICATION] - Widely used on injection for fastening..
Check Stock

Drill America DEWCBR Series Qualtech High-Speed Steel Counterbore, 1/2\ Shank Diameter, 3/16\ Pilot, 5-1/8\ Length, 5/8\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Counterboring is the enlargement of a portion of a hole that has previously been formed.
  • The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.
Check Stock

DEWALT Drill Bit, #10 Countersink, 3/16-Inch (DW2539)

  • Drill, countersink and counterbore in one step with this drill bit.
  • Four-cutter countersink and tapered drill bits for wood, metal and plastic provide superior speed and ideal finish.
  • Replacement tapered bits offered for DEWALT drill bits.
  • Drill, countersink and counterbore in one step.
  • Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Drill America 5/8\ Bridge/Construction Reamer with 1/2\ Shank, DWR Series

  • Bridge Reamers are also called Construction Reamers.
  • Bridge reamers are used to align existing holes prior to bolt or rivet installation.
  • Point is tapered to permit entry into overlapping holes.
  • Short length facilitates use in areas with limited access with three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
  • High speed steel for use in a wide range of materials such as Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel.
Check Stock

Drill America 1-1/16 Bridge/Construction Reamer with 1/2 Shank DWR Series

  • Bridge Reamers are also called Construction Reamers.
  • Bridge reamers are used to align existing holes prior to bolt or rivet installation.
  • Point is tapered to permit entry into overlapping holes.
  • Short length facilitates use in areas with limited access with three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
  • High speed steel for use in a wide range of materials such as Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel.
Check Stock

Accusize Industrial Tools Premium Metric H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 509S-007M

  • High Speed Steel. Straight Shank. Metric Set(7 Pcs/Set): M3, M4, M5, M6, M8, M10, & M12.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Drill America 1-1/16 Hex Shank Black and Gold Long Bridge/Construction Reamer KFD Series

  • Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation. Black and gold Killer Force (KFD) hex shank bridge reamers are manufactured from premium grade high speed steel..
  • Point is tapered to permit entry into overlapping holes..
  • Heavy-duty hex shank has six flats and is designed for portable pneumatic tools.
Check Stock

LEIGH Box Joint & Beehive Router Jig, Model B975

  • ... duty compact pocket hole jig can be held by one hand, designed for portable or desktop installation, very suitable for DIY household projects or professional and general commercial use. DIY craftsmen use this fixture kit to build their own woodworking projects.
  • Simple and easy to use: Use a jig to drill an inclined counterbore in a joint. Then, screw the self-tapping screw (without pilot hole) into another part, and easily and quickly drill the inclined hole to hide the screw in the wooden furniture to form a precise woodworking hole to create or repair the wood joint.
  • 15 drill angle, 2-way tilt, to ensure accurate screw connection, and then embed the screw to prevent the screw from hiding. Allows you to easily hide screws/fasteners. The 10mm drill bit adapter can be easily replaced according to different sizes of wood types, positions and angles. Sharp drills with excellent performance, work smoothly and efficiently without burrs.
  • Complete pocket hole fixture system-fixture kit includes::1* pocket hole jig with clamp1* Step Drill Bit (replaceable)1* screwdriver (replaceable)1*steel stop collar1* square drive bit2* drivepipe1* Hex wrench 1* 6 in square drive bit20 coarse square drive screws20 fine square drive screws.
Check Stock